Add reverse-thread-order option to the ui config to enable reverse
display of the mesage threads. Default order is the the intial message
is on the top with all the replies being displayed below. The reverse
options will put the initial message at the bottom with the replies on
top.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Reverse the order of the messages in the message list. The complexity of
reversing the order is abstracted away by the iterators. To reverse the
message list, add the following to your aerc.conf:
[ui]
reverse-msglist-order=true
Thanks to |cos| for sharing his initial implementation of reversing the
order in the message list [0].
[0]: https://git.netizen.se/aerc/commit/?h=topic/asc_sort_imap
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The ThisDayTimeFormat and friends are missing from the message view
which just uses the message list's default setting. This might not be
desirable since the amount of space available is different. Introduce
separate settings for formatting dates in the message view.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Prevent the embarrassing forgotten attachment scenario by warning the
user before sending a message that may need an attachment but does not
have one. Whether a message needs an attachment is determined by testing
a configurable regex against the message body.
Signed-off-by: Jason Cox <dev@jasoncarloscox.com>
Acked-by: Robin Jarry <robin@jarry.cc>
To allow referencing built-in filters without hard coding a path during
installation, append the following folders to the exec PATH when running
the filter commands:
~/.config/aerc/filters
~/.local/share/aerc/filters
$PREFIX/share/aerc/filters
/usr/share/aerc/filters
If a filter script has the same name than a command in the default exec
PATH, it will not shadow it. In that edge case, the absolute path to the
filter script must be specified.
Suggested-by: Teo Luppi <me@luppi.uk>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add option to open a message in the message viewer without setting the
seen flag. Enables the message viewer to be used as a preview pane
without changing the message flags unintentionally. Before, the message
viewer would set the seen flag by default. The IMAP backend will now
always fetch the message body with the peek option enabled (same as we
fetch the headers).
An "auto-mark-read" option is added to the ui config which is set to
true by default. If set the false, the seen flag is not set by the
message viewer.
Co-authored-by: "James Cook" <falsifian@falsifian.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Instead of xdg-open (or open on MacOS), allow forcing a program to open
a message part. The program is determined in that order of priority:
1) If :open has arguments, they will be used as command to open the
attachment. If the arguments contain the {} placeholder, the
temporary file will be substituted, otherwise the file path is added
at the end of the arguments.
2) If a command is specified in the [openers] section of aerc.conf for
the part MIME type, then it is used with the same rules of {}
substitution.
3) Finally, fallback to xdg-open/open with the file path as argument.
Update the docs and default config accordingly with examples.
Fixes: https://todo.sr.ht/~rjarry/aerc/64
Co-authored-by: Jason Stewart <support@eggplantsd.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Having a default value is confusing because to disable the dynamic time
format, the users need to explicitly configure these settings to the
empty string.
Do not set default values for these settings when they are unset in the
configuration. Comment the default config file values to serve as
examples.
Fixes: aae29324fd ("config: fix default time format values")
Reported-by: Nicolai Dagestad <nicolai@dagestad.fr>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Some people are worried that they might leak their timezone and wish to
send their mails with the Date header in UTC. For this a new key is
added to the account sections to enforce sending in UTC instead of the
system's timezone.
Suggested-by: "Ricardo Correia" <aerc-lists.sr.ht@wizy.org>
Thanks: to Ricardo for checking and correcting my incorrect assertions
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
outgoing-cred-cmd is used to retrieve the password from a password
manager such as UNIX pass or bitwarden CLI. These tools often prompt for
a passphrase to secure the passwords and it is annoying having to enter
it every time sending an email with aerc.
Add a new option outgoing-cred-cmd-cache (default to true) to control
whether aerc will keep a cache of the password or run outgoing-cred-cmd
every time an email needs to be sent.
NB: If the cached password is incorrect, the only way to change it is to
restart aerc.
Fixes: ca90343850 ("outgoing-cred-cmd: delay execution until an email needs to be sent")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Adjust default values in config.go to follow what is set in the default
aerc.conf file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Make it possible to specify which account(s) to load. Preserve listed
order when creating account tabs.
aerc -a <account-name[,account-name]>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds a setting to the configuration to choose at which level the
folders in the dirtree are collapsed by default.
In my case, this is useful because my organisation has some rather deep
nesting in the folder structure, and a _lot_ of folders, and this way I
can keep my dirtree uncluttered while still having all folders there if
I need them.
Signed-off-by: Sijmen <me@sijman.nl>
Acked-by: Koni Marti <koni.marti@gmail.com>
Since the minimum required version of Go has been bumped to 1.16, the
deprecation of io/ioutil can now be acted upon. This Commit removes the
remaining dependencies on ioutil and replaces them with their io or os
counterparts.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Error wrapping as introduced in Go 1.13 adds some additional logic to
use for comparing errors and adding information to it.
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply GoDoc comment policy (comments for humans should have a space
after the //; machine-readable comments shouldn't)
Use strings.ReplaceAll instead of strings.Replace when appropriate
Remove if/else chains by replacing them with switches
Use short assignment/increment notation
Replace single case switches with if statements
Combine else and if when appropriate
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
This can be useful in cases when:
1. outgoing-cred-cmd requires a user action or confirmation (e.g. when
using pass with a Yubikey or similar smart card that requires a user
to enter a pin or touch the device when decrypting the password)
2. A user starts aerc frequently, but not all the sessions end up with
sending emails
3. So the user only wants to execute outgoing-cred-cmd when the password
is really used, so the user doesn't have to enter pin or touch their
Yubikey each time aerc starts
Signed-off-by: Stas Rudakou <stas@garage22.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Debounce client-side thread building in the message store. Debouncing is
useful when multiple messages are loaded, i.e. when scrolling with
PgUp/PgDown.
