Since the minimum required version of Go has been bumped to 1.16, the
deprecation of io/ioutil can now be acted upon. This Commit removes the
remaining dependencies on ioutil and replaces them with their io or os
counterparts.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Delete operations are not supported by the notmuch backend. Revert
deleted messages when the operation is not supported, and reselect the
original selection.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix the following test failures:
FAIL: TestMessageInfoHandledError (0.00s)
parse_test.go:53: could not parse envelope: date parsing failed:
unrecognized date format:
FAIL: TestReader (0.07s)
gpg_test.go:27: using GNUPGHOME = /tmp/TestReader2384941142/001
reader_test.go:108: Test case: Invalid Signature
reader_test.go:112: gpg.Read() = gpgmail: failed to read PGP
message: gpg: failed to run verification: exit status 1
Fixes: 5ca6022d00 ("lint: ensure errors are at least logged (errcheck)")
Fixes: 70bfcfef42 ("lint: work nicely with wrapped errors (errorlint)")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Error wrapping as introduced in Go 1.13 adds some additional logic to
use for comparing errors and adding information to it.
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply GoDoc comment policy (comments for humans should have a space
after the //; machine-readable comments shouldn't)
Use strings.ReplaceAll instead of strings.Replace when appropriate
Remove if/else chains by replacing them with switches
Use short assignment/increment notation
Replace single case switches with if statements
Combine else and if when appropriate
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Replaces infinite for loops containing a select on a channel with a
single case with a range over the channel.
Removes redundant assignments to blank identifiers.
Remove unnecessary guard clause around delete().
Remove `if condition { return true } return false` with return condition
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit 27425c15c4 ("autocompletion: fix slice out of bounds access")
introduced a regression in the autocompletion that messes up the order
of last entered chars when autocompletion runs.
The ranges for a slice a[low:high] are 0 <= low <= high <= len(a) [0]
To reproduce with the ":cf" command:
1) enter ":c"
2) wait for autocompleteion
3) enter "f"
4) the prompt will now be ":fc"
[0]: https://go.dev/ref/spec#Slice_expressions
Fixes: 27425c15c4 ("autocompletion: fix slice out of bounds access")
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Select the first message with NextPrev when the cursor disappears after
applying a filter where the selected message is not part of. Currently,
the NextPrev would select the last message in the mailbox (like a G
jump).
To reproduce:
1) select a message
2) apply a filter where the selected message is not selected
3) move the cursor and it will jump to the last message
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This is a workaround for https://todo.sr.ht/~rjarry/aerc/22, by
injecting zero-width spaces in front of wide characters to make up width
calculation in fmt.Sprintf.
With this applied, columns will still be misaligned a little only if
they are left with trailing zero-width spaces when cut. It is better
than a large offset caused by each wide characters in the column.
References: https://todo.sr.ht/~rjarry/aerc/22
Signed-off-by: Pinghao Wu <xdavidwuph@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Fix a regression introduced by commit c2f4404fca ("threading: enable
filtering of server-side threads"). Prior to this commit, a :sort
command (no args) would clear out the current sort criteria (or rather,
apply the value from the config). Restore this functionality.
Fixes: c2f4404fca ("threading: enable filtering of server-side threads")
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use the capabilities returned by the backend to check whether sort is
implemented when the user tries to use the sort command. Print a warning
to the log when a sort request is silently dropped by the backend.
Suggested-by: |cos|
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Try to keep the position in the message list when scrolling through
threaded messages to match the scrolling behavior of the regular view.
This only needs to be implemented for the client-side threading since we
have to rebuild the threads when new messages arrive.
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Client-side thread debouncing happens in a different goroutine. Any
function or variable that is called or accessed by this goroutine should
be protected from a concurrent access.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Debounce client-side thread building in the message store. Debouncing is
useful when multiple messages are loaded, i.e. when scrolling with
PgUp/PgDown.
Without the debouncing, all client-side threads will be built everytime
the message store is updated which creates a noticable lag in the
message list ui when client-side threading is activated.
The default debouncing delay can be changed by changing
'client-threads-delay' in the UI config section.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the message store architecture from an index-based to a uid-based
one. Key advantage of this design approach is that no reselect mechanism
is required anymore since it comes with the design for free.
