Parse the actual user bindings to determine what shortcuts are available
in the compose::review stage. Add a predefined list of commands for
which we want to display the keyboard shortcuts.
Fixes: https://todo.sr.ht/~rjarry/aerc/14
Signed-off-by: Robin Jarry <robin@jarry.cc>
1 second is a bit excessive. Use 200ms which should cover most quick
folder changes.
Add an option to make that delay configurable by the users.
References: https://todo.sr.ht/~rjarry/aerc/16
Fixes: cb3090956c ("dirlist: skip unnecessary change-folder action")
Suggested-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
when traversing the directory list, aerc will fetch the contents for
every directory even though the user might just move on to the next.
This causes an unnecessary delay (and load on the worker) and can be
avoided by skipping the old change-folder action when a newer one
arrives within a predefined time interval.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
improves change-folder responsiveness. When changing folders, the
highlighted directory is currently updated in a callback function to the
open-directory action. This creates an unpleasent lag in the ui until
the entire operation is done. Instead, we should provide an immediate
visual feedback of the selection to the user and keep loading the
directory contents in the background.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
pty.Getsize() is used in the Draw function of the terminal widget and wraps the
pty.GetsizeFull() function. However, pty.Getsize does not check the returned
error from pty.GetsizeFull before dereferencing the winsize struct. In case of
an error, this will cause a nil pointer deference and panic.
This has been reported in the upstream package, but in the meantime, we can
directly use pty.GetsizeFull.
References: https://todo.sr.ht/~rjarry/aerc/11
Signed-off-by: Koni Marti <koni.marti@gmail.com>
if the worker emits a connection error, the ui will automatically send back a
reconnect command. The worker then establishes a new connection. Auto-reconnect
is disabled when the user sends the disconnect command.
Fixes: https://todo.sr.ht/~rjarry/aerc/1
Signed-off-by: Koni Marti <koni.marti@gmail.com>
implements a new connection error message. This allows the worker to emit a
connection-related error message to the ui when the imap client closes the
loggedOut channel.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
fixes the segmentation fault when copy-pasting a large text into the
composer editor. The problem is a concurrent read of the vterm field in the
Terminal widget in its flushTerminal() method which can be avoided with a mutex.
Fixes: https://todo.sr.ht/~rjarry/aerc/12
Signed-off-by: Koni Marti <koni.marti@gmail.com>
as per the discussion https://lists.sr.ht/~sircmpwn/aerc/patches/15367
this handles completions in `completer/completer.go` by enabling the
completer to return a `prefix` that will be prepended to the selected
completion candidate.
implements PGP/MIME encryption with go-pgpmail. The Encrypt() function of
go-pgpmail requires a list of public keys which are taken from the
keystore. The keystore is searched for the email addresses of all
recipients (to, cc, and bcc).
If you want to be able to read the encrypted email afterwards, add
yourself as a recipient in either to, cc, or bcc as well.
Public keys can be exported from gpg into aerc as follows:
$ gpg --export >> ~/.local/share/aerc/keyring.asc
When composing a message, the encryption is enabled with the
":encrypt" command. This sets a bool flag in the Composer struct.
A reapted application of this command will toggle the flag.
The encrypted message can also be signed by using the ":sign"
command before or after ":encrypt".
References: https://todo.sr.ht/~rjarry/aerc/6
Signed-off-by: Koni Marti <koni.marti@gmail.com>
implements PGP/MIME signing with go-pgpmail. The Sign() function of
go-pgpmail requires a private (signing) key. The signing key which matches
the senders email address (from field in email header) is looked up
in aerc's copy of the keyring.
Private keys can be exported from gpg into aerc as follows:
$ gpg --export-secret-keys >> ~/.local/share/aerc/keyring.asc
A message is signed with the ":sign" command. The sign command sets
a bool flag in the Composer struct. Using the command repeatedly will
toggle the flag.
References: https://todo.sr.ht/~rjarry/aerc/6
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Replaces golang.org/x/crypto with github.com/ProtonMail/go-crypto
consistently and updates go-pgpmail to v0.2.0
Signed-off-by: Koni Marti <koni.marti@gmail.com>
When using aerc for multiple accounts often bindings might differ
slightly between accounts. For example:
* Account A archives to one directory (:archive)
* Account B archives to monthly directories (:archive month)
Add account specific bindings to allow the user to add a "context" to a
binding group using a context specifier and a regular expression.
Currently the only context specifier is 'account'.
The regular expression is validated against the accounts loaded from
accounts.conf and the configuration fails to load if there are no
matches.
Contextual bindings are merged with global bindings, with contextual
bindings taking precedence, when that context is active.
