Losing your progress in case of a crash, or when accidentally closing
aerc is annoying and costs time. This can be drastically reduced by
keeping a persistent history.
Write commands to XDG_CACHE_DIR/aerc/histfile when they are run and load
them when needed. If another instance of aerc is already writing the
file, fall back to the current model, where the history is kept in
memory.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Some people are worried that they might leak their timezone and wish to
send their mails with the Date header in UTC. For this a new key is
added to the account sections to enforce sending in UTC instead of the
system's timezone.
Suggested-by: "Ricardo Correia" <aerc-lists.sr.ht@wizy.org>
Thanks: to Ricardo for checking and correcting my incorrect assertions
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
When using ephemeral aerc sessions – for example while writing patches
for it – the mailto: functionality breaks if the socket is removed.
Try to send a ping (an empty message) to the socket and remove it, if
the send fails or no noop reply is received.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
The UI runs off a 16 ms ticker. If no render is required, and no event
is seen, aerc waits 16 ms before checking for new events or render
requests. This severely limits handling of events from tcell, and is
particularly noticeable on pasting of large quantities of text.
Process tcell events in a separate go routine from the render loop.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
URLs are extremely loosely defined and can take many shapes which may
not be parsed at all if unusual characters like the exclamation mark are
present. To ensure lists and odd use of spaces are not parsed as links
some sanity-checks are in place:
- the URL's schema must be at least two characters long
- the URL's authority, path, and fragment must have a combined
length of 8 characters or longer
- the URL must not contain a whitespace character, >, ), or "
- the URL may only contain a ] when followed by a different allowed
character or at the end of the line (necessary for IPv6
authorities)
The tests for this function now include links with an exclamation point
and IPv6 addresses. The tests are given names to be easier identifiable.
Link: https://www.iana.org/assignments/uri-schemes/uri-schemes.xhtml
Reported-by: "Bence Ferdinandy" <bence@ferdinandy.com>
Cc: "Koni Marti" <koni.marti@gmail.com>
Fixes: e1d8bc4d17 ("msgviewer: open http links from messages")
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
zoxide is a command line utility, supported by many CLI programs. Enable
zoxide support via the :z command which is a drop-in replacement for :cd
(and calls ChangeDirectory in the background), but also manages adding
paths to and querying from the zoxide database. The command is not
registered if zoxide is not on $PATH.
Link: https://github.com/ajeetdsouza/zoxide
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Robin Jarry <robin@jarry.cc>
outgoing-cred-cmd is used to retrieve the password from a password
manager such as UNIX pass or bitwarden CLI. These tools often prompt for
a passphrase to secure the passwords and it is annoying having to enter
it every time sending an email with aerc.
Add a new option outgoing-cred-cmd-cache (default to true) to control
whether aerc will keep a cache of the password or run outgoing-cred-cmd
every time an email needs to be sent.
NB: If the cached password is incorrect, the only way to change it is to
restart aerc.
Fixes: ca90343850 ("outgoing-cred-cmd: delay execution until an email needs to be sent")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Adjust default values in config.go to follow what is set in the default
aerc.conf file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Fix reggression introduced by 70bfcfef42 ("lint: work nicely with
wrapped errors (errorlint)").
Discovered this because it broke my arec-notmuch config where I have
`exclude-tags=deleted`. Queries with `tag:deleted` would now fail with
error message saying "Argument was ignored".
Fixes: 70bfcfef42 ("lint: work nicely with wrapped errors (errorlint)")
Signed-off-by: Jose Lombera <jose@lombera.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
When quoting an encrypted message for reply, the quoted text is shown as
"Version: 1.0". This is due to this being the first non-multipart text
portion of the message, which is what the quoted reply logic looks for.
Properly quote replies to encrypted messages by decrypting the message,
and quoting the content. The message must be open in a message view in
order to quote it (it must be decrypted, which is handled by the message
viewer).
Suggested-by: Moritz Poldrack <moritz@poldrack.dev>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Jens Grassel <jens@wegtam.com>
Commit 380cf13cff ("msgstore: run threadBuilder with no debounce on
DirectoryContents msg") fixed an issue related to running the
threadbuilder with a debounce. This fix causes the thread builder to run
for any DirectoryContents message, even if the view is not threaded.
Don't call runThreadBuilderNow unless in a threaded view.
Fixes: 380cf13cff ("msgstore: run threadBuilder with no debounce on DirectoryContents msg")
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable path globbing using Go's standard library globbing capabilities,
which allows for attaching multiple files at once.
Suggested-by: Anderson John Njahi <johnjahi55@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the msgstore to specify if an update should also update the
threadbuilder. Certain calls to msgstore.update() did not require the
threadbuilder to run, as it was either called implicitly through other
means (nextPrev during a search) OR it was not needed (IE in the case of
a DirectoryInfo message).