Fixes: https://todo.sr.ht/~rjarry/aerc/43
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Calling :prev without this check can cause the index to go below 0 if
the current index is smaller than the value being scrolled / incremented
by. This results in the email selector wrapping around from the top to
the bottom most email in the mailbox folder due to changes in ec150f0
'store: fix Select behaviour'.
Signed-off-by: akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor NextPrev to use already existing selection methods and bounds
checking
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix the behavior of the Select(index int) method to select the last
message if an index > len(list) or select from bottom of list for
negative indexes.
Thanks: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Protect the access to the tabs array and current index with a mutex.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
The Tabs object exposes an array of Tab objects and the current selected
index in that array. The these two fields are sometimes modified in
goroutines, which can lead to data races causing fatal out of bounds
accesses on the tab array.
Hide these fields as private API. Expose only what needs to be seen from
the outside. This will prepare for protecting concurrent access with
a lock in the next commit.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
This makes it more explicit for non pgp compatible clients. Without
this, they may show "unnamed part" or "noname".
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This reverts commit d7feb56cbe.
This commit introduced a regression in which upon closing any but the
last tab caused an out of range panic would occur.
Steps to reproduce
- open a tab
- open another tab
- close the first tab
Fixes: https://todo.sr.ht/~rjarry/aerc/58
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit 3a614e45fc ("threading: enable toggle-threads for server-side
threads") changed the behavior of the msgstore.buildThreads variable to
reflect whether the client needs to build threads or the server will.
However, a call to runThreadbuilder was not updated with an extra
conditional. As a result, threads were built regardless of the state of
the threadedView resulting in a large performance penalty for
non-threaded views with client side threading.
Only run thread builder if threaded view is enabled.
Fixes: 3a614e45fc ("threading: enable toggle-threads for server-side threads")
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Tests in lib/structure_helpers_test.go pass on amd64 platforms but fail
on 386 platforms. This can be reproduced with the following steps:
1. Create a Dockerfile in aerc's source folder:
FROM i386/alpine:edge
RUN apk update && apk upgrade
RUN apk add --no-cache go make scdoc
WORKDIR aerc
COPY . .
RUN make
CMD make tests
2. Build the image:
$ docker buildx build --platform=linux/386 -t test .
3. Run the image:
$ docker run --rm --platform=linux/386 -it test
The test in lib/structure_helpers_test.go will fail.
If the same above steps are done with this patch applied, all tests pass.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use Aerc as an mbox viewer. Open an mbox file from the command line in a
new tab with the mbox backend. Provide a convenient and quick way to
display emails from an mbox.
Usage: aerc mbox://<path>
where the path can either be a directory or an mbox file. If it is a
directory, every file with an .mbox suffix will be loaded as a folder.
The account config will be copied from the selected account. This allows
the answer emails in the mbox account.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch refactors reselection of a message during certain operations
(searching, filtering, clearing, deleting, moving, new message arrival).
The addition of server-side filtering for threaded views broke the
existing reselection logic.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch enables the filtering of a threaded view which uses
server-built threads. Filtering is done server-side, in order to
preserve the use of server-built threads.
In adding this feature, the filtering of notmuch folders was brought up
to feature parity with the other workers. The filters function the same
(ie: they can be stacked). The notmuch filters, however, still use
notmuch syntax for the filtering.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Move and Delete commands perform a store.update() when their worker is
completed and also when the method is called. This patch removes the
call performed in the store.Move and store.Delete methods.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This change fixes a panic caused by the selected tab being out of sync
when selecting a new one in widgets.(*Aerc).SelectedTab(). This happens
if the tab is already removed from the list of tabs, but the selection
not yet being updated.
This was achieved by moving the tabs behind updating the selection.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
This patch changes references to uiConfig in function signatures and
structs to be pointers.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all non-multipart attachments with the -A flag. Rename the flag
for forwarding a full message as an RFC2822 attachments to -F.