Bindings are be configured using a generic pattern of
'view:context=regexp'. E.g.:
# Globally Applicable Archiving
[messages]
A = :read<Enter>:archive<Enter>
# Monthly Archiving for 'Mailbox' Account
[messages:account=Mailbox$]
A = :read<Enter>:archive month<Enter>
In the above example all accounts matching the regular expression will
archive in the monthly format - all others will use the global binding.
Signed-off-by: Jonathan Bartlett <jonathan@jonnobrow.co.uk>
New border-char-horizontal and border-char-vertical config settings in
aerc.conf allow users to modify border appearance from the default
1-wide/tall blank space. In stylesets, border.fg now affects the
foreground color when custom characters are defined.
Signed-off-by: Robin Jarry <robin@jarry.cc>
When using the notmuch backend, it often makes more sense to sort
folders (actual virtual folders, or queries) by the order specified in
the query-map file, rather than alphabetically. This patch introduces a
configuration option (disabled by default) that allows this.
Additionally, due to the notmuch backend previously using maps (which
are order-undefined) to store the list of queries, default query
selection on aerc startup fluctuated. This patch fixes that by using
slices to store query order.
Display threads in the message list. For now, only supported by the
notmuch backend and on IMAP when the server supports the THREAD
extension.
Setting threading-enable=true is global and will cause the message list
to be empty with maildir:// accounts.
Co-authored-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Co-authored-by: Reto Brunner <reto@labrat.space>
Signed-off-by: Robin Jarry <robin@jarry.cc>
When composing a message, there is an empty fill line between the
headers and the text editor. The line is printed with the default style
which may cause users to assume it is part of the editor.
Display the fill lines with the border color to avoid confusion.
Signed-off-by: Robin Jarry <robin@jarry.cc>
When a message has been sent today (or this year) allow formatting the
date differently.
For example, with:
[ui]
index-format=%-25.25n %-25.25D %s
timestamp-format=2006 Jan 02, 15:04 GMT-0700
this-day-time-format=Today at 15:04
this-year-time-format=Jan 02
The message list would look like this (spaces collapsed):
Robin Jarry Today at 16:30 [PATCH 1/2] bindings: prepare for more modifers
bugzilla@dpdk.org Oct 26 [dpdk-dev] [Bug 839] pdump: any subsequent runs of pdump_autotest fail
Holger Levsen 2020 Mar 15, 13:44 GMT+01 +1 (Re: FTP Team -- call for volunteers)
Signed-off-by: Robin Jarry <robin@jarry.cc>
In addition of the common headers (subject, to, from, cc), allow
matching arbitrary email headers in filters. E.g.:
x-bugzilla-severity,critical=tput setaf 1; cat;tput sgr0
Signed-off-by: Robin Jarry <robin@jarry.cc>
This fixes a substantial performance issue when scrolling emails with
long/complicated contents, where scrolling down a single line can take
something like hundreds of ms before the screen is updated to reflect
the scroll. It's really bad if the email has lots of columns, e.g. like
if it's an html email that was passed through a filter (w3m, etc) to
render it.
Using pprof, I found that the multiple calls to vterm.ScreenCell.Attrs()
in styleFromCell were really really expensive. This patch replaces them
with a single call.
Here's a before and after with a simple, but very manual test of opening
a large email with contents that went through a w3m filter and
continuously scrolling up and down over and over for ~30 seconds:
*** Before:
----------------------------------------------------------+-------------
flat flat% sum% cum cum% calls calls% + context
----------------------------------------------------------+-------------
28.25s 100% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.PartSwitcher.Draw
0 0% 99.94% 28.25s 82.31% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.PartViewer.Draw
28.25s 100% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.Terminal.Draw
----------------------------------------------------------+-------------
28.25s 100% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.PartViewer.Draw
0 0% 99.94% 28.25s 82.31% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.Terminal.Draw
19.23s 68.07% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.Terminal.styleFromCell
6.04s 21.38% | github.x2ecom..z2fddevault..z2fgo..z2dlibvterm.Screen.GetCellAt
1.38s 4.88% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2flib..z2fui.Context.Printf
0.62s 2.19% | runtime.mapassign
0.43s 1.52% | runtime.mapaccess2
0.20s 0.71% | runtime.newobject
0.19s 0.67% | runtime.callers (inline)
0.07s 0.25% | runtime.makeslice
0.07s 0.25% | runtime.mallocgc
----------------------------------------------------------+-------------
19.23s 100% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.Terminal.Draw
