The grid used static sizes which meant that changing settings didn't
have an effect on elements of the ui, notably the sidebar width. This
patch makes the `Size` parameter of a cell a function which returns the
`int`, allowing for dynamic sizes.
A `Const` function is also included for ease of use for static sizes.
The following functionalities are added to configure aerc ui styles.
- Read stylesets from file with very basic fnmatch wildcard matching
- Add default styleset
- Support different stylesets as part of UiConfig allowing contextual
styles.
- Move widgets/ui elements to use the stylesets.
- Add configuration manual for the styleset
Especially if one tries to interact with all marked messages there could be
the case that not all headers are fetched yet, hence the messageInfo is still nil.
This segfaults a lot of commands which in principle only need the uid to complete.
If we switch to uids, this issue can be alleviated for those commands.
Soves an issue with go1.15 not letting ctty be a parent. See
https://github.com/creack/pty/pull/97 for more details.
Signed-off-by: Guillaume J. Charmes <git+guillaume@charmes.net>
This command uses the Postpone folder from the account config to save
messages to. Messages are saved as though they were sent so have a valid
'to' recipient address and should be able to be read back in for later
editing.
Due to headers being essentially free text, we constantly run into issues
with parts of the body being interpreted as headers.
Remove the ability to overwrite headers to avoid that, while keeping the ability
to specify headers in the template files.
Fixes#383
This adds the commands pin-tab and unpin-tab. Once pinned a tab lives on
the left of the tabstrip and has a configurable marker, defaulting to `
before its name.
This changes the ui to show the spinner while we are sorting. It only
shows one line of the spinner since there are an unknown number of
messages at this time.
Updates to a store can be asynchronous so we shouldn't select it just
because it had an update. Selection of the stores should be driven by
explicit user commands.
This fixes an issue with the updated count logic, where only fetched messages
where counted to the exists string of the rue count.
Note that the count is still broken (we only count read / unread messages we
fetched, but that is the same behaviour as prior to the commit
66b68f35b3)
This reverts commit bd4df53009.
I did not properly untangle the opening / dirlist update of each other.
This interferes with the imap worker, hence the revert
Currently the dirlist ignores the counts provided by the dirInfo.
However some of the workers can actually provide accurate counts much quicker
than if we count the flags.
Eventually we will also want to enable displaying counts for background folders,
where the brute force counting won't work as none of the headers are fetched yet.
This commit models it in an opt-in manner, if the flag isn't set then we still
count the messages manually.
Previously, sending a DirectoryInfo assumed that a directory change
happened. However we don't want that if we only want to update the
unread message count.
The docs of strings.Compare state:
> Compare is included only for symmetry with package bytes. It is usually
> clearer and always faster to use the built-in string comparison operators
> ==, <, >, and so on.
So let's do that.
The go compiler can't help much with untyped int constants.
Even though the only valid constants are 0-3 it will happily accept 4 as input.
Let's let the go compiler worry about correctness here. This also allows people
not very familiar with the code to use it properly via auto completion.
+ Adds parsing of contextual ui sections to aerc config.
+ Add GetUiConfig method for AercConfig that is used to get the
specialized UI config.
+ Add UiConfig method to AccountView to get specialized UI Config.
+ Modifies Aerc codebase to use specialized UIConfig instead.
+ Adds documentation for Contextual UI Configuration
Previously the workers returned a mixture of decoded / encoded parts.
This lead to a whole bunch of issues.
This commit changes the msgviewer and the commands to assume parts to already
be decoded
In order to accommodate for that, the headerlayout needed to be rewritten
to pass the filter criteria back to the msgviewer, instead of just using
the normal headers.
Note that, until we get color configuration, this means that the user *must*
have the %Z verb in the index format else it'll be horribly confusing
as no visual indication is provided
Rather than showing completions inline in the text input, show them in a
popover which can be scrolled by repeatedly pressing the tab key. The
selected completion can be executed by pressing enter.
A new config options for accounts.conf (folders-sort) was added to
allow a user to choose which folders should be shown on top.
My use case was to avoid stepping into heavy, but rarely viewed folders
when cycling through other often accessed ones.
To test add this to your account.conf:
folders-sort = INBOX,Sent,Archive
INBOX, Sent and Archive should then show at the top of your dirlist,
and all other folders should come next in alphabetical order.
Very important fix. Remove garbage from reply message headers. Till
now all Original fields were send in reply, which we do not want and could
lead to uncorrect email message.
Hi!