Suggested-by: psykose
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Refactor the attachment handling process in the composer. The composer
can currently only handle attachments that are stored as files (or pgp
keys). This patch removes this limitation so that any message part can
be handled as an attachment. With this we can treat files, pgp keys and
message parts on an equal footing and it will enable us also to easily
forward attachments.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
An non-zero exit code from the execution of gpg during decryption would
prevent aerc from parsing the output of gpg. The output should always be
parsed. Gpg can exit with an error due to not being able to validate a
signature. Aerc handles this error with the UI, and therefore all output
should be parsed regardless of exit state of gpg. The parsing of stdout
will find the errors and report back to aerc properly.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add error handling for messages that were unable to be encrypted.
Previously, messages that failed encryption would be sent with no
content. This patch adds error handling - when encryption fails, the
user is returned to the Review screen and instructed to check the public
keys for their recipients.
Reported-by: Moritz Poldrack <moritz@poldrack.dev>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Fix the following go vet error:
lib/calendar/calendar.go:191:11: github.com/arran4/golang-ical.Attendee
composite literal uses unkeyed fields
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
In order to better align to vim functionality: deselect visual mode
selections after performing a command on the selection. This patch also
introduces a new command to allow for re-selecting (remarking) the
previous selection set so that commands can be chained together. The
deselection only applies to msg commands that *do not* move the message
from the store (those types of commands already deselect):
- read/unread
- flag/unflag
- modify-labels
- copy
- pipe
Previous usage to mark several messages as read and deselect all:
Vjjj:read<Enter>:unmark -a<Enter>
New usage, similar to vim:
Vjjj:read<Enter>
To chain a command together:
Vjjj:read<Enter>:remark<Enter>{next command}<Enter>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Clean marked messages after new uids are fetched.
Commit 5c5158b3 ("store: remove callbacks on error") removed side
effects in the message store after a longer suspend period but neglected
to remove marked zombie messages.
References: https://todo.sr.ht/~rjarry/aerc/28
Co-authored-by: inwit <inwit@sindominio.net>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Reply to iCalendar invitations with three commands: :accept,
:accept-tentative or :decline. Parse a text/calendar request, create a
reply and append it to the composer.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor lib/crypto/gpg tests to facilitate unit test runs on macos.
Macos creates temporary directories with names too long to call
gpg-agent (108 characters). Additionally, too many concurrent test calls
created IPC errors to gpg-agent. To get around this, tests were given
shorter names and refactored into subtests to create fewer concurrent
tests
Tested on Linux and MacOS.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Skip the tests if gpg is not installed.
Avoid interference with the global ~/.gnupg.
Automatically delete GNUPGHOME at the end of tests.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Add compose command ("attach-key") to attach the public key associated
with the sending account. Public key is attached in ascii armor format,
with the mimetype set according to RFC 3156 ("application/pgp-keys").
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Add check for public keys of all message recipients (to, cc, and bcc)
before sending the message. Adds an OnFocusLost callback to header
editors to facilitate a callback for checking keys whenever a new
recipient is added (OnChange results in too many keyring checks).
Once encryption is initially set, the callbacks are registered. If a
public key is not available for any recipient, encryption is turned off.
However, notably, the callbacks are still registered meaning as s soon
as the user removes the recipients with missing keys, encryption is
turned back on.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Unmark deleted messages and remove pending headers in the callback
function when an error in the backend occurs (e.g. due to connection
issues).
The message store marks messages that should be deleted. If the delete
operation in the backend fails, messages are never unmarked and will
remain rendered as empty lines in the message list. This also affects
the move and archive commands that rely on a copy and delete operation.
A similar issue occurs with the pending headers when the operation to
fetch them fails. In this case, messages will appear as loading
indefinitely in the message list and are never re-fetched because the
corresponding pending headers from the failed operations are still
present.
Fixes: https://todo.sr.ht/~rjarry/aerc/28
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The gpg decrypt function was catching errors but not returning them.
This patch returns errors that are caught instead of aerc panicking.
Reported-by: ReK2 <rek2@hispagatos.org>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: ReK2 <rek2@hispagatos.org>
Acked-by: Robin Jarry <robin@jarry.cc>
Check that the signing key exists when the user issues the :sign
command. The signing key ID will be displayed in the security status
also, allowing the user to see what key will be used to sign the
message.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Jens Grassel <jens@wegtam.com>
Add the format specifier %N to the dirlist-format to display compacted
folder names.
