outgoing-cred-cmd is used to retrieve the password from a password
manager such as UNIX pass or bitwarden CLI. These tools often prompt for
a passphrase to secure the passwords and it is annoying having to enter
it every time sending an email with aerc.
Add a new option outgoing-cred-cmd-cache (default to true) to control
whether aerc will keep a cache of the password or run outgoing-cred-cmd
every time an email needs to be sent.
NB: If the cached password is incorrect, the only way to change it is to
restart aerc.
Fixes: ca90343850 ("outgoing-cred-cmd: delay execution until an email needs to be sent")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Adjust default values in config.go to follow what is set in the default
aerc.conf file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Make it possible to specify which account(s) to load. Preserve listed
order when creating account tabs.
aerc -a <account-name[,account-name]>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds a setting to the configuration to choose at which level the
folders in the dirtree are collapsed by default.
In my case, this is useful because my organisation has some rather deep
nesting in the folder structure, and a _lot_ of folders, and this way I
can keep my dirtree uncluttered while still having all folders there if
I need them.
Signed-off-by: Sijmen <me@sijman.nl>
Acked-by: Koni Marti <koni.marti@gmail.com>
Show contextual keybinds in a textbox when using the ':help keys'
command. This command is bound to '?' by default.
Fixes: https://todo.sr.ht/~rjarry/aerc/42
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since the minimum required version of Go has been bumped to 1.16, the
deprecation of io/ioutil can now be acted upon. This Commit removes the
remaining dependencies on ioutil and replaces them with their io or os
counterparts.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Sometimes, a <tab> or <enter> key in a binding will be formatted as
a <c-i> or <c-m> respectively. This is because these keys are
equivalent. Prefer their canonical name instead of the control modifier
variant.
Fixes: 5e600d7ab4 ("binds: fix ctrl-i and ctrl-m key definitions")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Koni Marti <koni.marti@gmail.com>
Error wrapping as introduced in Go 1.13 adds some additional logic to
use for comparing errors and adding information to it.
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply GoDoc comment policy (comments for humans should have a space
after the //; machine-readable comments shouldn't)
Use strings.ReplaceAll instead of strings.Replace when appropriate
Remove if/else chains by replacing them with switches
Use short assignment/increment notation
Replace single case switches with if statements
Combine else and if when appropriate
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Document filter input charset
Add w3m filter example to default config
Adapt html and html-unsafe filters
Fixes: https://todo.sr.ht/~rjarry/aerc/65
Signed-off-by: q3cpma <q3cpma@posteo.net>
Acked-by: Robin Jarry <robin@jarry.cc>
This can be useful in cases when:
1. outgoing-cred-cmd requires a user action or confirmation (e.g. when
using pass with a Yubikey or similar smart card that requires a user
to enter a pin or touch the device when decrypting the password)
2. A user starts aerc frequently, but not all the sessions end up with
sending emails
3. So the user only wants to execute outgoing-cred-cmd when the password
is really used, so the user doesn't have to enter pin or touch their
Yubikey each time aerc starts
Signed-off-by: Stas Rudakou <stas@garage22.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Debounce client-side thread building in the message store. Debouncing is
useful when multiple messages are loaded, i.e. when scrolling with
PgUp/PgDown.
Without the debouncing, all client-side threads will be built everytime
the message store is updated which creates a noticable lag in the
message list ui when client-side threading is activated.
The default debouncing delay can be changed by changing
'client-threads-delay' in the UI config section.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
These were reported by lintian when packaging aerc 0.11.0. There are
probably others.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
On all terminals, ctrl-i sends a tab character (0x09). For some reason,
tcell.ModCtrl+tcell.KeyCtrlI is interpreted as ctrl-tab.
Similarly, ctrl-m sends a new line (0x0a) and
tcell.ModCtrl+tcell.KeyCtrlM is interpreted as ctrl-enter.
Remove control modifier for these two key definitions only. All others
do not work without them.
Fixes: 7a6c808c04 ("bindings: prepare for more modifers")
Fixes: https://todo.sr.ht/~rjarry/aerc/56
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
When using multiple accounts, the contacts may be different. Allow using
specific address book commands per account.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
GetUiConfig was being called many times, and came up as a high CPU user
in a cpuprofile. Every call would merge a UIConfig, which is a costly
operation. Ideally, we would only need to have a config for every
account X every directory. We also have a context for subjects. This
patch stores all FOLDER and ACCOUNT level configs and reuses those
merged objects. The SUBJECT contexts are not stored in favor of merging
on-the-go, with a TODO comment to deprecate that feature and implement a
better per-message styling option. I suspect this feature is not used
very much.
