Display entire message envelope in a user-friendly dialog popup with the
:envelope command. All header fields can be displayed with the -h flag.
Fixes: https://todo.sr.ht/~rjarry/aerc/85
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
A little coding hygiene cannot hurt. Add a simple awk script to check
all source files for bad white space habits:
- trailing white space
- trailing new lines at the end of files
- missing new line at the end of files
- spaces followed by tabs
The script outputs color when the terminal supports it. It exits with
a non-zero code when there was at least one white space issue found.
Call the script in the lint step.
Example output of the awk script:
config/default_styleset:1:# <-- trailing whitespace
config/default_styleset:3:# <-- trailing whitespace
doc/aerc.1.scd:78: Executes an arbitrary command in the background. Aerc will set the <-- trailing whitespace
doc/aerc.1.scd:234: <-- trailing whitespace
doc/aerc.1.scd:237: <-- trailing whitespace
worker/types/thread_test.go:74: // return ErrSkipThread<-- space(s) followed by tab(s)
worker/lib/testdata/message/invalid/hexa: trailing new line(s)
Fix issues reported by the script.
NB: The ENDFILE match is a GNU extension. It will be ignored on BSD-awk
and trailing new lines will not be detected. The lint make target is
only invoked on alpine linux which has GNU awk anyway.
NB: Empty cells in scdoc tables require trailing white space... Avoid
this by setting content in these cells. I don't really see a use for
empty cells.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Update aerc(1) to state that check-mail-cmd is only required for using
check-mail within aerc.
Signed-off-by: Ben Cohen <ben@bencohen.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Add :split and :vsplit commands, which split the message list view to
include a message viewer. Each command takes an int, or a delta value
("+1", "-1"). The int value is the resulting size of the message list,
and a new message viewer will be displayed below / to the right of the
message list. This viewer *does not* set seen flags.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
In order to make things easier for newcomers from notmuch, add a tag command
which is just an alias for modify-labels.
Signed-off-by: inwit <inwit@sindominio.net>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Add a peek flag -p to the view commands to open the message viewer
without setting the "seen" flag. If the flag is set, it would ignore the
"auto-mark-read" config.
The SetSeen flag will be propagated in case the message viewer moves on
to other messages, i.e. with the delete or archive commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Instead of xdg-open (or open on MacOS), allow forcing a program to open
a message part. The program is determined in that order of priority:
1) If :open has arguments, they will be used as command to open the
attachment. If the arguments contain the {} placeholder, the
temporary file will be substituted, otherwise the file path is added
at the end of the arguments.
2) If a command is specified in the [openers] section of aerc.conf for
the part MIME type, then it is used with the same rules of {}
substitution.
3) Finally, fallback to xdg-open/open with the file path as argument.
Update the docs and default config accordingly with examples.
Fixes: https://todo.sr.ht/~rjarry/aerc/64
Co-authored-by: Jason Stewart <support@eggplantsd.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Allow switching to next or previous account with switch-account -n and
switch-account -p, respectively. By default, these are bound to Alt-n
and Alt-p.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Koni Marti <koni.marti@gmail.com>
Switch accounts when in the composer mode. When switching accounts, the
From header, the crypto status and the address completer will be
updated.
Accounts can be switched with :switch-account <account-name>. The
completions for the switch-account command will list the available
accounts. If switch-account is run without arguments, the current
account name with the correct usage is displayed.
Fixes: https://todo.sr.ht/~rjarry/aerc/72
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
zoxide is a command line utility, supported by many CLI programs. Enable
zoxide support via the :z command which is a drop-in replacement for :cd
(and calls ChangeDirectory in the background), but also manages adding
paths to and querying from the zoxide database. The command is not
registered if zoxide is not on $PATH.
Link: https://github.com/ajeetdsouza/zoxide
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable path globbing using Go's standard library globbing capabilities,
which allows for attaching multiple files at once.
Suggested-by: Anderson John Njahi <johnjahi55@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Make it possible to specify which account(s) to load. Preserve listed
order when creating account tabs.
aerc -a <account-name[,account-name]>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Mark or unmark the shown message threads. Threads must be available in the
message store. Use the -T option for the mark or unmark commands. Can be
used in combination with the toggle flag (-t).
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When entering visual selection mode, the current selection is deleted.
This patch extends the visual mode behavior to select multiple blocks of
messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Specify an account parameter in the mailto argument. If not specified,
the selected account is used as default.
Example:
$ aerc 'mailto:user@host?account=Fastmail'
Suggested-by: staceee
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add :check-mail command for ad-hoc checking of mail. Reset timer for
automatic checking if it is enabled.
Suggested-by: staceee
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add a mode that prevents aerc from quitting normally when an important
task is performed, i.e. when sending a message. The no-quit mode will be
ignored when quit is used with the -f option to force an exit.
Suggested-by: ph14nix[m]
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all messages from an mbox file to the selected folder with the
import-mbox command.
User confirmation is required when the folder already contains messages.