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit 54a0a377e0 ("threads: debounce client-side thread building")
introduced the option to debounce threadbuilding to improve performance
of client side threads. This caused a UI regression during filtering of
mailboxes:
1. The mailbox contains the full set of message UIDs
2. User filters mailbox
3. A DirectoryContents message is received from worker with the proper
UIDs to display
4. Debounce is started (in a separate go routine)
5. The value of msgStore.Uids() is used to show pending headers, but is
not updated until the threadbuilder runs. The full set of UIDs is
shown briefly
6. Debounce is over, threadbuilder runs, updates msgStore.Uids(), proper
messages show.
Run the thread builder immediately upon receipt of a DirectoryContents
message, bypassing any debounce. Performance will remain the same: the
debounce is meant to prevent multiple sequential calls to the thread
builder during scrolling. This is unlikely to occur in rapid succession
from filtering or sorting.
Fixes: https://todo.sr.ht/~rjarry/aerc/76
Fixes: 54a0a377e0 ("threads: debounce client-side thread building")
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The maildir worker watches the file system for events (new mail, moved
mail, copied mail, etc). On an event, the worker sends a
DirectoryContents message and a DirectoryInfo message.
Do not send DirectoryContents on FS Event in the maildir worker. The
DirectoryInfo message already triggers the UI to request the new
DirectoryContents, and does so in a more predictable way (IE any
currently applied filter is applied).
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The built-in maildir.Dir.Move method performs an OS level file rename,
which allows for preserving file creation time. Commit c98f704874
("move: enable MoveMessages from msgstore") enabled the use of the Move
method for maildir. One particular maildir synchronizer (isync/mbsync)
encodes the UID within the filename of the email and cannot recover if
the UID is preserved during a move. mbsync encodes filenames like so:
/path/to/email/{maildir-key},U={uid}:2,S
OfflineIMAP encodes the UID within the filename, but also encodes a hash
of the originating folder so that it can recover from a move without a
rename of the underlying file. OfflineIMAP encodes like so:
/path/to/email{maildir-key},U={uid},FMD5={folder-hash}:2,S
Remove encoded UIDs of the form `,U={uid}` from filenames to prevent
sync issues.
Fixes: https://todo.sr.ht/~rjarry/aerc/75
Fixes: c98f704874 ("move: enable MoveMessages from msgstore")
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Due to multiple levels of nested quoting, it is not possible to escape
spaces and/or quotes from GOFLAGS and pass the value to go build
-ldflags to set a compile time variable.
Encode main.Flags in base64 and decode it when reading it.
Fixes: d7e6dc3649 ("aerc: add build info to version string")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
There were a few hiccups recently. Make sure that there are no
ambiguities.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Reuse the next-message-on-delete configuration flag to mirror the
behavior of delete when archiving.
Signed-off-by: Ben Cohen <ben@bencohen.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Make it possible to specify which account(s) to load. Preserve listed
order when creating account tabs.
aerc -a <account-name[,account-name]>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When there is no Date header in a message, aerc falls back to the
Received header and tries to extract an rfc1123z date from it
(introduced in commit d1600e46). The current regex for extracting the
date incorrectly allows for trailing whitespace, causing time.Parse() to
fail inside of parseReceivedHeader(). As a result, the message's date is
shown as "???????????????????" in the message list and as
"0000-12-31 07:03 PM" in the message view (the latter is likely related
to the zero value of time.Time).
Steps to reproduce:
1) Send yourself a message with no Date header, e.g. with msmtp:
printf 'Subject: foo bar\n\nbody text\n' | msmtp --set-date-header=off me@example.com
2) Note the message's displayed date in aerc's message list and message
view.
Signed-off-by: Thomas Faughnan <tom@tjf.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the use of MoveMessages worker messages from the UI to the
backend. Completes implemention of MoveMessages for all supported
backends.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Implement MoveMessages in the maildir worker. go-maildir supports Move
operations by default, and is functionally equivalent to a OS-level
rename. Creation date of the file is preserved by using Move, which is
used by at least one maildir-to-IMAP synchronizer (isync/mbsync). The
previous move method of copy-and-delete would reset the creation date of
the message, and potentially cause sorting issues in other email
clients.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Implement MoveMessages in the imap backend. go-imap includes the MOVE
Imap extension by default, and if a server does not support it the
command fallsback to a copy-and-delete operation. Servers with the MOVE
extension will see a slight performance increase when moving messages
due to fewer round trips. The IMAP implementation uses a MessagesMoved
worker message to avoid polling the destination mailbox.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Implement MoveMessages handling in the mbox backend. The mbox backend
exists entirely in memory, so the handling is equivalent to a
copy-and-delete.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Introduce a MoveMessages worker message to use for improved message
moving in subsequent patches.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit fdfec2c07a seqmap: refactor seqmap to use slice instead of map
introduced a regression to imap sorting (if supported). The slice passed
to seqmap was being sorted in place by UID, thus breaking any sort order
sent by the server.
