Fixed ESP plugin extra args formatting

This commit is contained in:
Fabio Manganiello 2020-01-18 18:11:35 +01:00
parent c3c88b23fe
commit 2f63a861cb

View file

@ -276,6 +276,7 @@ class EspPlugin(Plugin):
def pin_on(self, pin: Union[int, str], pull_up: bool = False, **kwargs):
"""
Set the specified PIN to HIGH.
:param pin: GPIO PIN number or configured name.
:param pull_up: Set to True if the PIN has a (weak) pull-up resistor attached.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
@ -294,6 +295,7 @@ pin.on()
def pin_off(self, pin: Union[int, str], pull_up: bool = False, **kwargs):
"""
Set the specified PIN to LOW.
:param pin: GPIO PIN number.
:param pull_up: Set to True if the PIN has a (weak) pull-up resistor attached.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
@ -312,6 +314,7 @@ pin.off()
def pin_toggle(self, pin: Union[int, str], pull_up: bool = False, **kwargs):
"""
Toggle a PIN state - to HIGH if LOW, to LOW if HIGH.
:param pin: GPIO PIN number or configured name.
:param pull_up: Set to True if the PIN has a (weak) pull-up resistor attached.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
@ -333,6 +336,7 @@ else:
def pin_read(self, pin: Union[int, str], out: bool = False, pull_up: bool = False, **kwargs) -> bool:
"""
Get the ON/OFF value of a PIN.
:param pin: GPIO PIN number or configured name.
:param out: Treat the PIN as an output PIN - e.g. if you usually write to it and now want to read the
value. If not set, then the PIN will be treated as an input PIN.
@ -416,6 +420,7 @@ pin.duty({duty})
def pwm_on(self, pin: Union[int, str], freq: Optional[int] = None, duty: Optional[int] = None, **kwargs):
"""
Set the specified PIN to HIGH.
:param pin: GPIO PIN number or configured name.
:param freq: PWM PIN frequency.
:param duty: PWM PIN duty cycle.
@ -821,6 +826,7 @@ uart.read(*args)
def get_freq(self, **kwargs) -> int:
"""
Get the frequency of the device in Hz.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''
@ -870,6 +876,7 @@ machine.soft_reset()
def disable_irq(self, **kwargs):
"""
Disable interrupt requests.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''
@ -882,6 +889,7 @@ machine.disable_irq()
def enable_irq(self, **kwargs):
"""
Enable interrupt requests.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''
@ -975,6 +983,7 @@ webrepl._webrepl.password({password})
def wifi_connect(self, essid: str, passphrase: str, **kwargs):
"""
Connect the device WiFi interface to the specified access point.
:param essid: WiFi ESSID.
:param passphrase: WiFi passphrase.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
@ -1091,6 +1100,7 @@ print(json.dumps(list(wlan.ifconfig())))
def wifi_enable(self, **kwargs):
"""
Enable the device WiFi interface.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
self.net_enabled_change('network.STA_IF', True, **kwargs)
@ -1099,6 +1109,7 @@ print(json.dumps(list(wlan.ifconfig())))
def wifi_disable(self, **kwargs):
"""
Disable the device WiFi interface.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
self.net_enabled_change('network.STA_IF', False, **kwargs)
@ -1107,6 +1118,7 @@ print(json.dumps(list(wlan.ifconfig())))
def wifi_disconnect(self, **kwargs):
"""
Disconnect from the currently connected WiFi network
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''
@ -1120,6 +1132,7 @@ wlan.disconnect()
def ap_enable(self, **kwargs):
"""
Enable the device WiFi access point interface.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
self.net_enabled_change('network.AP_IF', True, **kwargs)
@ -1128,6 +1141,7 @@ wlan.disconnect()
def ap_disable(self, **kwargs):
"""
Disable the device WiFi access point interface.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
self.net_enabled_change('network.AP_IF', False, **kwargs)
@ -1181,6 +1195,7 @@ print(json.dumps(config))
def wifi_scan(self, **kwargs) -> List[EspWifiScanResult]:
"""
Scan the available networks.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''
@ -1343,6 +1358,7 @@ print(json.dumps({k.decode(): v.decode() for k, v in db.items()}))
def set_ntp_time(self, **kwargs):
"""
Set the device time using an NTP server.
:param kwargs: Parameters to pass to :meth:`platypush.plugins.esp.EspPlugin.execute`.
"""
code = '''