diff --git a/docs/source/conf.py b/docs/source/conf.py
index e5857f27..74c3af3f 100644
--- a/docs/source/conf.py
+++ b/docs/source/conf.py
@@ -260,6 +260,8 @@ autodoc_mock_imports = ['googlesamples.assistant.grpc.audio_helpers',
                         'twilio',
                         'pytz',
                         'Adafruit_Python_DHT',
+                        'RPi.GPIO',
+                        'RPLCD',
                         ]
 
 sys.path.insert(0, os.path.abspath('../..'))
diff --git a/platypush/plugins/lcd/__init__.py b/platypush/plugins/lcd/__init__.py
new file mode 100644
index 00000000..275e9239
--- /dev/null
+++ b/platypush/plugins/lcd/__init__.py
@@ -0,0 +1,246 @@
+from abc import ABC, abstractmethod
+from enum import Enum
+from typing import List, Optional
+
+from platypush.plugins import Plugin, action
+
+
+class PinMode(Enum):
+    import RPi.GPIO
+    BOARD = RPi.GPIO.BOARD
+    BCM = RPi.GPIO.BCM
+
+
+class LcdPlugin(Plugin, ABC):
+    """
+    Abstract class for plugins to communicate with LCD displays.
+
+    Requires:
+
+        * **RPLCD** (``pip install RPLCD``)
+        * **RPi.GPIO** (``pip install RPi.GPIO``)
+
+    """
+    import RPLCD.lcd
+
+    def __init__(self, **kwargs):
+        super().__init__(**kwargs)
+        self.lcd = None
+
+    @staticmethod
+    def _get_pin_mode(pin_mode: str) -> int:
+        pin_mode = pin_mode.upper()
+        assert hasattr(PinMode, pin_mode), \
+            'Invalid pin_mode: {}. Supported modes: {}'.format(
+                pin_mode, list([mode.name for mode in PinMode if mode.name != 'RPi']))
+
+        return getattr(PinMode, pin_mode).value
+
+    @abstractmethod
+    def _get_lcd(self) -> RPLCD.lcd.BaseCharLCD:
+        pass
+
+    def _init_lcd(self):
+        if self.lcd:
+            return
+
+        self.lcd = self._get_lcd()
+
+    @action
+    def close(self, clear: bool = False):
+        """
+        Close the handler to the LCD display and release the GPIO resources.
+
+        :param clear: Clear the display as well on close (default: False).
+        """
+        if self.lcd:
+            self.lcd.close(clear=clear)
+            self.lcd = None
+
+    @action
+    def clear(self):
+        """
+        Clear the LCD display.
+        """
+        self._init_lcd()
+        self.lcd.clear()
+
+    @action
+    def home(self):
+        """
+        Set cursor to initial position and reset any shifting.
+        """
+        self._init_lcd()
+        self.lcd.home()
+
+    @action
+    def shift_display(self, amount: int):
+        """
+        Set cursor to initial position and reset any shifting.
+        """
+        self._init_lcd()
+        self.lcd.shift_display(amount)
+
+    @action
+    def write_string(self, value: str, position: Optional[List[int]] = None):
+        """
+        Write a string to the display.
+
+        :param value: String to be displayed.
+        :param position: String position on the display as a 2-int list.
+        """
+        self._init_lcd()
+        if position:
+            self.lcd.cursor_pos = tuple(position)
+
+        self.lcd.write_string(value)
+
+    @action
+    def set_cursor_pos(self, position: List[int]):
+        """
+        Change the position of the cursor on the display.
+
+        :param position: New cursor position, as a list of two elements.
+        """
+        self._init_lcd()
+        self.lcd.cursor_pos = tuple(position)
+
+    @action
+    def set_text_align(self, mode: str):
+        """
+        Change the text align mode.
+
+        :param mode: Supported values: ``left``, ``right``.
+        """
+        modes = ['left', 'right']
+        mode = mode.lower()
+        assert mode in modes, 'Unsupported text mode: {}. Supported modes: {}'.format(
+            mode, modes)
+
+        self._init_lcd()
+        self.lcd.text_align_mode = mode
+
+    @action
+    def enable_display(self):
+        """
+        Turn on the display.
