Add reverse-thread-order option to the ui config to enable reverse
display of the mesage threads. Default order is the the intial message
is on the top with all the replies being displayed below. The reverse
options will put the initial message at the bottom with the replies on
top.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Reverse the order of the messages in the message list. The complexity of
reversing the order is abstracted away by the iterators. To reverse the
message list, add the following to your aerc.conf:
[ui]
reverse-msglist-order=true
Thanks to |cos| for sharing his initial implementation of reversing the
order in the message list [0].
[0]: https://git.netizen.se/aerc/commit/?h=topic/asc_sort_imap
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The ThisDayTimeFormat and friends are missing from the message view
which just uses the message list's default setting. This might not be
desirable since the amount of space available is different. Introduce
separate settings for formatting dates in the message view.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Robin Jarry <robin@jarry.cc>
A little coding hygiene cannot hurt. Add a simple awk script to check
all source files for bad white space habits:
- trailing white space
- trailing new lines at the end of files
- missing new line at the end of files
- spaces followed by tabs
The script outputs color when the terminal supports it. It exits with
a non-zero code when there was at least one white space issue found.
Call the script in the lint step.
Example output of the awk script:
config/default_styleset:1:# <-- trailing whitespace
config/default_styleset:3:# <-- trailing whitespace
doc/aerc.1.scd:78: Executes an arbitrary command in the background. Aerc will set the <-- trailing whitespace
doc/aerc.1.scd:234: <-- trailing whitespace
doc/aerc.1.scd:237: <-- trailing whitespace
worker/types/thread_test.go:74: // return ErrSkipThread<-- space(s) followed by tab(s)
worker/lib/testdata/message/invalid/hexa: trailing new line(s)
Fix issues reported by the script.
NB: The ENDFILE match is a GNU extension. It will be ignored on BSD-awk
and trailing new lines will not be detected. The lint make target is
only invoked on alpine linux which has GNU awk anyway.
NB: Empty cells in scdoc tables require trailing white space... Avoid
this by setting content in these cells. I don't really see a use for
empty cells.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Prevent the embarrassing forgotten attachment scenario by warning the
user before sending a message that may need an attachment but does not
have one. Whether a message needs an attachment is determined by testing
a configurable regex against the message body.
Signed-off-by: Jason Cox <dev@jasoncarloscox.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Export AERC_MIME_TYPE and AERC_FILENAME in the filters command
environment. This allows dynamic coloring with tools that require
a filename and/or a mime type to determine the syntax.
Update docs and add example use in the default config file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
To allow referencing built-in filters without hard coding a path during
installation, append the following folders to the exec PATH when running
the filter commands:
~/.config/aerc/filters
~/.local/share/aerc/filters
$PREFIX/share/aerc/filters
/usr/share/aerc/filters
If a filter script has the same name than a command in the default exec
PATH, it will not shadow it. In that edge case, the absolute path to the
filter script must be specified.
Suggested-by: Teo Luppi <me@luppi.uk>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add option to open a message in the message viewer without setting the
seen flag. Enables the message viewer to be used as a preview pane
without changing the message flags unintentionally. Before, the message
viewer would set the seen flag by default. The IMAP backend will now
always fetch the message body with the peek option enabled (same as we
fetch the headers).
An "auto-mark-read" option is added to the ui config which is set to
true by default. If set the false, the seen flag is not set by the
message viewer.
Co-authored-by: "James Cook" <falsifian@falsifian.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When checking for an exKey, aerc inspects the key and the rune of the
event vs the exkey binding. Runes should only be inspected if the key is
a tcell.KeyRune. Some Ctrl-[:alpha:] keys report a rune in tcell, but
aerc does not have these bound to the keystroke definition. Only <C-x>
has a rune bound, and is one of the very few <C-> keys that can actually
be bound to exKey
Only compare the Rune field if the key is of type KeyRune. Otherwise,
compare the Key. Also compare any modifiers with the keystroke/key
event. These changes allow for any control or alt key combination to be
bound to the exkey.
Update documentaiton to reflect that the default keybind is ':', and not
<semicolon>
Fixes: https://todo.sr.ht/~rjarry/aerc/67
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Instead of xdg-open (or open on MacOS), allow forcing a program to open
a message part. The program is determined in that order of priority:
1) If :open has arguments, they will be used as command to open the
attachment. If the arguments contain the {} placeholder, the
temporary file will be substituted, otherwise the file path is added
at the end of the arguments.