0 0% 99.94% 19.23s 56.03% | git.x2esr.x2eht..z2f..z7esircmpwn..z2faerc..z2fwidgets.Terminal.styleFromCell
19.21s 99.90% | github.x2ecom..z2fddevault..z2fgo..z2dlibvterm.ScreenCell.Attrs
*** After:
----------------------------------------------------------+-------------
flat flat% sum% cum cum% calls calls% + context
----------------------------------------------------------+-------------
0.31s 100% | git.x2esr.x2eht/~sircmpwn/aerc/widgets.Terminal.Draw
0 0% 99.87% 0.31s 1.33% | github.x2ecom/ddevault/go-libvterm.NewPos
0.25s 80.65% | runtime.callers (inline)
0.04s 12.90% | runtime.gomcache (inline)
----------------------------------------------------------+-------------
8.40s 100% | github.x2ecom/ddevault/go-libvterm.Screen.GetCellAt
0 0% 99.87% 8.40s 36.11% | github.x2ecom/ddevault/go-libvterm.Screen.GetCell
7.14s 85.00% | github.x2ecom/ddevault/go-libvterm._cgoCheckPointer
0.54s 6.43% | runtime.callers (inline)
0.35s 4.17% | runtime.exitsyscall
0.11s 1.31% | runtime.deferprocStack
0.07s 0.83% | doentersyscall
0.07s 0.83% | runtime.getg
0.05s 0.6% | runtime.casgstatus
0.03s 0.36% | _init
0.03s 0.36% | runtime.gomcache (inline)
----------------------------------------------------------+-------------
8.46s 100% | git.x2esr.x2eht/~sircmpwn/aerc/widgets.Terminal.Draw
0 0% 99.87% 8.46s 36.37% | github.x2ecom/ddevault/go-libvterm.Screen.GetCellAt
8.40s 99.29% | github.x2ecom/ddevault/go-libvterm.Screen.GetCell
0.06s 0.71% | runtime.callers (inline)
----------------------------------------------------------+-------------
0.31s 100% | git.x2esr.x2eht/~sircmpwn/aerc/widgets.Terminal.styleFromCell
0 0% 99.87% 0.31s 1.33% | github.x2ecom/ddevault/go-libvterm.ScreenCell.Attrs
)
Also update to the tcell v2 PaletteColor api, which should keep the chosen
theme of the user intact.
Note, that if $TRUECOLOR is defined and a truecolor given, aerc will now stop
clipping the value to one of the theme colors.
Generally this is desired behaviour though.
Prior to this commit, the composer was based on a map[string]string.
While this approach was very versatile, it lead to a constant encoding / decoding
of addresses and other headers.
This commit switches to a different model, where the composer is based on a header.
Commands which want to interact with it can simply set some defaults they would
like to have. Users can overwrite them however they like.
In order to get access to the functions generating / getting the msgid go-message
was upgraded.
Allow styles to be layered over a base style. The list of styles to
apply is layered over the base style in order, such that if the layer
does not differ from the base it is not used. The order that these
styles are applied in is, from first to last:
msglist_default
msglist_unread
msglist_read (exclusive with unread, so technically the same level)
msglist_flagged
msglist_deleted
msglist_marked
So, msglist_marked style dominates.
This fixes an issue where the msglist_deleted style was not being applied.
There is a window where a new dir entry isn't yet in the dirlist.dir.
dirlist.ensureScroll however expected to always find a valid index.
Add a check so that we don't try to scroll to a -1 index.
This allows us to hook into the std libs implementation of parsing related stuff.
For this, we need to get rid of the distinction between a mailbox and a host
to just a single "address" field.
However this is already the common case. All but one users immediately
concatenated the mbox/domain to a single address.
So this in effects makes it simpler for most cases and we simply do the
transformation in the special case.
The `:rmdir` command removes the current directory (`-f` is required if
the directory is not empty).
This is not supported on the notmuch backend.
An issue with the maildir backend is that some sync programs (e.g.
offlineimap) may recover the directory after it is deleted. They need
to specifically be configured to accept deletions, or special commands
need to be executed (e.g. `offlineimap --delete-folder`) to properly
delete folders.
A danger of using this on the IMAP backend is that it is possible for a
new message to be added to the directory and for aerc to not show it
immediately (due to a slow connection) - using `:rmdir` at this moment
(with `-f` if the directory already contains messages) would delete the
directory and the new message that just arrived (and all other
contents). This is documented in aerc(1) so that users are aware of
possible risks.
This can happen for example if aerc is compiled without notmuch support but the
notmuch worker is requested.
Pushing a status message isn't good enough, as this gets overridden pretty
quickly if one has multiple accounts configured.
So we show a fullscreen error instead.
Introduce the ability to configure stylesets, allowing customization of
aerc's look (color scheme, font weight, etc). Default styleset is
installed to /path/to/aerc/stylesets/default.