A failed append will be retried a few times. If a backend timeout
occurs, the entire import is stopped to prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Export all message in the current folder to an mbox file. If an error
occurs during the export, aerc retries a few times before giving up to
prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all non-multipart attachments with the -A flag. Rename the flag
for forwarding a full message as an RFC2822 attachments to -F.
Suggested-by: psykose
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
In order to better align to vim functionality: deselect visual mode
selections after performing a command on the selection. This patch also
introduces a new command to allow for re-selecting (remarking) the
previous selection set so that commands can be chained together. The
deselection only applies to msg commands that *do not* move the message
from the store (those types of commands already deselect):
- read/unread
- flag/unflag
- modify-labels
- copy
- pipe
Previous usage to mark several messages as read and deselect all:
Vjjj:read<Enter>:unmark -a<Enter>
New usage, similar to vim:
Vjjj:read<Enter>
To chain a command together:
Vjjj:read<Enter>:remark<Enter>{next command}<Enter>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Reply to iCalendar invitations with three commands: :accept,
:accept-tentative or :decline. Parse a text/calendar request, create a
reply and append it to the composer.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add compose command ("attach-key") to attach the public key associated
with the sending account. Public key is attached in ascii armor format,
with the mimetype set according to RFC 3156 ("application/pgp-keys").
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Keep current message selected when clearing or changing filters and when
toggling threads.
Add -s flag to the clear command to also clear the selected message and
set cursor to the top of the message list.
Implements: https://todo.sr.ht/~rjarry/aerc/36
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Allow saving all message parts that have the content disposition
"attachment" header to a folder.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
When messages are marked, pipe their contents into the specified
command. The messages are ordered according to their respective
Message-Id headers. This allows applying complete patch series with
a single command.
When piping more than one message, make sure to write them in the mbox
format as git am expects them to be.
Link: https://en.wikipedia.org/wiki/Mbox
Link: https://github.com/git/git/blob/v2.35.1/builtin/mailsplit.c#L15-L44
Signed-off-by: Robin Jarry <robin@jarry.cc>
Reviewed-by: Koni Marti <koni.marti@gmail.com>
Tested-by: akspecs <akspecs@gmail.com>
implement message threading on the message store level using the
jwz algorithm. Build threads on-the-fly when new message headers arrive.
Use the references header to create the threads and the in-reply-to
header as a fall-back option in case no references header is present.
Does not run when the worker provides its own threading (e.g. imap
server threads).
Include only those message headers that have been fetched and are
stored in the message store.
References: https://www.jwz.org/doc/threading.html
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Inwit <inwit@sindominio.net>
Tested-by: akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
add the expand-folder and collapse-folder commands to navigate the
directory tree view. Provide keybinds for a vi-like folder navigation
experience.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Recall fails when called outside of the "postpone" folder (usually
"Drafts"). This makes sense for postponed messages. However, sometimes
the user would like to re-edit and re-send an old, possibly sent,
message, which would serve as a basis for the new one.
This patch allows recall to work outside the postpone folder, thus
allowing for re-edition of any message.
In the original recall function, if the recalled message is found in the
"postpone" folder, once the message has been recalled, re-edited and
sent, the original draft is deleted. With this patch, when the message
is not in the "postpone" folder, the original message is not deleted.
Signed-off-by: inwit <inwit@sindominio.net>
* Get rid of open_darwin
It just lead to code duplication for a simple one string change.
Instead we query it during initialization
* Accept user provided arguments
"open" on MacOS accepts things like -A to use a specific application
Pass trough arguments the user provided in order to facilitate this
* Refactor the function to a struct
This makes it more convenient for the caller and avoids signatures like
lib.OpenFile(nil, u.String(), nil) which are fairly unreadable
The `pin-tab` and `unpin-tab` global commands were added in 3156d48
but were not previously documented. This documents them in aerc.1.
I added them with the other tab commands, which appeared to be grouped
as a logical unit.
The `:rmdir` command removes the current directory (`-f` is required if
the directory is not empty).
This is not supported on the notmuch backend.
An issue with the maildir backend is that some sync programs (e.g.
offlineimap) may recover the directory after it is deleted. They need
to specifically be configured to accept deletions, or special commands
need to be executed (e.g. `offlineimap --delete-folder`) to properly
delete folders.
A danger of using this on the IMAP backend is that it is possible for a
new message to be added to the directory and for aerc to not show it
immediately (due to a slow connection) - using `:rmdir` at this moment
(with `-f` if the directory already contains messages) would delete the
directory and the new message that just arrived (and all other
contents). This is documented in aerc(1) so that users are aware of
possible risks.
More mail flags can now be set, unset, and toggled, not just the
read/seen flag.
This functionality is implemented with a new `:flag` and `:unflag`
command, which are extensions to the matching `:read` and `:unread`
commands, adding support for different flags. In fact, the
`read`/`unread` commands are now recognized aliases to `flag`/`unflag`.
The new commands are also well documented in aerc(1).
The change mostly extends the previous read/unread setting functionality
by adding a selection for the flag to change.
This command uses the Postpone folder from the account config to save
messages to. Messages are saved as though they were sent so have a valid
'to' recipient address and should be able to be read back in for later
editing.
