Commit Graph

80 Commits

Author SHA1 Message Date
Reto Brunner f06d683688 Remove duration from the status methods
We always set 10 seconds anyhow, might as well do that without repeating ourselfs.
2020-05-27 08:11:40 +02:00
Reto Brunner 0f78f06610 Add Style configuration
The following functionalities are added to configure aerc ui styles.
- Read stylesets from file with very basic fnmatch wildcard matching
- Add default styleset
- Support different stylesets as part of UiConfig allowing contextual
  styles.
- Move widgets/ui elements to use the stylesets.
- Add configuration manual for the styleset
2020-05-27 07:57:10 +02:00
Ray Ganardi a31d184ba5 aerc: Refactor getpasswd dialog
Previously there's a hack for showing and hiding the dialog.

Change it to use channels to emulate async/await
2020-05-25 09:30:20 -04:00
Ray Ganardi 94e8d8f7bf feat(pgp): Show error message from pgp
The error wasn't shown, making errors like wrong password being ignored
and the password is prompted again.
2020-05-25 09:30:20 -04:00
Ray Ganardi c32ab765a7 feat(pgp): Add <ESC> to cancel password prompt
Previously there was no way to cancel the password prompt.
2020-05-25 09:30:20 -04:00
Drew DeVault 6f8ad91824 gofmt fixes 2020-04-24 12:59:40 -04:00
Jeffas 7f033278eb Add postpone command
This command uses the Postpone folder from the account config to save
messages to. Messages are saved as though they were sent so have a valid
'to' recipient address and should be able to be read back in for later
editing.
2020-04-24 12:59:21 -04:00
Ray Ganardi 447e662057 Add :choose command
Usage:
	*choose* -o <key> <text> <command> [-o <key> <text> <command>]...

Prompts the user to choose from various options.
2020-04-24 12:59:21 -04:00
Ben Fiedler 7c89143c70 Use aerc.PushError where appropriate
Forgot an unused import, to save you the hassle here is v2.
2020-04-23 21:02:45 +02:00
Jeffas 3156d481fe Add pinned tabs
This adds the commands pin-tab and unpin-tab. Once pinned a tab lives on
the left of the tabstrip and has a configurable marker, defaulting to `
before its name.
2020-03-09 09:31:02 -04:00
Drew DeVault 15028df1f9 Reduce size of the password prompt UI 2020-03-03 21:51:27 -05:00
Drew DeVault f3158b36f1 Initial support for PGP decryption & signatures 2020-03-03 16:49:52 -05:00
Jeffas 68f179021d Add move-tab command 2020-03-03 20:08:29 +01:00
Leszek Cimała bf28e23933 create OriginalMail struct 2020-01-09 14:31:19 -05:00
Ben Burwell 7160f98a90 Show textinput completions in popovers
Rather than showing completions inline in the text input, show them in a
popover which can be scrolled by repeatedly pressing the tab key. The
selected completion can be executed by pressing enter.
2019-12-21 09:23:21 -05:00
Greg Anders 4bdef7d860 Add UI options to save/pipe messages with unsupported mimetypes
Adds a message indicating the user's ability to :save or :pipe a message
with an unsupported mimetype and also adds a selector widget (similar to
the tutorial).

The selector widget was previously defined in the account wizard module,
so this commit breaks it out into its own module to allow for re-use.

Further, modify the BeginExLine() function to take an argument that
pre-populates the command line, allowing functions to initiate an ex
command without executing it.

Closes #95.
2019-11-17 13:19:13 -05:00
Srivathsan Murali 3ba69edab5 Add Templates with Parsing
+ Changes NewComposer to return error.
+ Add lib to handle templates using "text/template".
+ Add -T option to following commands
    - compose.
    - reply
    - forward
+ Quoted replies using templates.
+ Forwards as body using templates
+ Default templates are installed similar to filters.
+ Templates Config in aerc.conf.
    - Required templates are parsed while loading config.
+ Add aerc-templates.7 manual for using template data.
2019-11-10 10:15:49 -05:00
Jeffas 00b9ca5032 Fix selected account to return for messageviewer
This ensures that the selectedaccount is returned if currently selected
tab is a messageviewer. This also makes it more extensible for adding
other ways of getting the selected account.
2019-10-02 15:40:23 -04:00
Wagner Riffel ecc26b53c9 widgets: remove duplicate import
Signed-off-by: Wagner Riffel <wgrriffel@gmail.com>
2019-09-12 23:42:08 -04:00
Jeffas e2d5c456dc Add signatures
This adds the ability for per-account signatures in the accounts.conf
config file. The signature is added to emails in the editor at the
bottom of the email. This includes when forwarding, replying to, and
composing emails.

