The split command allows delta size changes, which triggers a condition
where the split can overflow into the dirlist. Clamp the minimum size of
a split or vsplit to "1" to prevent the view from overflowing, or
completely covering the message list. A split of 0 will still clear the
split.
Reported-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Prevent panic when split is called but the msgstore is either not
initialized or has no UIDs. This condition could be triggered by calling
:split or :vsplit immediately at startup.
Use the same logic as the :view command, which could operate in a
similar manner.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The [v]split command panics when it is run with no message selected, or
when messages aren't loaded. Check for a valid selected message before
creating a split, and report an error if one isn't selected.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add :split and :vsplit commands, which split the message list view to
include a message viewer. Each command takes an int, or a delta value
("+1", "-1"). The int value is the resulting size of the message list,
and a new message viewer will be displayed below / to the right of the
message list. This viewer *does not* set seen flags.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Remove invalidatable type and all associated calls. All items can
directly invalidate the UI.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add a peek flag -p to the view commands to open the message viewer
without setting the "seen" flag. If the flag is set, it would ignore the
"auto-mark-read" config.
The SetSeen flag will be propagated in case the message viewer moves on
to other messages, i.e. with the delete or archive commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add option to open a message in the message viewer without setting the
seen flag. Enables the message viewer to be used as a preview pane
without changing the message flags unintentionally. Before, the message
viewer would set the seen flag by default. The IMAP backend will now
always fetch the message body with the peek option enabled (same as we
fetch the headers).
An "auto-mark-read" option is added to the ui config which is set to
true by default. If set the false, the seen flag is not set by the
message viewer.
Co-authored-by: "James Cook" <falsifian@falsifian.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since the minimum required version of Go has been bumped to 1.16, the
deprecation of io/ioutil can now be acted upon. This Commit removes the
remaining dependencies on ioutil and replaces them with their io or os
counterparts.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply GoDoc comment policy (comments for humans should have a space
after the //; machine-readable comments shouldn't)
Use strings.ReplaceAll instead of strings.Replace when appropriate
Remove if/else chains by replacing them with switches
Use short assignment/increment notation
Replace single case switches with if statements
Combine else and if when appropriate
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Add :check-mail command for ad-hoc checking of mail. Reset timer for
automatic checking if it is enabled.
Suggested-by: staceee
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix a regression introduced by commit c2f4404fca ("threading: enable
filtering of server-side threads"). Prior to this commit, a :sort
command (no args) would clear out the current sort criteria (or rather,
apply the value from the config). Restore this functionality.
Fixes: c2f4404fca ("threading: enable filtering of server-side threads")
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use the capabilities returned by the backend to check whether sort is
implemented when the user tries to use the sort command. Print a warning
to the log when a sort request is silently dropped by the backend.
Suggested-by: |cos|
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the message store architecture from an index-based to a uid-based
one. Key advantage of this design approach is that no reselect mechanism
is required anymore since it comes with the design for free.
Fixes: https://todo.sr.ht/~rjarry/aerc/43
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Append all messages from an mbox file to the selected folder with the
import-mbox command.
User confirmation is required when the folder already contains messages.
A failed append will be retried a few times. If a backend timeout
occurs, the entire import is stopped to prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Export all message in the current folder to an mbox file. If an error
occurs during the export, aerc retries a few times before giving up to
prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch refactors reselection of a message during certain operations
(searching, filtering, clearing, deleting, moving, new message arrival).
The addition of server-side filtering for threaded views broke the
existing reselection logic.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch enables the filtering of a threaded view which uses
server-built threads. Filtering is done server-side, in order to
preserve the use of server-built threads.
In adding this feature, the filtering of notmuch folders was brought up
to feature parity with the other workers. The filters function the same
(ie: they can be stacked). The notmuch filters, however, still use
notmuch syntax for the filtering.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit refactors the internal PGP implementation to make way for
GPG integration.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Clear filter when called with no arguments.
Fixes: https://todo.sr.ht/~rjarry/aerc/35
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Keep current message selected when clearing or changing filters and when
toggling threads.
Add -s flag to the clear command to also clear the selected message and
set cursor to the top of the message list.
Implements: https://todo.sr.ht/~rjarry/aerc/36
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
By using :compose -H <header> a user should be able to add
arbitrary headers to an email. The existing implementation from
5b523880b4 added the headers as lines
to the beginning of the body. These lines were not interpreted as
headers anywhere and ended up as plain text in the body of the email.