This patch will fix missing filename if it is RFC2231 encoded with charset
different then ASCII or UTF8. Example how it looks like in mail:
Content-Type: application/pdf;
name="=?UTF-8?Q?Opis_przedmiotu_zam=c3=b3wienia_-_za=c5=82=c4=85cznik_nr_1?=
=?UTF-8?Q?=2epdf?="
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
filename*0*=iso-8859-2''%4F%70%69%73%20%70%72%7A%65%64%6D%69%6F%74%75%20;
filename*1*=%7A%61%6D%F3%77%69%65%6E%69%61%20%2D%20%7A%61%B3%B1%63%7A%6E;
filename*2*=%69%6B%20%6E%72%20%31%2E%70%64%66
Yes, this should be forbidden :-). Anyway, best solotion in such cases
is to failback to Content-Type name. I am not sure if it is guaranted to
be there, but probably it will.
Leszek
This patch should fix encoding problem with non-utf8 text/plain mime.
It is now correctly convert to utf8 before sending to pager. It will
also solve quoting such mails.
Leszek
This patch parses the processed template for headers and populates
matching header editors.
Those are then stripped from the template body before prepending the template
and remaining header fields to the composer content.
The main motivation for this is keeping receiver, sender and subject
lines in the template file and generating the message subject from the
date.
Parse the processed template for headers and populates matching header
editors accordingly.
Those are then stripped from the template body before prepending it
and remaining header fields to the composer content.
The motivation for this is keeping receiver, sender and subject
lines in the template file and generating the message subject with the
date functions.
The editor and pager were not properly being reaped, causing resource
leakage whenever a user replies to a message.
Signed-off-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Adds a message indicating the user's ability to :save or :pipe a message
with an unsupported mimetype and also adds a selector widget (similar to
the tutorial).
The selector widget was previously defined in the account wizard module,
so this commit breaks it out into its own module to allow for re-use.
Further, modify the BeginExLine() function to take an argument that
pre-populates the command line, allowing functions to initiate an ex
command without executing it.
Closes#95.
When viewing a message part with no available filter, clicking the UI
would cause a nil pointer dereference because the MouseEvent was passed
to the PartViewer's `term` field, which does not exist in the case of an
absent filter.
+ Changes NewComposer to return error.
+ Add lib to handle templates using "text/template".
+ Add -T option to following commands
- compose.
- reply
- forward
+ Quoted replies using templates.
+ Forwards as body using templates
+ Default templates are installed similar to filters.
+ Templates Config in aerc.conf.
- Required templates are parsed while loading config.
+ Add aerc-templates.7 manual for using template data.
The filter command shells out and returns almost immediately. Call
Wait() so the filter process gets reaped. Prior to this patch, aerc
creates a zombie process for every email that is viewed.
Signed-off-by: Kevin Kuehler <keur@xcf.berkeley.edu>
A pager is spawned every time an email is viewed but not killed off when
quitting the msgviewer, thus leading to process leakage. This patch
fixes this by adding a Close method to the msgview widget, which is
called in the close command.
Signed-off-by: Kevin Kuehler <keur@xcf.berkeley.edu>
This ensures that the selectedaccount is returned if currently selected
tab is a messageviewer. This also makes it more extensible for adding
other ways of getting the selected account.
There is a command and config option. The criteria are a list of the
sort criterion and each can be individually reversed.
This only includes support for sorting in the maildir backend currently.
The other backends are not supported in this patch.
This adds the ability for per-account signatures in the accounts.conf
config file. The signature is added to emails in the editor at the
bottom of the email. This includes when forwarding, replying to, and
composing emails.
There are two config options: signature-file and signature-cmd. The
former allows a signature to be read from a file and the latter allows
an arbitrary command to be executed to return the signature.
The config options have been documented in aerc-config
Add an onUpdateDirs handler. This is used to invalidate the dirlist and
redraw with the correct number of recent/unread/total messages is shown.
A config option and formatting options are provided.
This adds the Mouseable interface. When this is implemented for a
component that item can accept and process mouseevents.
At the top level when a mouse event is received it is passed to the
grid's handler and then it trickles down until it reaches a component
that can actually handle it, such as the tablist, dirlist or msglist.
A mouse event is passed so that components can handle other things such
as scrolling with the mousewheel. The components themselves then perform
the necessary actions.
Clicking emails in the messagelist opens them in a new tab.
Textinputs can be clicked to position the cursor inside them.
Mouseevents are not forwarded to the terminal at the moment.
Elements which do not handle mouse events are not required to implement
the Mouseable interface.
Allows to set `ui.spinner=` to a string which is then split by
`ui.spinner-delimiter=` (Default: comma) instead of having a hard coded
animation.
This implementation doesn't use INIs capabilities to split strings as
it trims whitespaces breaking the default animation.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Sometimes I observe out-of-order messages when using a maildir inbox. It
appears that the UIDs for these messages are returned out of order by
the MessageStore. In order for a maildir MessageStore to return messages
in most recently received order, it must have already opened all
messages and parsed the date to use as a sort key. Rather than implement
that, simply sort messages by time as we display. This fix shows my
emails in order.