Before applying this patch with my setup, GetUiConfig is called 1159
times just to open aerc. After applying, this is reduced to 37.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch changes references to uiConfig in function signatures and
structs to be pointers.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The default config had completion-{delay,popover} in the [viewer]
section, but they belong in the [ui] section
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
When using section.MapTo(struct) (go-ini), if the struct has a default
value for a time.Duration type, a zero-value in the config will not
overwrite the default. If the type is *time.Duration, it will be
overwritten properly. One consideration was to change all
time.Duration types to *time.Duration. This method was chosen for ease
of implementation.
For example, if you set dirlist-delay = 0s, the delay will be 200ms.
This can be observed by logging the value just after mapping the ui
section in config.go. A config value of 0.1ms will have a delay of
0.1ms.
Currently, aerc has 4 time.Duration config values:
1. DirlistDelay - default 200 ms
2. CompletionDelay - default 250 ms
3. CheckMail - default unset (0)
4. CheckMailTimeout - default 10 s
1, 2, and 4 have a non-zero default value and are subject to this bug.
Only 1 and 2 are fixed in this patch. Number 4 would not make sense to
have a 0 second timeout, therefore we can prevent the user from doing
this by keeping it as it is.
Another option could be to set these to 0 in config.go. The default
config (aerc.conf) has these keys in it with their default values.
Presumably, we don't need to set them again in config.go. If a user
deletes the config values out of aerc.conf, the UI will function but
with 0s delays.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Add a default keybind to open messages in the default Postpone folder
("Drafts") in edit-mode.
A frequent question on IRC is "how do I edit a draft?". When a user
selects a Draft and presses <Enter>, the intent is usually to edit that
draft. This commit makes this the default behaviour for the default
Postpone folder.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add option to specify folder-specific binds for message lists. The binds
are layered: any existing binds in [messages] are overwritten by a more
specific bind in say, [messages:folder=Drafts]. The order is currently:
[messages] < [messages:account=<account>] < [messages:folder=<folder>]
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit refactors the internal PGP implementation to make way for
GPG integration.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds two style options: dirlist_unread and dirlist_recent. These options
apply in layers, in the same way as msglist_* styles do.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This adds the option "unsafe-accounts-conf" under the section [general]
of aerc.conf. This allows an user to specify if the accounts.conf file
must be restrict to be read by the file owner (0600).
By default it is set to "false".
Signed-off-by: Victor Freire <victor@freire.dev.br>
Acked-by: Robin Jarry <robin@jarry.cc>
The left and right square brackets are inverted. Fix that.
Signed-off-by: Ivan Oleynikov <ivan.oleynikov95@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This is only supported with notmuch and specific imap servers.
Signed-off-by: Kenneth Flak <kennethflak@protonmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Allow to bind to < and > by using \< and \> in binds.conf. Ensure that
the single \ can still be properly used to bind to other commands.
For example, the following binds would work now:
\< = :prev-tab<Enter>
\> = :next-tab<Enter>
\ = :filter<space>
Fixes: https://todo.sr.ht/~rjarry/aerc/37
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Sebastian LaVine <mail@smlavine.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Also move binding for :delete such that the :open, :save, :pipe command
bindings are grouped together.
Signed-off-by: kt programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
os.Stat might return other errors aside from one stating that the file
does not exist. If it does, propagate the error down. As before, if the
file does not exist, just do nothing.
Signed-off-by: Connor Kuehl <cipkuehl@gmail.com>
Reviewed-by: Moritz Poldrack <moritz@poldrack.dev>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Make it possible to specify the color in the style sets by number in
addition to the color name. This allows using colors defined by the
terminal.
Signed-off-by: Tobias Wölfel <tobias.woelfel@mailbox.org>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit fixes all occurrences of the abovementioned lint-error in
the codebase.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
When trying to search in less, keys bound to viewer functions can't be
used as part of the search query, which makes the search useless.
Add a view::passthrough binding mode and a :toggle-key-passthrough
command go toggle in and out of that mode. By default, typing '/' in the
viewer is bound to enabling key passthrough and automatically inserting
'/', to easily enter "less" search mode. When in the passthrough mode,
all bindings are ignored by default. The default binds.conf only defines
a single keybinding in that mode: <Esc> to get back out. $ex is bound to
<C-x> to allow typing colons.
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