A folder such as INBOX/WORK/PROJECT will be compacted to I/W/PROJECT in
the directoy list.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
aerc panics when using macOS's default terminal emulator, Terminal.app,
when closing all but aerc's tab:
This error was also written to: /tmp/aerc-crash-20220427-194134.log
panic: Attempted to create context with negative offset [recovered]
panic: Attempted to create context with negative offset
goroutine 1 [running]:
git.sr.ht/~rjarry/aerc/logging.PanicHandler()
/Users/ckuehl/src/aerc/logging/panic-logger.go:47 +0x58c
panic({0x100d077a0, 0x14000032700})
/opt/homebrew/Cellar/go/1.18.1/libexec/src/runtime/panic.go:844 +0x258
git.sr.ht/~rjarry/aerc/lib/ui.(*Context).Subcontext(0x1400013e420?, 0x14000202360?, 0x140000ffc48?, 0x1009a10e4?, 0x100da9440?)
/Users/ckuehl/src/aerc/lib/ui/context.go:47 +0x160
git.sr.ht/~rjarry/aerc/lib/ui.(*Grid).Draw(0x1400013e420, 0x14000202360)
/Users/ckuehl/src/aerc/lib/ui/grid.go:143 +0x2bc
git.sr.ht/~rjarry/aerc/widgets.(*Aerc).Draw(0x1400013e4d0, 0x14000202360)
/Users/ckuehl/src/aerc/widgets/aerc.go:178 +0x30
git.sr.ht/~rjarry/aerc/lib/ui.(*UI).Tick(0x1400022bcc0)
/Users/ckuehl/src/aerc/lib/ui/ui.go:116 +0x248
main.main()
/Users/ckuehl/src/aerc/aerc.go:226 +0x9e8
I'm not entirely sure what the interactions are between the terminal
emulator, aerc's grid, and the space that moves around when the tab bar
disappears because there are no more tabs, but this fixes the issue 100%
of the time and I haven't noticed any issues.
Signed-off-by: Connor Kuehl <cipkuehl@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit refactors the internal PGP implementation to make way for
GPG integration.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Ensure CRLF line endings in the pgpmail reader. Fix the pgp signature
verification for maildir and notmuch.
These backends do not return the full message body with CRLF
line endings. But the accepted OpenPGP convention is for signed data to
end with a <CR><LF> sequence (see RFC3156).
If this is not the case the signed and transmitted data are considered
not the same and thus signature verification fails.
Link: https://datatracker.ietf.org/doc/html/rfc3156
Reported-by: Tim Culverhouse <tim@timculverhouse.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Keep current message selected when clearing or changing filters and when
toggling threads.
Add -s flag to the clear command to also clear the selected message and
set cursor to the top of the message list.
Implements: https://todo.sr.ht/~rjarry/aerc/36
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use contextual ui styleset for tabs and compose widgets. If no account
is selected, use default styleset as fallback.
Fixes: https://todo.sr.ht/~rjarry/aerc/3
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix the "no envelope available for this message" error that can occur
when using the same imap mailbox in another mailclient (e.g.
through a webmail interface) at the same time.
Complements the fixes in commit 7fe7fe4 ("ui: fix panic in header
formatter") and commit 074b0a1 ("view,list: fix crash when viewing
incomplete imap messages").
The error is caused when a message attribute update is received by the
message store before the message list had a chance to fetch the proper
header first. In this case, an (incomplete) message info is stored in
the message store and the message list will never fetch the correct
header. To prevent this, add only messages to the store with a non-nil
envelope but make sure that message attribute updates are properly
merged.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Sort the message list even when a filter is applied according to the
sort criteria given by the sort command.
Currently, the sort command has no effect when a filter is in use.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Keep the sort criteria applied to the selected folder until the default
sort order should be restored. Call the sort command without arguments
to restore the default sort order.
The current behavior is that the default sort order is restored as soon
as the folder reloads. This happens often and then the results of the
sort command are lost. This makes the sort command not very
user-friendly. Instead, we should keep the sort criteria applied until
the user explicitly wants to restore the default sort order again.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This callback is actually invoked in a goroutine by time.AfterFunc. The
panic handler must be explicitly installed.
Link: https://github.com/golang/go/blob/go1.18/src/time/sleep.go#L160-L173
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Fix order in the references header when an in-reply-to msg-id is
erroneously added at the beginning instead of at the end. Add
description to the function that cleans up the reference headers for
threading.
