Display entire message envelope in a user-friendly dialog popup with the
:envelope command. All header fields can be displayed with the -h flag.
Fixes: https://todo.sr.ht/~rjarry/aerc/85
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The Message-Id header cannot be relied upon as users can tweak it before
sending. The subject seems a more reliable basis to reorder patches.
Change the logic of sorting. Previously, all messages were required to
look like patches to be sorted. Now if at least one message looks like
a patch, all messages will be sorted by Subject before piping them.
Since `git am` ignores non-patch messages, it should allow piping series
of emails including reviews and comments without getting confusing
errors.
I have tested that this works on multiple series that appeared out of
order in my INBOX with the following command (after marking the
messages):
:pipe -m sed -n 's/^Subject: //p'
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
The split command allows delta size changes, which triggers a condition
where the split can overflow into the dirlist. Clamp the minimum size of
a split or vsplit to "1" to prevent the view from overflowing, or
completely covering the message list. A split of 0 will still clear the
split.
Reported-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Prevent panic when split is called but the msgstore is either not
initialized or has no UIDs. This condition could be triggered by calling
:split or :vsplit immediately at startup.
Use the same logic as the :view command, which could operate in a
similar manner.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix message view behavior for unfetched headers. When scrolling "over"
the message list boundary, current behavior is to close the message
viewer tab. Now, the headers will be fetched so that we can scroll
through the messages uninterrupted.
Fixes: https://todo.sr.ht/~rjarry/aerc/90
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The [v]split command panics when it is run with no message selected, or
when messages aren't loaded. Check for a valid selected message before
creating a split, and report an error if one isn't selected.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The helpClose function is used to call UpdateScreen on MessageViewer,
which has the effect of invalidating and redrawing the message view.
This logic is redundant with the addition of tcell-term and the main
event loop.
Remove the helpClose calls. Remove the UpdateScreen methods from
messageviewer: those functions are only used by the helpClose function.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Add :split and :vsplit commands, which split the message list view to
include a message viewer. Each command takes an int, or a delta value
("+1", "-1"). The int value is the resulting size of the message list,
and a new message viewer will be displayed below / to the right of the
message list. This viewer *does not* set seen flags.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Prevent the embarrassing forgotten attachment scenario by warning the
user before sending a message that may need an attachment but does not
have one. Whether a message needs an attachment is determined by testing
a configurable regex against the message body.
Signed-off-by: Jason Cox <dev@jasoncarloscox.com>
Acked-by: Robin Jarry <robin@jarry.cc>
In order to make things easier for newcomers from notmuch, add a tag command
which is just an alias for modify-labels.
Signed-off-by: inwit <inwit@sindominio.net>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
These two commands have virtually zero in common. Move open-link in its
own file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Inwit <inwit@sindominio.net>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Remove invalidatable type and all associated calls. All items can
directly invalidate the UI.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix charset to UTF-8 in part attachments. The forward and recall
commands fetch message parts with the go-message package which decodes
to UTF-8. Hence, we should set the charset of the part attachment to
utf-8 and not just copying over the one from the original message.
Reported-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add a peek flag -p to the view commands to open the message viewer
without setting the "seen" flag. If the flag is set, it would ignore the
"auto-mark-read" config.
The SetSeen flag will be propagated in case the message viewer moves on
to other messages, i.e. with the delete or archive commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add option to open a message in the message viewer without setting the
seen flag. Enables the message viewer to be used as a preview pane
without changing the message flags unintentionally. Before, the message
viewer would set the seen flag by default. The IMAP backend will now
always fetch the message body with the peek option enabled (same as we
fetch the headers).
An "auto-mark-read" option is added to the ui config which is set to
true by default. If set the false, the seen flag is not set by the
message viewer.
Co-authored-by: "James Cook" <falsifian@falsifian.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Subsitute the format specifier %w for %v in the logging facility. The
logging functions use a fmt.Sprintf call behind the scene which does not
recognize %w. %w should be used in fmt.Errorf when you want to wrap
errors. Hence, the log entries that use %w are improperly formatted like
this:
ERROR 2022/10/02 09:13:57.724529 worker.go:439: could not get message
info %!w(*fmt.wrapError=&{could not get structure: [snip] })
^
Links: https://go.dev/blog/go1.13-errors
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add XOAUTH2 authentication support for IMAP and SMTP. Although XOAUTH2
is now deprecated in favor of OAuthBearer, it is the only way to connect
to Office365 since Basic Auth is now completely removed.
Since XOAUTH2 is very similar to OAuthBearer and uses the same
configuration parameters, this is basically a copy-paste of the existing
OAuthBearer code.
However, XOAUTH2 support was removed from go-sasl library, so this
change reimports the code that was removed from go-sasl and offers it
a new home in lib/xoauth2.go. Hopefully it shouldn't be too hard to
maintain, being less than 50 SLOC.
Link: https://github.com/emersion/go-sasl/commit/7bfe0ed36a21
Implements: https://todo.sr.ht/~rjarry/aerc/78
Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com>
Tested-by: Inwit <inwit@sindominio.net>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Instead of xdg-open (or open on MacOS), allow forcing a program to open
a message part. The program is determined in that order of priority:
1) If :open has arguments, they will be used as command to open the
attachment. If the arguments contain the {} placeholder, the
temporary file will be substituted, otherwise the file path is added
at the end of the arguments.