+        """
+        self._init_lcd()
+        self.lcd.display_enabled = True
+
+    @action
+    def disable_display(self):
+        """
+        Turn off the display.
+        """
+        self._init_lcd()
+        self.lcd.display_enabled = False
+
+    @action
+    def toggle_display(self):
+        """
+        Toggle the display state.
+        """
+        self._init_lcd()
+        self.lcd.display_enabled = not self.lcd.display_enabled
+
+    @action
+    def enable_backlight(self):
+        """
+        Enable the display backlight.
+        """
+        self._init_lcd()
+        self.lcd.backlight_enabled = True
+
+    @action
+    def disable_backlight(self):
+        """
+        Disable the display backlight.
+        """
+        self._init_lcd()
+        self.lcd.backlight_enabled = False
+
+    @action
+    def toggle_backlight(self):
+        """
+        Toggle the display backlight on/off.
+        """
+        self._init_lcd()
+        self.lcd.backlight_enabled = not self.lcd.backlight_enabled
+
+    @action
+    def create_char(self, location: int, bitmap: List[int]):
+        """
+        Create a new character.
+        The HD44780 supports up to 8 custom characters (location 0-7).
+
+        :param location: The place in memory where the character is stored.
+            Values need to be integers between 0 and 7.
+        :param bitmap: The bitmap containing the character. This should be a
+            list of 8 numbers, each representing a 5 pixel row.
+
+        Example for the smiley character:
+
+            .. code-block:: python
+
+                [
+                    0,   # 0b00000
+                    10,  # 0b01010
+                    10,  # 0b01010
+                    0,   # 0b00000
+                    17,  # 0b10001
+                    17,  # 0b10001
+                    14,  # 0b01110
+                    0    # 0b00000
+                ]
+
+        """
+        self._init_lcd()
+        self.lcd.create_char(location=location, bitmap=tuple(bitmap))
+
+    @action
+    def command(self, value: int):
+        """
+        Send a raw command to the LCD.
+
+        :param value: Command to be sent.
+        """
+        self._init_lcd()
+        self.lcd.command(value)
+
+    @action
+    def write(self, value: int):
+        """
+        Write a raw byte to the LCD.
+
+        :param value: Byte to be sent.
+        """
+        self._init_lcd()
+        self.lcd.write(value)
+
+    @action
+    def cr(self):
+        """
+        Write a carriage return (``\\r``) character to the LCD.
+        """
+        self._init_lcd()
+        self.lcd.cr()
+
+    @action
+    def lf(self):
+        """
+        Write a line feed (``\\n``) character to the LCD.
+        """
+        self._init_lcd()
+        self.lcd.lf()
+
+    @action
+    def crlf(self):
+        """
+        Write a carriage return + line feed (``\\r\\n``) sequence to the LCD.
+        """
+        self._init_lcd()
+        self.lcd.crlf()
+
+
+# vim:sw=4:ts=4:et:
diff --git a/platypush/plugins/lcd/gpio.py b/platypush/plugins/lcd/gpio.py
new file mode 100644
index 00000000..2f172087
--- /dev/null
+++ b/platypush/plugins/lcd/gpio.py
@@ -0,0 +1,85 @@
+from typing import List, Optional
+
+from platypush.plugins import action
+from platypush.plugins.lcd import LcdPlugin
+
+
+class LcdGpioPlugin(LcdPlugin):
+    """
+    Plugin to write to an LCD display connected via GPIO.
+
+    Requires:
+
+        * **RPLCD** (``pip install RPLCD``)
+        * **RPi.GPIO** (``pip install RPi.GPIO``)
+
+    """
+
+    def __init__(self, pin_rs: int, pin_e: int, pins_data: List[int],
+                 pin_rw: Optional[int] = None, pin_mode: str = 'BOARD',
+                 pin_backlight: Optional[int] = None,
+                 cols: int = 16, rows: int = 2,
+                 backlight_enabled: bool = True,
+                 backlight_mode: str = 'active_low',
+                 dotsize: int = 8, charmap: str = 'A02',
+                 auto_linebreaks: bool = True,
+                 compat_mode: bool = False, **kwargs):
+        """
+        :param pin_rs: Pin for register select (RS).