Reported-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since panics still regularly "destroy" the terminal, it is hard to get a
stack trace for panics you do not anticipate. This commit adds a panic
handler that automatically creates a logfile inside the current working
directory.
It has to be added to every goroutine that is started and will repair
the terminal on a panic.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Make statusline folder-specific. Update filter, search and threading
status when changing folders.
Commit 2512c04 ("statusline: implement per-account status") introduced
an account-specific statusline. This makes it account- and
folder-specific.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Fix stack overflow from faulty headers that cause a circularity in the
threading algorithm. Remove duplicated message-ids in the references
headers. Check that the message-id itself is not part of the references.
Fixes: https://todo.sr.ht/~rjarry/aerc/32
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Robin Jarry <robin@jarry.cc>
Acked-by: Robin Jarry <robin@jarry.cc>
Update message counter in msglist when the filter is changed (either set or
cleared in the msgstore).
When we apply a filter, we change the number of uids in the message
store. This can unintentionally trigger the storeUpdate() function of
the msglist which checks the number of uids for new messages and
advances the pointer by the difference in the number of messages. This
can be avoided when we update the message counter upon changing the
filter.
Fixes: https://todo.sr.ht/~rjarry/aerc/23
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Implement a statusline state for each account. Keep the ex line and the
push notifications global. Add account name prefix to push
notifications. Prefix status line with account name when multiple
accounts are available.
Use account-specific status line for each tab where an account is
defined.
Handle threading, filter/search, viewer passthrough and connection
status.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit fixes all occurrences of the abovementioned lint-error in
the codebase.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable consecutive filter and search queries. Filter narrows down
message list consecutively and clears search results. Search applies to
the current message list.
Fixes: https://todo.sr.ht/~rjarry/aerc/24
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Inwit <inwit@sindominio.net>
Tested-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Apply the user-defined sort criteria to the message with the highest
uid in a threaded discussion. Restore the default sort order when
leaving threading mode.
Commit 7811620eb8 ("threading: implement on-the-fly message
threading") introduced message threading with the threaded messages
being only sorted by their message uids irrespective of the defined sorting
criteria. It did not restore the default sort order either.
Reported-by: Sebastien Binet <s@sbinet.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The kept socket after crashes or unclean exits can lead to a unexpected
behaviour. This commit just removes dangling sockets if they exist.
Since the "does not exist" error is the best case scenario error
handling was deemed unnecessary.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
implement message threading on the message store level using the
jwz algorithm. Build threads on-the-fly when new message headers arrive.
Use the references header to create the threads and the in-reply-to
header as a fall-back option in case no references header is present.
Does not run when the worker provides its own threading (e.g. imap
server threads).
Include only those message headers that have been fetched and are
stored in the message store.
References: https://www.jwz.org/doc/threading.html
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Inwit <inwit@sindominio.net>
Tested-by: akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Instead of using a static SHAREDIR at compile time, use a list of
standard paths to use at runtime for templates, config files and
stylesets.
This implies removing all default filters in the default configuration.
Replace them with basic commands. New users can configure the filters as
they wish.
Signed-off-by: Robin Jarry <robin@jarry.cc>
fetches missing headers when in visual selection mode. This prevents
large archive operations from panicking due to a nil pointer
dereference.
The archive command will return an error to the ui when a nil message is
encountered to signal that the message store is not ready yet.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
as per the discussion https://lists.sr.ht/~sircmpwn/aerc/patches/15367
this handles completions in `completer/completer.go` by enabling the
completer to return a `prefix` that will be prepended to the selected
completion candidate.
implements PGP/MIME encryption with go-pgpmail. The Encrypt() function of
go-pgpmail requires a list of public keys which are taken from the
keystore. The keystore is searched for the email addresses of all
recipients (to, cc, and bcc).
If you want to be able to read the encrypted email afterwards, add
yourself as a recipient in either to, cc, or bcc as well.
Public keys can be exported from gpg into aerc as follows:
$ gpg --export >> ~/.local/share/aerc/keyring.asc
When composing a message, the encryption is enabled with the
":encrypt" command. This sets a bool flag in the Composer struct.
A reapted application of this command will toggle the flag.