Fix the code to parse and add the headers correctly.
Signed-off-by: Evan Gates <evan.gates@gmail.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Keep the sort criteria applied to the selected folder until the default
sort order should be restored. Call the sort command without arguments
to restore the default sort order.
The current behavior is that the default sort order is restored as soon
as the folder reloads. This happens often and then the results of the
sort command are lost. This makes the sort command not very
user-friendly. Instead, we should keep the sort criteria applied until
the user explicitly wants to restore the default sort order again.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since panics still regularly "destroy" the terminal, it is hard to get a
stack trace for panics you do not anticipate. This commit adds a panic
handler that automatically creates a logfile inside the current working
directory.
It has to be added to every goroutine that is started and will repair
the terminal on a panic.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Make statusline folder-specific. Update filter, search and threading
status when changing folders.
Commit 2512c04 ("statusline: implement per-account status") introduced
an account-specific statusline. This makes it account- and
folder-specific.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Implement a statusline state for each account. Keep the ex line and the
push notifications global. Add account name prefix to push
notifications. Prefix status line with account name when multiple
accounts are available.
Use account-specific status line for each tab where an account is
defined.
Handle threading, filter/search, viewer passthrough and connection
status.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Remove code duplication and provide completion even when acct is nil
Signed-off-by: kt programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
aerc.SelectedAccount() is used in lots of places. Most of them without
checking the return value.
In some cases, the currently selected tab is not related to any account
(widget.Terminal for example). This can lead to unexpected crashes when
accessing account specific configuration.
When possible, return an error when no account is currently selected.
If no error can be returned, fallback to non-account specific
configuration.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Reviewed-by: Koni Marti <koni.marti@gmail.com>
add the expand-folder and collapse-folder commands to navigate the
directory tree view. Provide keybinds for a vi-like folder navigation
experience.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Add an extra attribute to the status line. When non-empty, display it
after the current status.
Set that extra status after a successful :search or :filter. Remove it
after :clear.
Signed-off-by: Robin Jarry <robin@jarry.cc>
The status is not cleared. It is annoying.
Fixes: c37f1eaaea ("filter/search: display current search/filter arguments")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Make the statusbar message after search and filter completion more
informative by showing the full call that was used.
Signed-off-by: inwit <inwit@sindominio.net>
implements a recover command that searches the local temp dir for aerc
emails. If a file is found and selected, a new composer tab will open
with the file contents as the message body. No header data is stored in
the temp file and thus this information cannot be recovered.
Recover will not remove the temporary file unless the force flag (-f) is
explicitly used.
This recovery method only works when the editor buffer is saved to
disk and the Close() function of the composer has not been called yet.
Sending, postponing or quitting will call the Close() function which
removes the temporary file completely. After Close() is called, no
recovery is possible anymore.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Allow defining a default template to use when composing new messages.
Add an example to be used for new users.
Signed-off-by: Robin Jarry <robin@jarry.cc>
This change handles message parse errors by printing the error when the
user tries to view the message. Specifically only handling unknown
charset errors in this patch, but there are many types of invalid
messages that can be handled in this way.
aerc currently leaves certain messages in the msglist in the pending
(spinner) state, and I'm unable to view or modify the message. aerc also
only prints parse errors with message when they are initially loaded.
This UX is a little better, because you can still see the header info
about the message, and if you try to view it, you will see the specific
error.
The `:rmdir` command removes the current directory (`-f` is required if
the directory is not empty).
This is not supported on the notmuch backend.
An issue with the maildir backend is that some sync programs (e.g.
offlineimap) may recover the directory after it is deleted. They need
to specifically be configured to accept deletions, or special commands
need to be executed (e.g. `offlineimap --delete-folder`) to properly
delete folders.
A danger of using this on the IMAP backend is that it is possible for a
new message to be added to the directory and for aerc to not show it
immediately (due to a slow connection) - using `:rmdir` at this moment
(with `-f` if the directory already contains messages) would delete the
directory and the new message that just arrived (and all other
contents). This is documented in aerc(1) so that users are aware of
possible risks.
This changes the scrolling to be done on the draw, when the height is
updated, ensuring that the selected item is kept on screen during
resizing.
Also, this ensures that messages will fill the screen when resizing the
window, for instance, shrinking and then growing drags down more
messages if possible.
This is a transplant of the dirlist scrolling logic.