Usage:
:prompt <prompt> <command...>
Displays the prompt on the status bar, waits for user input, then
appends that input as the last argument to the command and executes it.
The input is passed as one argument to the command, unless it is empty,
in which case no extra argument is added.
The code was trying to compile the `~` as well. In this case, it was
trying to match a literal `~` to the front of the supplied regex.
Fixes: 334ca89bea ("folder filter: only assume regex if filter is
~fmt")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
It's nice to be able to filter the folders displayed in the side
bar. Basic string matching can get verbose with enough folders
whitelisted.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Fixes ~sircmpwn/aerc2#205. Many functions do a nil check on the store,
so this changes Store() so it returns nil when msglist is nil.
It also places the Scroll() behind the nil check in the next-message command.
https://todo.sr.ht/~sircmpwn/aerc2/205
We need some way to signal the backends that we are about to shutdown,
allowing them to clean up (for example in notmuch committing the db changes).
This commit implements a hook which gets called upon shutdown, providing
backends implement the io.Closer interface.
Before, the text/plain part of the multipart MIME message was not being
correctly terminated with its boundary. The multipart writer writes the
terminator when its Close is called, but since the call to Close() was
deferred, it was not being called until after the attachments were being
written resulting in the boundary not being included at all.
Make the msglist aware of whether we are still initializing or not.
We never stopped spinning the msglist if we didn't get any Directories back
from types.ListDirectories.
With this change, we can set the init state from the account and display
the spinner only if we don't know whether we have directories or not and else
the "no messages" string from the config.
Add a "new-message-bell" option to the UI section of aerc.conf. A new
hook into the message store allows the msglist widget to detect new
messages being added to the displayed list. When new messages are
delivered, and the new-message-bell option is enabled (as it is by
default), the terminal will beep.
This allows selection of a tab using its index. It attempts to parse the
given argument as a number, if it fails then it uses it as a name.
Also supports relative indexes using prefixed + or -.
Add a command for removing attachments from a composed message. Syntax
is :detach [path], with path being an optional argument specifying the
path of one existing attachment. If no path is specified, the first
attachment is removed.
Adding an attachment, switching to a different tab, and switching back
to the review message caused the "filled space" in the review message to
disappear, since there was one too many rows in the layout.
This adds tab completion to textinput components. They can be configured
with a completion function. This function is called when the user
presses <tab>. The first completion is initially shown to the user
inserted into the text. Repeated presses of <tab> or <backtab> cycle
through the completions list. The completions list is invalidated when
any other non-tab-like key is pressed.
Also changed is some logic for current completion generation so that
all available commands are returned when <tab> is pressed with no
current text and similarly for arguments of commands.
Aerc will keep track of the previous 1000 commands, which the user can
cycle through using the arrow keys while in the ex-line. Pressing up
will move backwards in history while pressing down will move forward.
This map represents a mapping from directory names to their associated
messagestores anyway so they should be under dirstore. This simply moves
them there and adds some methods required to interact with them.
This patch sets up the trigger config section of aerc.conf.
Each trigger has its own function which is called from the place where
it is triggered. Currently only the new-email trigger is implemented.
The triggers make use of format strings. For instance, in the new-email
trigger this allows the user to select the trigger command and also the
information extracted from the command and placed into their command.
To actually execute the trigger commands the keypresses are simulated.
Further triggers can be implemented in the future.
Formatting of the command is moved to a new package.
This command allows the user to change tab by giving the tab name. This
can be tab completed too. The previous tab is stored in the tabs module
so that when a new tab is created it is still possible to go to the
previous one.
Normal invocation is :ct folder
Previous tab is :ct -
Allow users to add attachments to emails in the Compose view. Syntax is
:attach <path>, where path is a valid file. Attachments will show up in
the pre-send review screen.
A user may want to be able to see what mimetype they are viewing, so
that they can determine what program it may be opened in or for some
other reason.
The config option is under the [viewer] section and is called
'always-show-mime'. It defaults to false to preserve the current
behaviour.
This patch adds the currently pressed keys to the statusline. This is
useful when keybindings are multiple keys long and you might forget
which keys are already pressed.
This introduces a new interface `Clickable`. I'd imagine this would be
implemented for most widgets eventually and would allow for programs run
in the terminal to also have their mouse events forwarded to them.
For the tabs it was relatively simple to check that the position of the
click is within the boxes for the tabs. For other components I'd imagine
that some state representing their currently drawn bounding box would be
useful.
This allows users to use backtab (Shift+tab) to go back through the
fields in the tutorial, like C-K. This then mimics the other methods in
having a forward and backward variant.
Also documented this in the wizard help paragraph.
