Introduce the ability to configure stylesets, allowing customization of
aerc's look (color scheme, font weight, etc). Default styleset is
installed to /path/to/aerc/stylesets/default.
Introduce the ability to configure stylesets, allowing customization of
aerc's look (color scheme, font weight, etc). Default styleset is
installed to /path/to/aerc/stylesets/default.
Provide search and filter with the option to specify more flag based
conditions.
Use '-x <flag>' to search for messages with a flag (seen, answered,
flagged) and '-X <flag>' to search for messages without a flag.
More mail flags can now be set, unset, and toggled, not just the
read/seen flag.
This functionality is implemented with a new `:flag` and `:unflag`
command, which are extensions to the matching `:read` and `:unread`
commands, adding support for different flags. In fact, the
`read`/`unread` commands are now recognized aliases to `flag`/`unflag`.
The new commands are also well documented in aerc(1).
The change mostly extends the previous read/unread setting functionality
by adding a selection for the flag to change.
Added a 'folders-exclude' option that allows removing selected folders
from the directory list sidebar. My motivating example was that removing
a single folder from the list using Golang regexes seemed pretty hard,
so this is a better way to do it. The excluded folders list is included
in the man page.
The following functionalities are added to configure aerc ui styles.
- Read stylesets from file with very basic fnmatch wildcard matching
- Add default styleset
- Support different stylesets as part of UiConfig allowing contextual
styles.
- Move widgets/ui elements to use the stylesets.
- Add configuration manual for the styleset
This command uses the Postpone folder from the account config to save
messages to. Messages are saved as though they were sent so have a valid
'to' recipient address and should be able to be read back in for later
editing.
This adds the commands pin-tab and unpin-tab. Once pinned a tab lives on
the left of the tabstrip and has a configurable marker, defaulting to `
before its name.
+ Adds parsing of contextual ui sections to aerc config.
+ Add GetUiConfig method for AercConfig that is used to get the
specialized UI config.
+ Add UiConfig method to AccountView to get specialized UI Config.
+ Modifies Aerc codebase to use specialized UIConfig instead.
+ Adds documentation for Contextual UI Configuration
Before, while the docs stated that template-dirs was a colon-separated
list, a delimiter was not specified in the struct tag, so it was falling
back to the default for the ini library (a comma). Also added a note to
the docs to clarify that templates are configured in the [templates]
section.
The functionality was broken since the decoding changes.
This commit also simplifies the code (in my view) to make the application logic
easier to follow.
The docs are updated accordingly (the feature was poorly documented).
As far as I am aware there should be no breaking changes (and is certainly
still in the spec of the prior documentation)
Note that, until we get color configuration, this means that the user *must*
have the %Z verb in the index format else it'll be horribly confusing
as no visual indication is provided
Rather than showing completions inline in the text input, show them in a
popover which can be scrolled by repeatedly pressing the tab key. The
selected completion can be executed by pressing enter.
A new config options for accounts.conf (folders-sort) was added to
allow a user to choose which folders should be shown on top.
My use case was to avoid stepping into heavy, but rarely viewed folders
when cycling through other often accessed ones.
To test add this to your account.conf:
folders-sort = INBOX,Sent,Archive
INBOX, Sent and Archive should then show at the top of your dirlist,
and all other folders should come next in alphabetical order.
+ Changes NewComposer to return error.
+ Add lib to handle templates using "text/template".
+ Add -T option to following commands
- compose.
- reply
- forward
+ Quoted replies using templates.
+ Forwards as body using templates
+ Default templates are installed similar to filters.
+ Templates Config in aerc.conf.
- Required templates are parsed while loading config.
+ Add aerc-templates.7 manual for using template data.
This changes the search flags for maildir and imap backends.
They now no longer use -t for searching all text. This seems to make
more sense as being the targeted recipient. I have similarly added Cc
for -c. The text search now resides under -a for all text.