There are two config options: signature-file and signature-cmd. The
former allows a signature to be read from a file and the latter allows
an arbitrary command to be executed to return the signature.

The config options have been documented in aerc-config
2019-09-12 16:18:34 -04:00
Jeffas f6216bb621 Add Mouseable
This adds the Mouseable interface. When this is implemented for a
component that item can accept and process mouseevents.

At the top level when a mouse event is received it is passed to the
grid's handler and then it trickles down until it reaches a component
that can actually handle it, such as the tablist, dirlist or msglist.

A mouse event is passed so that components can handle other things such
as scrolling with the mousewheel. The components themselves then perform
the necessary actions.

Clicking emails in the messagelist opens them in a new tab.

Textinputs can be clicked to position the cursor inside them.

Mouseevents are not forwarded to the terminal at the moment.

Elements which do not handle mouse events are not required to implement
the Mouseable interface.
2019-09-11 11:41:34 -04:00
Wagner Riffel 6838c23478 all: purge redundant underscores
Signed-off-by: Wagner Riffel <wgrriffel@gmail.com>
2019-09-04 16:30:57 -10:00
Christopher Vittal ecd803aae4 Add :prompt command
Usage:
    :prompt <prompt> <command...>

Displays the prompt on the status bar, waits for user input, then
appends that input as the last argument to the command and executes it.
The input is passed as one argument to the command, unless it is empty,
in which case no extra argument is added.
2019-08-26 09:48:39 +09:00
Drew DeVault 4fc6fee734 Revert "add close command at global level"
This reverts commit f0a0c5aa73.
2019-08-13 10:55:50 +09:00
Aditya Srivastava f0a0c5aa73 add close command at global level 2019-08-13 10:49:34 +09:00
Reto Brunner 072b5f453c Close backends prior to shutdown
We need some way to signal the backends that we are about to shutdown,
allowing them to clean up (for example in notmuch committing the db changes).
This commit implements a hook which gets called upon shutdown, providing
backends implement the io.Closer interface.
2019-08-08 10:24:03 +09:00
Ben Burwell 152f8c9519 Ring bell when new messages arrive
Add a "new-message-bell" option to the UI section of aerc.conf. A new
hook into the message store allows the msglist widget to detect new
messages being added to the displayed list. When new messages are
delivered, and the new-message-bell option is enabled (as it is by
default), the terminal will beep.
2019-07-29 15:01:49 -04:00
Jeffas 989730d470 Add index option to change-tab
This allows selection of a tab using its index. It attempts to parse the
given argument as a number, if it fails then it uses it as a name.

Also supports relative indexes using prefixed + or -.
2019-07-27 12:40:28 -04:00
Galen Abell 8635c70fda Add command history and cycling
Aerc will keep track of the previous 1000 commands, which the user can
cycle through using the arrow keys while in the ex-line. Pressing up
will move backwards in history while pressing down will move forward.
2019-07-26 14:29:34 -04:00
Daniel Bridges 67fb0938a6 Support configurable header layout in compose widget 2019-07-26 14:22:04 -04:00
Jeffas dc4c36adbf Add new-email trigger
This patch sets up the trigger config section of aerc.conf.

Each trigger has its own function which is called from the place where
it is triggered. Currently only the new-email trigger is implemented.

The triggers make use of format strings. For instance, in the new-email
trigger this allows the user to select the trigger command and also the
information extracted from the command and placed into their command.

To actually execute the trigger commands the keypresses are simulated.

Further triggers can be implemented in the future.