Create a copy of the slice to retain the sort order reported to the UI
while also keeping a correct map for seqnum -> UID in the worker.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Example:
$ aerc -v
aerc 0.11.0 +notmuch (go1.18.4 amd64 linux)
Also include that version information in the debug and panic logs.
debug.ReadBuildInfo() is only available in go 1.18+. Add a new variable
set at build time to store $GOFLAGS.
Suggested-by: Tim Culverhouse <tim@timculverhouse.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Fixes the find-next-loop when deleting the last message. The reverse
loop with store.Prev() will break too early because the value of
'previous' was not reset correctly.
Fixes: d941960f "delete: improve find next function"
References: https://todo.sr.ht/~rjarry/aerc/59
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Improve cursor re-positioning while filtering with and without threads.
Reposition cursor in client-side threading mode with a callback that is
set during store.NextPrev(). Run callback when the threads are
constructed in order to reposition the cursor correctly. The callback is
deactivated when store.Select() is called.
Steps to reproduce two issues:
* Reproduce issue 1:
1. Activate client-side threading
2. Apply a filter, e.g. :filter -f Koni
3. Move cursor around so that a message is highlighted
4. clear filter with :clear
5. The cursor is expected to remain on the selected message but is
actually not
* Reproduce issue 2:
1. Activate client-side threading
2. Go the end of the message list
2. Apply a filter, e.g. :filter -f Koni
5. The cursor is now at the end of the filtered results instead of at
the beginning
This patch fixes both of those issues. Tested in regular and threaded
view according to the following check list (expected behavior in
parenthesis):
1. Apply filter from a message that remains in the filter (cursor on message,
message selected)
2. Apply filter from a message that will not remain (cursor at the top,
no message selected)
3. Clear filter (cursor remains on message, message selected)
4. Scroll line-by-line (threads: cursor remains on line, does not "jump"
with message)
5. Search (cursor on first result)
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Fix the following errors:
widgets/dirtree.go:401:18: not enough arguments in call to dt.UiConfig
have ()
want (string) (typecheck)
if dt.UiConfig().DirListCollapse != 0 {
^
widgets/dirtree.go:402:38: not enough arguments in call to dt.UiConfig
have ()
want (string) (typecheck)
node.Hidden = depth > dt.UiConfig().DirListCollapse
^
Since commit e0b62db583c3 ("fix: Set proper UIConfig for msgstores"),
DirectoryTree.UiConfig() takes a path parameter.
Fixes: db39ca181a ("dirtree: add dirtree-collapse config setting")
Signed-off-by: Robin Jarry <robin@jarry.cc>
"behaviour" is not necessarily a typo, but currently 3/4 instances of
the word in the docs use the spelling "behavior".
Signed-off-by: Thomas Faughnan <tom@tjf.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Add language explaining the token_endpoint parameter is actually
optional and what happens when included or omitted.
Signed-off-by: Sean Stiglitz <stigz+sr.ht@netsplit.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds a setting to the configuration to choose at which level the
folders in the dirtree are collapsed by default.
In my case, this is useful because my organisation has some rather deep
nesting in the folder structure, and a _lot_ of folders, and this way I
can keep my dirtree uncluttered while still having all folders there if
I need them.
Signed-off-by: Sijmen <me@sijman.nl>
Acked-by: Koni Marti <koni.marti@gmail.com>
The merged UIConfig used to create new message stores is based on the
selected directory. If the message store is created by other means than
selecting (ListDirectories for maildir/notmuch/mbox, or check-mail) it
may have an incorrect configuration if the user has folder-specific
values for:
- Threaded view
- Client built threads
- Client threads delay
- Sort criteria
- NewMessage bell
Use the correct merged UIConfig when creating a new message store.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix parsing of colons. Since the field separator is also the colon, it
could mess up the parsed fields, i.e. a subject line like "WG: dinner"
could end up as "WG" instead of keeping the entire string.
Fixes: ab941eb ("filters: posix compliant rewrite of calendar filter")
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use FetchDirectoryContents for filtering instead of the SearchDirectory
message. This was an omission from rebasing the mbox worker and from not
realizing that c2f4404f ("threading: enable filtering of server-side
threads") changed the way we filter in the message store for the
server-side threading implementation. This patch enables filtering for
the mbox worker.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Mark or unmark the shown message threads. Threads must be available in the
message store. Use the -T option for the mark or unmark commands. Can be
used in combination with the toggle flag (-t).
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When entering visual selection mode, the current selection is deleted.
This patch extends the visual mode behavior to select multiple blocks of
messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix large archive operations that covers messages in the store with
unfetched headers. Commit e5ad877af5 ("msgstore: fetch missing headers
in visual mode") fixed this for the visual selection mode but omitted
the case when 'mark -a' is used to mark all messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