+        :param pin_e: Pin to start data read or write (E).
+        :param pins_data: List of data bus pins in 8 bit mode (DB0-DB7) or in 4
+            bit mode (DB4-DB7) in ascending order.
+        :param pin_mode: Which scheme to use for numbering of the GPIO pins,
+            either ``BOARD`` or ``BCM``. Default: ``BOARD``.
+        :param pin_rw: Pin for selecting read or write mode (R/W). Default:
+            ``None``, read only mode.
+        :param pin_backlight: Pin for controlling backlight on/off. Set this to
+            ``None`` for no backlight control. Default: ``None``.
+        :param cols: Number of columns per row (usually 16 or 20). Default: ``16``.
+        :param rows: Number of display rows (usually 1, 2 or 4). Default: ``2``.
+        :param backlight_enabled: Whether the backlight is enabled initially.
+            Default: ``True``. Has no effect if pin_backlight is ``None``
+        :param backlight_mode: Set this to either ``active_high`` or ``active_low``
+            to configure the operating control for the backlight. Has no effect if
+            pin_backlight is ``None``
+        :param dotsize: Some 1 line displays allow a font height of 10px.
+            Allowed: ``8`` or ``10``. Default: ``8``.
+        :param charmap: The character map used. Depends on your LCD. This must
+            be either ``A00`` or ``A02`` or ``ST0B``. Default: ``A02``.
+        :param auto_linebreaks: Whether or not to automatically insert line
+            breaks. Default: ``True``.
+        :param compat_mode: Whether to run additional checks to support older LCDs
+            that may not run at the reference clock (or keep up with it).
+            Default: ``False``.
+        """
+        super().__init__(**kwargs)
+
+        self.pin_mode = self._get_pin_mode(pin_mode)
+        self.pin_rs = pin_rs
+        self.pin_e = pin_e
+        self.pin_rw = pin_rw
+        self.pin_backlight = pin_backlight
+        self.pins_data = pins_data
+        self.cols = cols
+        self.rows = rows
+        self.backlight_enabled = backlight_enabled
+        self.backlight_mode = backlight_mode
+        self.dotsize = dotsize
+        self.auto_linebreaks = auto_linebreaks
+        self.compat_mode = compat_mode
+        self.charmap = charmap
+
+    def _get_lcd(self):
+        from RPLCD.gpio import CharLCD
+        return CharLCD(cols=self.cols, rows=self.rows, pin_rs=self.pin_rs,
+                       pin_e=self.pin_e, pins_data=self.pins_data,
+                       numbering_mode=self.pin_mode, pin_rw=self.pin_rw,
+                       pin_backlight=self.pin_backlight,
+                       backlight_enabled=self.backlight_enabled,
+                       backlight_mode=self.backlight_mode,
+                       dotsize=self.dotsize, charmap=self.charmap,
+                       auto_linebreaks=self.auto_linebreaks,
+                       compat_mode=self.compat_mode)
+
+
+# vim:sw=4:ts=4:et:
diff --git a/platypush/plugins/lcd/i2c.py b/platypush/plugins/lcd/i2c.py
new file mode 100644
index 00000000..1b6b85cb
--- /dev/null
+++ b/platypush/plugins/lcd/i2c.py
@@ -0,0 +1,82 @@
+from typing import List, Optional
+
+from platypush.plugins import action
+from platypush.plugins.lcd import LcdPlugin
+
+
+class LcdI2cPlugin(LcdPlugin):
+    """
+    Plugin to write to an LCD display connected via I2C.
+    Adafruit I2C/SPI LCD Backback is supported.
+
+    Warning: You might need a level shifter (that supports i2c)
+    between the SCL/SDA connections on the MCP chip / backpack and the Raspberry Pi.
+    Or you might damage the Pi and possibly any other 3.3V i2c devices
+    connected on the i2c bus. Or cause reliability issues. The SCL/SDA are rated 0.7*VDD
+    on the MCP23008, so it needs 3.5V on the SCL/SDA when 5V is applied to drive the LCD.
