Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Extract the tcp connection details and timeout the tcp connect functions
(net.ResolveTCPAddr and net.DialTCP). If timed out, ensure that the
connection is properly closed.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add a debouncer to the idle mode. Avoid unnecessary idling when another
job arrives within a certain time frame.
For example, the ui sends three messages to the worker at the same time
when we open a message (FlagMessage, FetchMessageBodyPart, and the
FetchMessageHeaders). The debouncer prevents the unnecessary entering
and leaving of the idle mode between those messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Untangle the observer functionality from the message handling routine.
Observe the imap client's logout channel and trigger a connection error
when necessary to start the reconnect cycle.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Untangle the idle functionality from the message handling routine. Wait
for the idle mode to properly exit every time to ensure a consistent
imap state. Timeout when hanging in idle mode and inform the ui.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Extract the imap config and move the configure part out of the message
handler.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check slice bounds before using it for the message and expunge updates.
Log the error but ignore the affected updates.
Link: https://lists.sr.ht/~rjarry/aerc-devel/%3CCJEHBFFUI11T.1AYGOMVGZ87ZS%40rek2system%3E
Reported-by: ReK2 <rek2@hispagatos.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When running `:reply -q` on an unread message, aerc crashes after
opening the editor:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x18 pc=0x5d1019]
goroutine 63 [running]:
bufio.(*Reader).fill(0xc000086ef8)
/usr/lib/golang/src/bufio/bufio.go:106 +0xd9
bufio.(*Reader).Peek(0xc00020bef8, 0x1)
/usr/lib/golang/src/bufio/bufio.go:144 +0x5d
github.com/emersion/go-message/textproto.ReadHeader(0xc00004a700?)
emersion/go-message@v0.15.0/textproto/header.go:525 +0x5f
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessageBodyPart.func1(0xc00056e280)
worker/imap/fetch.go:99 +0x1ab
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages.func1()
worker/imap/fetch.go:178 +0xd7
created by git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages
worker/imap/fetch.go:172 +0x12b
This happens because the flags are updated in the callback that receives
the message itself. It causes the flag update to arrive in the same
channel/request. Ignore the messages that have an empty body (i.e. only
containing flag updates). This is inherently racy but there seems no way
to get rid of these extra messages.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Connor Kuehl <cipkuehl@gmail.com>
Since panics still regularly "destroy" the terminal, it is hard to get a
stack trace for panics you do not anticipate. This commit adds a panic
handler that automatically creates a logfile inside the current working
directory.
It has to be added to every goroutine that is started and will repair
the terminal on a panic.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit fixes all occurrences of the abovementioned lint-error in
the codebase.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Start the reconnect cycle when the initial connect fails. Make the
connection observer send a connection error when the imap client is nil.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
waits an increasing amount of time before attempting a reconnect.
Wait is capped at 16s. Prevents many reconnect attemps in a short time period.
Fixes commit 05ad96a30c ("imap: improve reconnect stability") that
improved the reliability of the reconnect mechanism but did not
implement controls to prevent the triggering of too many reconnects
within a short period of time.
Fixes: 05ad96a30c ("imap: improve reconnect stability")
Signed-off-by: Koni Marti <koni.marti@gmail.com>
improves the robustness of the imap reconnect feature which was
introduced in commit beae17a6da ("imap: auto-reconnects on connection
error").
If a connection error is emitted, the message list is cleared and a
corresponding error message is shown in the ui. Status bar is updated as
well. Upon reconnect, the directories and the message list will be
re-fetched (same behavior as the connect command).
Reconnect can be enabled and disabled with the connect and the
disconnect commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Some messages contain invalid headers, textproto.ReadHeader fails with
an error:
malformed MIME header key: From nobody Fri Jan 14 19
And all other messages of the selected folder are ignored.
Return an explicit error message to the UI and continue processing other
messages. This is consistent with what the maildir worker does.
Signed-off-by: Robin Jarry <robin@jarry.cc>
if the worker emits a connection error, the ui will automatically send back a
reconnect command. The worker then establishes a new connection. Auto-reconnect
is disabled when the user sends the disconnect command.
Fixes: https://todo.sr.ht/~rjarry/aerc/1
Signed-off-by: Koni Marti <koni.marti@gmail.com>
implements a new connection error message. This allows the worker to emit a
connection-related error message to the ui when the imap client closes the
loggedOut channel.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
fixes the panic when the user sends multiple connect commands and is
already connected. The panic is caused by closing an already closed
channel. This happens when the idle re-init code is not executed, e.g.
when there's a return statement in the switch block. A defer func()
before the switch block will prevent this. The existing behavior of only
creating a new idleStop channel when properly connected is preseverd.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
This reverts commit c605ada3dd.
