Avoid the following issue when running aerc with the default
configuration:
No filter configured for this mimetype ('text/plain')
Use a very basic sed command to replace the default plaintext filter.
Fixes: bb0f180140 ("config: do not hardcode sharedir")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Add an XDG desktop file to handle mailto: links, to make it easier to
reply to mailing list threads and compose emails with aerc in general.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Make the statusbar message after search and filter completion more
informative by showing the full call that was used.
Signed-off-by: inwit <inwit@sindominio.net>
Fix the parsing of internationalized headers (RFC 6532). Enable
unsubscribe to work with regular and encoded headers.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
waits an increasing amount of time before attempting a reconnect.
Wait is capped at 16s. Prevents many reconnect attemps in a short time period.
Fixes commit 05ad96a30c ("imap: improve reconnect stability") that
improved the reliability of the reconnect mechanism but did not
implement controls to prevent the triggering of too many reconnects
within a short period of time.
Fixes: 05ad96a30c ("imap: improve reconnect stability")
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Instead of using a static SHAREDIR at compile time, use a list of
standard paths to use at runtime for templates, config files and
stylesets.
This implies removing all default filters in the default configuration.
Replace them with basic commands. New users can configure the filters as
they wish.
Signed-off-by: Robin Jarry <robin@jarry.cc>
improves the robustness of the imap reconnect feature which was
introduced in commit beae17a6da ("imap: auto-reconnects on connection
error").
If a connection error is emitted, the message list is cleared and a
corresponding error message is shown in the ui. Status bar is updated as
well. Upon reconnect, the directories and the message list will be
re-fetched (same behavior as the connect command).
Reconnect can be enabled and disabled with the connect and the
disconnect commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
re-opens the review UI when the postpone operation fails. Before, the
composer would close, even on error, and we would lose the email draft.
Now, the user can decide on how to proceed when postponing fails.
References: https://lists.sr.ht/~rjarry/aerc-devel/patches/28824
Signed-off-by: Koni Marti <koni.marti@gmail.com>
This channel has not received much activity and all development
discussions are happening on #aerc. No need to multiply channels.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Some messages contain invalid headers, textproto.ReadHeader fails with
an error:
malformed MIME header key: From nobody Fri Jan 14 19
And all other messages of the selected folder are ignored.
Return an explicit error message to the UI and continue processing other
messages. This is consistent with what the maildir worker does.
Signed-off-by: Robin Jarry <robin@jarry.cc>
It is not obvious by reading the license text that aerc is distributed
under the MIT license. Explicitly state it.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Parse the actual user bindings to determine what shortcuts are available
in the compose::review stage. Add a predefined list of commands for
which we want to display the keyboard shortcuts.
Fixes: https://todo.sr.ht/~rjarry/aerc/14
Signed-off-by: Robin Jarry <robin@jarry.cc>
Do not use this to run the debugger. Instead, build a non-optimized
binary and display what command should be executed to attach to
a running program.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Introduce an option in aerc.conf to disable the auto-including
of your own address when replying to your own emails (address
replies to the original To: and Cc: instead); default to true
(allow the auto-including)
Since commit 01c96e78df ("Update DirectoryInfo handling for maildir"),
flags are checked for every message of a folder when entering it.
Iterating over all messages of a folder takes a long time for large
collections of emails.
Only count the number of messages and state that the directory info
counts are not accurate. Defer the parsing of message flags in
a goroutine to have a more responsive UI.
Fixes: https://todo.sr.ht/~rjarry/aerc/16
Suggested-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
1 second is a bit excessive. Use 200ms which should cover most quick
folder changes.
Add an option to make that delay configurable by the users.
References: https://todo.sr.ht/~rjarry/aerc/16
Fixes: cb3090956c ("dirlist: skip unnecessary change-folder action")
Suggested-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
implements a recover command that searches the local temp dir for aerc
emails. If a file is found and selected, a new composer tab will open
with the file contents as the message body. No header data is stored in
the temp file and thus this information cannot be recovered.
Recover will not remove the temporary file unless the force flag (-f) is
explicitly used.
This recovery method only works when the editor buffer is saved to
disk and the Close() function of the composer has not been called yet.
Sending, postponing or quitting will call the Close() function which
removes the temporary file completely. After Close() is called, no
recovery is possible anymore.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Unless a template is specified with reply -T, use the new-message
template for non-quoted replies.
Fixes: 877a94f5d9 ("compose: add default template for new messages")
Signed-off-by: Robin Jarry <robin@jarry.cc>
When provided with a mailto argument, aerc tries to connect to an
existing instance via a unix socket. If that fails, it starts up a new
instance and tries again. However, if that fails again (e.g. if the
unix server could not be started) then the new instance will remain open
without any indication that an error occured. Instead, shutdown the new
instance so the user can see the error message.
After commit 175d0ef ("binds: add account specific bindings"), when
bindings are defined for an account not defined in accounts.conf, aerc
quits with an error. After this commit, a warning is logged and aerc
ignores those bindings.
Signed-off-by: inwit <inwit@sindominio.net>
when traversing the directory list, aerc will fetch the contents for
every directory even though the user might just move on to the next.
This causes an unnecessary delay (and load on the worker) and can be
avoided by skipping the old change-folder action when a newer one
arrives within a predefined time interval.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
improves change-folder responsiveness. When changing folders, the
highlighted directory is currently updated in a callback function to the
open-directory action. This creates an unpleasent lag in the ui until
the entire operation is done. Instead, we should provide an immediate
visual feedback of the selection to the user and keep loading the
directory contents in the background.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
git: 'sendemail' is not a git command. See 'git --help'.
The most similar command is
send-email
Fixes: b84374a572 ("readme: add contribution guide")
Signed-off-by: inwit <inwit@sindominio.net>
fetches missing headers when in visual selection mode. This prevents
large archive operations from panicking due to a nil pointer
dereference.
The archive command will return an error to the ui when a nil message is
encountered to signal that the message store is not ready yet.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
This reverts commit 22ad9e199a.
This breaks install on macOS:
install -m755 -D aerc /usr/local/bin/aerc
install: illegal option -- D
Signed-off-by: Robin Jarry <robin@jarry.cc>
This fixes piped full message (:pipe -m) being empty.
Fixes: 904ffacb0e ("maildir,notmuch: avoid leaking open files")
Signed-off-by: Nguyễn Gia Phong <mcsinyx@disroot.org>
For some unknown reason. tcell does not include the ctrl modifier for
the ctrl-h key event.
Fixes: 7a6c808c04 ("bindings: prepare for more modifers")
Fixes: https://todo.sr.ht/~rjarry/aerc/8
Signed-off-by: Robin Jarry <robin@jarry.cc>
pty.Getsize() is used in the Draw function of the terminal widget and wraps the
pty.GetsizeFull() function. However, pty.Getsize does not check the returned
error from pty.GetsizeFull before dereferencing the winsize struct. In case of
an error, this will cause a nil pointer deference and panic.
This has been reported in the upstream package, but in the meantime, we can
directly use pty.GetsizeFull.
References: https://todo.sr.ht/~rjarry/aerc/11
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Allow defining a default template to use when composing new messages.
Add an example to be used for new users.
Signed-off-by: Robin Jarry <robin@jarry.cc>