The encrypted message can also be signed by using the ":sign"
command before or after ":encrypt".
References: https://todo.sr.ht/~rjarry/aerc/6
Signed-off-by: Koni Marti <koni.marti@gmail.com>
implements PGP/MIME signing with go-pgpmail. The Sign() function of
go-pgpmail requires a private (signing) key. The signing key which matches
the senders email address (from field in email header) is looked up
in aerc's copy of the keyring.
Private keys can be exported from gpg into aerc as follows:
$ gpg --export-secret-keys >> ~/.local/share/aerc/keyring.asc
A message is signed with the ":sign" command. The sign command sets
a bool flag in the Composer struct. Using the command repeatedly will
toggle the flag.
References: https://todo.sr.ht/~rjarry/aerc/6
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Replaces golang.org/x/crypto with github.com/ProtonMail/go-crypto
consistently and updates go-pgpmail to v0.2.0
Signed-off-by: Koni Marti <koni.marti@gmail.com>
There was a change in how build tags are formatted. Use this as new
reference.
Link: https://go.dev/doc/go1.17#gofmt
Signed-off-by: Robin Jarry <robin@jarry.cc>
Fix the following build error on mac os:
worker/imap/worker.go:368:29: undefined: syscall.TCP_KEEPCNT
worker/imap/worker.go:376:29: undefined: syscall.TCP_KEEPINTVL
These symbols are not defined on darwin.
Fixes: 5dfeff75f3 ("imap: add tcp connection options")
Signed-off-by: Robin Jarry <robin@jarry.cc>
New border-char-horizontal and border-char-vertical config settings in
aerc.conf allow users to modify border appearance from the default
1-wide/tall blank space. In stylesets, border.fg now affects the
foreground color when custom characters are defined.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Display threads in the message list. For now, only supported by the
notmuch backend and on IMAP when the server supports the THREAD
extension.
Setting threading-enable=true is global and will cause the message list
to be empty with maildir:// accounts.
Co-authored-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Co-authored-by: Reto Brunner <reto@labrat.space>
Signed-off-by: Robin Jarry <robin@jarry.cc>
With IMAP, due to an unidentified reason, some messages to not have any
body accessible. When viewing them, aerc crashes:
git.sr.ht/~sircmpwn/aerc/lib.usePGP
lib/messageview.go:37
git.sr.ht/~sircmpwn/aerc/lib.NewMessageStoreView
lib/messageview.go:67
git.sr.ht/~sircmpwn/aerc/commands/account.ViewMessage.Execute
commands/account/view.go:45
git.sr.ht/~sircmpwn/aerc/commands.(*Commands).ExecuteCommand
commands/commands.go:66
main.execCommand
aerc.go:61
main.main.func2
aerc.go:160
aerc crashed: runtime error: invalid memory address or nil pointer
dereference
Check the pointer before dereferencing.
Also, add a global check in ParseMessageFormat where a similar issue may
occur.
Signed-off-by: Robin Jarry <robin@jarry.cc>
When composing a message, there is an empty fill line between the
headers and the text editor. The line is printed with the default style
which may cause users to assume it is part of the editor.
Display the fill lines with the border color to avoid confusion.
Signed-off-by: Robin Jarry <robin@jarry.cc>
When a message has been sent today (or this year) allow formatting the
date differently.
For example, with:
[ui]
index-format=%-25.25n %-25.25D %s
timestamp-format=2006 Jan 02, 15:04 GMT-0700
this-day-time-format=Today at 15:04
this-year-time-format=Jan 02
The message list would look like this (spaces collapsed):
Robin Jarry Today at 16:30 [PATCH 1/2] bindings: prepare for more modifers
bugzilla@dpdk.org Oct 26 [dpdk-dev] [Bug 839] pdump: any subsequent runs of pdump_autotest fail
Holger Levsen 2020 Mar 15, 13:44 GMT+01 +1 (Re: FTP Team -- call for volunteers)
Signed-off-by: Robin Jarry <robin@jarry.cc>
Moritz Poldrack
Tim Culverhouse
Robin Jarry
Koni Marti
Pinghao Wu
akspecs
Connor Kuehl
Pranjal Kole
Parasrah
Dian M Fay
y0ast
Adnan Maolood