Formatting of the command is moved to a new package.
2019-07-26 14:00:24 -04:00
Jeffas e42b95a617 Add change tab command
This command allows the user to change tab by giving the tab name. This
can be tab completed too. The previous tab is stored in the tabs module
so that when a new tab is created it is still possible to go to the
previous one.

Normal invocation is :ct folder
Previous tab is :ct -
2019-07-23 10:27:59 -04:00
Drew DeVault 7a489cb001 Add Unix socket for communicating with aerc 2019-07-19 14:15:48 -04:00
Jeffas d7975132b6 Show currently pressed keys in statusline
This patch adds the currently pressed keys to the statusline. This is
useful when keybindings are multiple keys long and you might forget
which keys are already pressed.
2019-07-17 17:12:52 -04:00
Jeffas 3b09c07e7a Add clickable tabs
This introduces a new interface `Clickable`. I'd imagine this would be
implemented for most widgets eventually and would allow for programs run
in the terminal to also have their mouse events forwarded to them.

For the tabs it was relatively simple to check that the position of the
click is within the boxes for the tabs. For other components I'd imagine
that some state representing their currently drawn bounding box would be
useful.
2019-07-11 19:45:53 -04:00
Gregory Mullen 2a0961701c Implement basic tab completion support
Tab completion currently only works on commands. Contextual completion
will be added in the future.
2019-06-29 14:24:19 -04:00
Drew DeVault ceeb30abeb Fix Cc & Bcc handling in replies 2019-06-21 14:33:09 -04:00
Kevin Kuehler a54f4adb8f lib/ui/tab: Add Replace method
Also expose a light wrapper method in aerc.go for tab replacement

Signed-off-by: Kevin Kuehler <kkuehler@brave.com>
2019-06-11 09:34:45 -04:00
Galen Abell 28fc9fa53d Add :save and :pipe commands to viewer
* :save takes a path and saves the current message part to that location
* :pipe is the same as pipe on the account page, but uses the current
  message part rather than the whole email (ie :pipe gzip -d)
* Refactored account:pipe and extracted common pipe code to
  commands.util.QuickTerm
* Added helper command aerc.PushError
2019-05-27 09:37:07 -04:00
Drew DeVault 9b19e3ad05 Show account wizard if no accounts configured 2019-05-22 11:35:55 -04:00
Drew DeVault a7341aff21 Fix always showing last account tab 2019-05-22 10:39:52 -04:00
Drew DeVault 6811143925 New account wizard, part one 2019-05-21 16:53:50 -04:00
Simon Ser a15ea01cfb Update internal state and draw from the same goroutine
This commit introduces a new Aerc.Tick function that should be called to
refresh the internal state. This in turn makes each AccountView process worker
events.

The UI goroutine repeatedly refreshes the internal state before drawing a new
frame. The reason for this is that many worker messages may need to be
processed for a single frame, and drawing the UI is far slower than refreshing
the internal state. This has been confirmed in my testing (calling Aerc.Tick
only once per frame results in a slower display).

Many synchronization code has been removed. We can now write widgets without
having to care so much about races. The remaining sync users are:

- widgets/spinner: the spinner value is updated from inside an internal
  goroutine
- lib/ui/invalidatable: Invalidate may be called from any goroutine
- lib/ui/grid: same
- lib/ui/ui: an internal goroutine needs read access to UI.exit
- worker/types/worker: Worker.callbacks is used for both worker and UI
  callbacks

The exact goroutine requirements for Drawable have been documented.
2019-05-19 11:51:16 -04:00
Drew DeVault 98da4c9509 s/aerc2/aerc/g 2019-05-17 20:57:10 -04:00
Drew DeVault f77d7c2c3d Add distinct keybindings for each compose view 2019-05-14 14:27:28 -04:00
Drew DeVault 577248f5e1 Add initial compose widget 2019-05-12 00:06:09 -04:00
Drew DeVault 27b25174e2 Make the message viewer real, part one 2019-03-31 12:14:37 -04:00
Drew DeVault 5d0402aeea Add message view commands, :close 2019-03-30 21:45:41 -04:00
Drew DeVault fa04a1e036 Add basic message viewer mockup 2019-03-30 14:12:04 -04:00
Drew DeVault 2958579ee7 Correct color of error messages 2019-03-30 13:05:00 -04:00