Without the debouncing, all client-side threads will be built everytime
the message store is updated which creates a noticable lag in the
message list ui when client-side threading is activated.
The default debouncing delay can be changed by changing
'client-threads-delay' in the UI config section.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
When using multiple accounts, the contacts may be different. Allow using
specific address book commands per account.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
GetUiConfig was being called many times, and came up as a high CPU user
in a cpuprofile. Every call would merge a UIConfig, which is a costly
operation. Ideally, we would only need to have a config for every
account X every directory. We also have a context for subjects. This
patch stores all FOLDER and ACCOUNT level configs and reuses those
merged objects. The SUBJECT contexts are not stored in favor of merging
on-the-go, with a TODO comment to deprecate that feature and implement a
better per-message styling option. I suspect this feature is not used
very much.
Before applying this patch with my setup, GetUiConfig is called 1159
times just to open aerc. After applying, this is reduced to 37.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch changes references to uiConfig in function signatures and
structs to be pointers.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When using section.MapTo(struct) (go-ini), if the struct has a default
value for a time.Duration type, a zero-value in the config will not
overwrite the default. If the type is *time.Duration, it will be
overwritten properly. One consideration was to change all
time.Duration types to *time.Duration. This method was chosen for ease
of implementation.
For example, if you set dirlist-delay = 0s, the delay will be 200ms.
This can be observed by logging the value just after mapping the ui
section in config.go. A config value of 0.1ms will have a delay of
0.1ms.
Currently, aerc has 4 time.Duration config values:
1. DirlistDelay - default 200 ms
2. CompletionDelay - default 250 ms
3. CheckMail - default unset (0)
4. CheckMailTimeout - default 10 s
1, 2, and 4 have a non-zero default value and are subject to this bug.
Only 1 and 2 are fixed in this patch. Number 4 would not make sense to
have a 0 second timeout, therefore we can prevent the user from doing
this by keeping it as it is.
Another option could be to set these to 0 in config.go. The default
config (aerc.conf) has these keys in it with their default values.
Presumably, we don't need to set them again in config.go. If a user
deletes the config values out of aerc.conf, the UI will function but
with 0s delays.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Add option to specify folder-specific binds for message lists. The binds
are layered: any existing binds in [messages] are overwritten by a more
specific bind in say, [messages:folder=Drafts]. The order is currently:
[messages] < [messages:account=<account>] < [messages:folder=<folder>]
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit refactors the internal PGP implementation to make way for
GPG integration.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This adds the option "unsafe-accounts-conf" under the section [general]
of aerc.conf. This allows an user to specify if the accounts.conf file
must be restrict to be read by the file owner (0600).
By default it is set to "false".
Signed-off-by: Victor Freire <victor@freire.dev.br>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
os.Stat might return other errors aside from one stating that the file
does not exist. If it does, propagate the error down. As before, if the
file does not exist, just do nothing.
Signed-off-by: Connor Kuehl <cipkuehl@gmail.com>
Reviewed-by: Moritz Poldrack <moritz@poldrack.dev>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
This commit fixes all occurrences of the abovementioned lint-error in
the codebase.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
When trying to search in less, keys bound to viewer functions can't be
used as part of the search query, which makes the search useless.
Add a view::passthrough binding mode and a :toggle-key-passthrough
command go toggle in and out of that mode. By default, typing '/' in the
viewer is bound to enabling key passthrough and automatically inserting
'/', to easily enter "less" search mode. When in the passthrough mode,
all bindings are ignored by default. The default binds.conf only defines
a single keybinding in that mode: <Esc> to get back out. $ex is bound to
<C-x> to allow typing colons.
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Will expand a user-provided custom sharedir, XDG_CONFIG_HOME and
XDG_DATA_HOME if necessary. Will not alter those strings if they do not
begin with a tilde.
Signed-off-by: Daniel Patterson <me@danielpatterson.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
We should use the Makefile value of SHAREDIR when searching for config
files and templates etc.
This is important for systems which do not use the standard file
hierarchy or which do not have a consistent location for installing
program files, for example NixOS, which will have a different install
location with every update.
Signed-off-by: Daniel Patterson <me@danielpatterson.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
implement a foldable tree for the directory list. Expand all parent
directories when a hidden directory is selected with the change-folder
command.
folders-sort considers the top-level directories only. The folders and
foldersexclude filters work with the full directory path.
Enable tree view by adding 'dirlist-tree=true' to the config file.
Implements: https://todo.sr.ht/~sircmpwn/aerc2/228
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Instead of using a static SHAREDIR at compile time, use a list of
standard paths to use at runtime for templates, config files and
stylesets.
This implies removing all default filters in the default configuration.
Replace them with basic commands. New users can configure the filters as
they wish.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Introduce an option in aerc.conf to disable the auto-including
of your own address when replying to your own emails (address
replies to the original To: and Cc: instead); default to true
(allow the auto-including)
Koni Marti
Bence Ferdinandy
Jason Cox
Robin Jarry
Moritz Poldrack
Tobias Wölfel
Tim Culverhouse
Sijmen
Stas Rudakou
Victor Freire
Connor Kuehl
kt programs
Daniel Patterson
inwit
john1doe@ya.ru