This adds the ability for per-account signatures in the accounts.conf
config file. The signature is added to emails in the editor at the
bottom of the email. This includes when forwarding, replying to, and
composing emails.
There are two config options: signature-file and signature-cmd. The
former allows a signature to be read from a file and the latter allows
an arbitrary command to be executed to return the signature.
The config options have been documented in aerc-config
Add an onUpdateDirs handler. This is used to invalidate the dirlist and
redraw with the correct number of recent/unread/total messages is shown.
A config option and formatting options are provided.
Allows to set `ui.spinner=` to a string which is then split by
`ui.spinner-delimiter=` (Default: comma) instead of having a hard coded
animation.
This implementation doesn't use INIs capabilities to split strings as
it trims whitespaces breaking the default animation.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Usage:
:prompt <prompt> <command...>
Displays the prompt on the status bar, waits for user input, then
appends that input as the last argument to the command and executes it.
The input is passed as one argument to the command, unless it is empty,
in which case no extra argument is added.
It's nice to be able to filter the folders displayed in the side
bar. Basic string matching can get verbose with enough folders
whitelisted.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Add a "new-message-bell" option to the UI section of aerc.conf. A new
hook into the message store allows the msglist widget to detect new
messages being added to the displayed list. When new messages are
delivered, and the new-message-bell option is enabled (as it is by
default), the terminal will beep.
This allows selection of a tab using its index. It attempts to parse the
given argument as a number, if it fails then it uses it as a name.
Also supports relative indexes using prefixed + or -.
Add a command for removing attachments from a composed message. Syntax
is :detach [path], with path being an optional argument specifying the
path of one existing attachment. If no path is specified, the first
attachment is removed.
Aerc will keep track of the previous 1000 commands, which the user can
cycle through using the arrow keys while in the ex-line. Pressing up
will move backwards in history while pressing down will move forward.
This patch sets up the trigger config section of aerc.conf.
Each trigger has its own function which is called from the place where
it is triggered. Currently only the new-email trigger is implemented.
The triggers make use of format strings. For instance, in the new-email
trigger this allows the user to select the trigger command and also the
information extracted from the command and placed into their command.
To actually execute the trigger commands the keypresses are simulated.
Further triggers can be implemented in the future.
Formatting of the command is moved to a new package.
Allow users to add attachments to emails in the Compose view. Syntax is
:attach <path>, where path is a valid file. Attachments will show up in
the pre-send review screen.
A user may want to be able to see what mimetype they are viewing, so
that they can determine what program it may be opened in or for some
other reason.
The config option is under the [viewer] section and is called
'always-show-mime'. It defaults to false to preserve the current
behaviour.
imaps+oauthbearer://user:token@host?token_endpoint=...
- the config Source password is used as access token if
no token_endpoint parameter is set
- the config Source password is used as refresh token if
token_endpoint parameter is set, and used to exchange
with an access token
The implementation has only been tested with Gmail.
source = imaps+oauthbearer://{username}:{refersh_token}@imap.gmail.com:993? \
client_id=XX&\
client_secret=XX&\
token_endpoint=https%3A%2F%2Faccounts.google.com%2Fo%2Foauth2%2Ftoken
client credentials created with
https://console.developers.google.com/apis/credentials
refresh token created with
https://github.com/google/gmail-oauth2-tools/blob/master/python/oauth2.py
rel: https://todo.sr.ht/~sircmpwn/aerc2/42
The unsubscribe command, available when in a message viewer context,
enables users to easily unsubscribe from mailing lists.
When the command is executed, aerc looks for a List-Unsubscribe header
as defined in RFC 2369. If found, aerc will attempt to present the user
with a suitable interface for completing the request. Currently, mailto
and http(s) URLs are supported. In the case of a HTTP(S) URL, aerc will
open the link in a browser. For mailto links, a new composer tab will be
opened with a message filled out according to the URL. The message is
not sent automatically in order to provide the user a chance to review
it first.
Closes#101