+    The MCP23008 and MCP23017 needs to be connected exactly the same way as the backpack.
+    For complete schematics see the adafruit page at:
+    https://learn.adafruit.com/i2c-spi-lcd-backpack/
+    4-bit operation. I2C only supported.
+
+    Pin mapping::
+
+    7  | 6  | 5  | 4  | 3  | 2 | 1  | 0
+    BL | D7 | D6 | D5 | D4 | E | RS | -
+
+    Requires:
+
+        * **RPLCD** (``pip install RPLCD``)
+        * **RPi.GPIO** (``pip install RPi.GPIO``)
+
+    """
+
+    def __init__(self, i2c_expander: str, address: int,
+                 expander_params: Optional[dict] = None,
+                 port: int = 1, cols: int = 16, rows: int = 2,
+                 backlight_enabled: bool = True,
+                 dotsize: int = 8, charmap: str = 'A02',
+                 auto_linebreaks: bool = True, **kwargs):
+        """
+        :param i2c_expander: Set your I²C chip type. Supported: "PCF8574", "MCP23008", "MCP23017".
+        :param address: The I2C address of your LCD.
+        :param expander_params: Parameters for expanders, in a dictionary. Only needed for MCP23017
+            gpio_bank - This must be either ``A`` or ``B``
+                        If you have a HAT, A is usually marked 1 and B is 2.
+            Example: ``expander_params={'gpio_bank': 'A'}``
+        :param port: The I2C port number. Default: ``1``.
+        :param cols: Number of columns per row (usually 16 or 20). Default: ``16``.
+        :param rows: Number of display rows (usually 1, 2 or 4). Default: ``2``.
+        :param backlight_enabled: Whether the backlight is enabled initially.
+            Default: ``True``. Has no effect if pin_backlight is ``None``
+        :param dotsize: Some 1 line displays allow a font height of 10px.
+            Allowed: ``8`` or ``10``. Default: ``8``.
+        :param charmap: The character map used. Depends on your LCD. This must
+            be either ``A00`` or ``A02`` or ``ST0B``. Default: ``A02``.
+        :param auto_linebreaks: Whether or not to automatically insert line
+            breaks. Default: ``True``.
+        """
+        super().__init__(**kwargs)
+
+        self.i2c_expander = i2c_expander
+        self.address = address
+        self.expander_params = expander_params or {}
+        self.port = port
+        self.cols = cols
+        self.rows = rows
+        self.backlight_enabled = backlight_enabled
+        self.dotsize = dotsize
+        self.auto_linebreaks = auto_linebreaks
+        self.charmap = charmap
+
+    def _get_lcd(self):
+        from RPLCD.i2c import CharLCD
+        return CharLCD(cols=self.cols, rows=self.rows,
+                       i2c_expander=self.i2c_expander,
+                       address=self.address, port=self.port,
+                       backlight_enabled=self.backlight_enabled,
+                       dotsize=self.dotsize, charmap=self.charmap,
+                       auto_linebreaks=self.auto_linebreaks)
+
+
+# vim:sw=4:ts=4:et:
diff --git a/requirements.txt b/requirements.txt
index b9ff6370..c2737dd3 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -289,3 +289,7 @@ croniter
 # Support for DHT11/DHT22/AM2302 temperature/humidity sensors
 # git+https://github.com/adafruit/Adafruit_Python_DHT
 
+# Support for LCD display integration
+# RPi.GPIO
+# RPLCD
+
diff --git a/setup.py b/setup.py
index 84f99a73..0371af90 100755
--- a/setup.py
+++ b/setup.py
@@ -328,5 +328,7 @@ setup(
         'github': ['pytz'],
         # Support for DHT11/DHT22/AM2302 temperature/humidity sensors
         'dht': ['Adafruit_Python_DHT @ git+https://github.com/adafruit/Adafruit_Python_DHT'],
+        # Support for LCD display integration
+        'lcd': ['RPi.GPIO', 'RPLCD'],
     },
 )