2) If a command is specified in the [openers] section of aerc.conf for
the part MIME type, then it is used with the same rules of {}
substitution.
3) Finally, fallback to xdg-open/open with the file path as argument.
Update the docs and default config accordingly with examples.
Fixes: https://todo.sr.ht/~rjarry/aerc/64
Co-authored-by: Jason Stewart <support@eggplantsd.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
There is no need for convoluted channels and other async fanciness.
Expose a single XDGOpen static function that runs a command and returns
an error if any.
Caller is responsible of running this in an async goroutine if needed.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
The read command calls store.Flag in a separate goroutine unnecessarily.
Calling this method on store should be very fast, as it only sends a
message to the backend worker and does not wait on IO.
Call the store.Flag method from the main thread. Remove wrapper function
and call store.Flag directly for cleaner code.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Call SelectedMessage() in the mark command only when the uid of the
currently selected message is actually needed. If no message is
selected, i.e. after some filter operations where the previously
selected message is not in the results, 'mark -a' would fail since no
message is selected and an error is returned from SelectedMessage() even
though this is not necessary to mark or unmark all messages.
Reported-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Update status line when switching accounts in the composer.
Fixes: 371c1a ("commands: add switch-account command for composer")
Reported-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Allow switching to next or previous account with switch-account -n and
switch-account -p, respectively. By default, these are bound to Alt-n
and Alt-p.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Koni Marti <koni.marti@gmail.com>
Switch accounts when in the composer mode. When switching accounts, the
From header, the crypto status and the address completer will be
updated.
Accounts can be switched with :switch-account <account-name>. The
completions for the switch-account command will list the available
accounts. If switch-account is run without arguments, the current
account name with the correct usage is displayed.
Fixes: https://todo.sr.ht/~rjarry/aerc/72
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Allow showing the current working directory in the statusline via
[statusline] render-format=%p, which is useful if the user changes
directories often.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Losing your progress in case of a crash, or when accidentally closing
aerc is annoying and costs time. This can be drastically reduced by
keeping a persistent history.
Write commands to XDG_CACHE_DIR/aerc/histfile when they are run and load
them when needed. If another instance of aerc is already writing the
file, fall back to the current model, where the history is kept in
memory.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
zoxide is a command line utility, supported by many CLI programs. Enable
zoxide support via the :z command which is a drop-in replacement for :cd
(and calls ChangeDirectory in the background), but also manages adding
paths to and querying from the zoxide database. The command is not
registered if zoxide is not on $PATH.
Link: https://github.com/ajeetdsouza/zoxide
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When quoting an encrypted message for reply, the quoted text is shown as
"Version: 1.0". This is due to this being the first non-multipart text
portion of the message, which is what the quoted reply logic looks for.
Properly quote replies to encrypted messages by decrypting the message,
and quoting the content. The message must be open in a message view in
order to quote it (it must be decrypted, which is handled by the message
viewer).
Suggested-by: Moritz Poldrack <moritz@poldrack.dev>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Jens Grassel <jens@wegtam.com>
Enable path globbing using Go's standard library globbing capabilities,
which allows for attaching multiple files at once.
Suggested-by: Anderson John Njahi <johnjahi55@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Reuse the next-message-on-delete configuration flag to mirror the
behavior of delete when archiving.
Signed-off-by: Ben Cohen <ben@bencohen.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Fixes the find-next-loop when deleting the last message. The reverse
loop with store.Prev() will break too early because the value of
'previous' was not reset correctly.
Fixes: d941960f "delete: improve find next function"
References: https://todo.sr.ht/~rjarry/aerc/59
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Mark or unmark the shown message threads. Threads must be available in the
message store. Use the -T option for the mark or unmark commands. Can be
used in combination with the toggle flag (-t).
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When entering visual selection mode, the current selection is deleted.
This patch extends the visual mode behavior to select multiple blocks of
messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix large archive operations that covers messages in the store with
unfetched headers. Commit e5ad877af5 ("msgstore: fetch missing headers
in visual mode") fixed this for the visual selection mode but omitted
the case when 'mark -a' is used to mark all messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Separate the marking functions from the message store and extract the
marking behavior into its own class with tests.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Show contextual keybinds in a textbox when using the ':help keys'
command. This command is bound to '?' by default.
Fixes: https://todo.sr.ht/~rjarry/aerc/42
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since the minimum required version of Go has been bumped to 1.16, the
deprecation of io/ioutil can now be acted upon. This Commit removes the
remaining dependencies on ioutil and replaces them with their io or os
counterparts.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Delete operations are not supported by the notmuch backend. Revert
deleted messages when the operation is not supported, and reselect the
original selection.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Error wrapping as introduced in Go 1.13 adds some additional logic to
use for comparing errors and adding information to it.
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply GoDoc comment policy (comments for humans should have a space
after the //; machine-readable comments shouldn't)
Use strings.ReplaceAll instead of strings.Replace when appropriate
Remove if/else chains by replacing them with switches
Use short assignment/increment notation
Replace single case switches with if statements
Combine else and if when appropriate
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Replaces infinite for loops containing a select on a channel with a
single case with a range over the channel.
Removes redundant assignments to blank identifiers.
Remove unnecessary guard clause around delete().
Remove `if condition { return true } return false` with return condition
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Archive, delete, and move all remove messages from the message store.
The commands themselves invalidated the message list. The message list
was also invalidated for every MessagesDeleted message received. Remove
the call in the command logic to reduce redraws of the message list
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