This breaks reading message bodies. I am not sure why, I'll take some
time to fix it later.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Attempt to reconnect to the server when there is an unexpected
disconnection or network error.
Use the Client.LoggedOut() channel which is closed when the connection
is closed.
This patch is rather flaky and is certainly bugged. However, it is
a start.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Fix the following build error on mac os:
worker/imap/worker.go:368:29: undefined: syscall.TCP_KEEPCNT
worker/imap/worker.go:376:29: undefined: syscall.TCP_KEEPINTVL
These symbols are not defined on darwin.
Fixes: 5dfeff75f3 ("imap: add tcp connection options")
Signed-off-by: Robin Jarry <robin@jarry.cc>
In preparation for tcp keepalive options, we need access to the
net.TCPConn object associated with an IMAP connection. The only way to
do this is to create the connection ourselves.
No functional change.
Signed-off-by: Robin Jarry <robin@jarry.cc>
This will prepare for extra tcp connection options support and for
automatic reconnect. No functional change.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Display threads in the message list. For now, only supported by the
notmuch backend and on IMAP when the server supports the THREAD
extension.
Setting threading-enable=true is global and will cause the message list
to be empty with maildir:// accounts.
Co-authored-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Co-authored-by: Reto Brunner <reto@labrat.space>
Signed-off-by: Robin Jarry <robin@jarry.cc>
We made a new type out of go-message/mail.Address without any real reason.
This suddenly made it necessary to convert from one to the other without actually
having any benefit whatsoever.
This commit gets rid of the additional type
This allows us to hook into the std libs implementation of parsing related stuff.
For this, we need to get rid of the distinction between a mailbox and a host
to just a single "address" field.
However this is already the common case. All but one users immediately
concatenated the mbox/domain to a single address.
So this in effects makes it simpler for most cases and we simply do the
transformation in the special case.
The `:rmdir` command removes the current directory (`-f` is required if
the directory is not empty).
This is not supported on the notmuch backend.
An issue with the maildir backend is that some sync programs (e.g.
offlineimap) may recover the directory after it is deleted. They need
to specifically be configured to accept deletions, or special commands
need to be executed (e.g. `offlineimap --delete-folder`) to properly
delete folders.
A danger of using this on the IMAP backend is that it is possible for a
new message to be added to the directory and for aerc to not show it
immediately (due to a slow connection) - using `:rmdir` at this moment
(with `-f` if the directory already contains messages) would delete the
directory and the new message that just arrived (and all other
contents). This is documented in aerc(1) so that users are aware of
possible risks.
Provide search and filter with the option to specify more flag based
conditions.
Use '-x <flag>' to search for messages with a flag (seen, answered,
flagged) and '-X <flag>' to search for messages without a flag.
More mail flags can now be set, unset, and toggled, not just the
read/seen flag.
This functionality is implemented with a new `:flag` and `:unflag`
command, which are extensions to the matching `:read` and `:unread`
commands, adding support for different flags. In fact, the
`read`/`unread` commands are now recognized aliases to `flag`/`unflag`.
The new commands are also well documented in aerc(1).
The change mostly extends the previous read/unread setting functionality
by adding a selection for the flag to change.
- Add maildir flags to complement a messages imap flags
- Set the "seen" flag on sent messages when using the maildir backend
- Cleanup AppendMessage interface to use models.Flag for both IMAP and
maildir
Apparently sending an event for every incoming messageInfo slows down
the application significantly.
Therefore this slows down the emmision rate, on the cost of being out of date
in some cases.
The idle restart code is at the end of handleMessage in the worker.
However if an unsupported msg comes in, we returned early, skipping the re-init.
That lead to a crash due to double closing idleStop in the next iteration.
Me again,
this time fixing encoding of subjects and attachments. It was problem in
IMAP backend. While other backends user MessageInfo() function which
generates MessageInfo decoded via go-message methodes, IMAP worker is
creating MessageInfo directly, so all non-utf8 subjects and filenames
were in raw form.
This patch fixes it. Not sure if we should care about errors (if
DecodeHeader fails it returns raw string back).
>From what I see, this should solve all encoding problem (tested only
IMAP). So, now I can focus on features. ;-)
Have a great weekend!
Leszek
When deleting a message, sometimes FetchDirectoryContents will fire.
FetchDirectoryContents will return a smaller set of UIDs since messages
have been deleted. This operation races with fetching from the seqMap in
client.ExpungeUpdate. Only recreate the seqMap if it can grow so that
messages will continue to be expunged.
Signed-off-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Configure an oauthbearer source without a token_endpoint
parameter would panic due to nil pointer dereference
Example
source=imaps+oauthbearer://frode.aa%40gmail.com@imap.gmail.com:993
source-cred-cmd=pass oatuh2 frode.aa@gmail.com
token_endpoint is not required as it will use the provided
password as access_token when it is not set