2) If a command is specified in the [openers] section of aerc.conf for
the part MIME type, then it is used with the same rules of {}
substitution.
3) Finally, fallback to xdg-open/open with the file path as argument.
Update the docs and default config accordingly with examples.
Fixes: https://todo.sr.ht/~rjarry/aerc/64
Co-authored-by: Jason Stewart <support@eggplantsd.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Having a default value is confusing because to disable the dynamic time
format, the users need to explicitly configure these settings to the
empty string.
Do not set default values for these settings when they are unset in the
configuration. Comment the default config file values to serve as
examples.
Fixes: aae29324fd ("config: fix default time format values")
Reported-by: Nicolai Dagestad <nicolai@dagestad.fr>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Allow showing the current working directory in the statusline via
[statusline] render-format=%p, which is useful if the user changes
directories often.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Some people are worried that they might leak their timezone and wish to
send their mails with the Date header in UTC. For this a new key is
added to the account sections to enforce sending in UTC instead of the
system's timezone.
Suggested-by: "Ricardo Correia" <aerc-lists.sr.ht@wizy.org>
Thanks: to Ricardo for checking and correcting my incorrect assertions
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
outgoing-cred-cmd is used to retrieve the password from a password
manager such as UNIX pass or bitwarden CLI. These tools often prompt for
a passphrase to secure the passwords and it is annoying having to enter
it every time sending an email with aerc.
Add a new option outgoing-cred-cmd-cache (default to true) to control
whether aerc will keep a cache of the password or run outgoing-cred-cmd
every time an email needs to be sent.
NB: If the cached password is incorrect, the only way to change it is to
restart aerc.
Fixes: ca90343850 ("outgoing-cred-cmd: delay execution until an email needs to be sent")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
"behaviour" is not necessarily a typo, but currently 3/4 instances of
the word in the docs use the spelling "behavior".
Signed-off-by: Thomas Faughnan <tom@tjf.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds a setting to the configuration to choose at which level the
folders in the dirtree are collapsed by default.
In my case, this is useful because my organisation has some rather deep
nesting in the folder structure, and a _lot_ of folders, and this way I
can keep my dirtree uncluttered while still having all folders there if
I need them.
Signed-off-by: Sijmen <me@sijman.nl>
Acked-by: Koni Marti <koni.marti@gmail.com>
Document filter input charset
Add w3m filter example to default config
Adapt html and html-unsafe filters
Fixes: https://todo.sr.ht/~rjarry/aerc/65
Signed-off-by: q3cpma <q3cpma@posteo.net>
Acked-by: Robin Jarry <robin@jarry.cc>
These were reported by lintian when packaging aerc 0.11.0. There are
probably others.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
When using multiple accounts, the contacts may be different. Allow using
specific address book commands per account.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add option to specify folder-specific binds for message lists. The binds
are layered: any existing binds in [messages] are overwritten by a more
specific bind in say, [messages:folder=Drafts]. The order is currently:
[messages] < [messages:account=<account>] < [messages:folder=<folder>]
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Add the format specifier %N to the dirlist-format to display compacted
folder names.
A folder such as INBOX/WORK/PROJECT will be compacted to I/W/PROJECT in
the directoy list.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This adds the option "unsafe-accounts-conf" under the section [general]
of aerc.conf. This allows an user to specify if the accounts.conf file
must be restrict to be read by the file owner (0600).
By default it is set to "false".
Signed-off-by: Victor Freire <victor@freire.dev.br>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This is only supported with notmuch and specific imap servers.
Signed-off-by: Kenneth Flak <kennethflak@protonmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
When trying to search in less, keys bound to viewer functions can't be
used as part of the search query, which makes the search useless.
Add a view::passthrough binding mode and a :toggle-key-passthrough
command go toggle in and out of that mode. By default, typing '/' in the
viewer is bound to enabling key passthrough and automatically inserting
'/', to easily enter "less" search mode. When in the passthrough mode,
all bindings are ignored by default. The default binds.conf only defines
a single keybinding in that mode: <Esc> to get back out. $ex is bound to
<C-x> to allow typing colons.
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
We should use the Makefile value of SHAREDIR when searching for config
files and templates etc.
This is important for systems which do not use the standard file
hierarchy or which do not have a consistent location for installing
program files, for example NixOS, which will have a different install
location with every update.
Signed-off-by: Daniel Patterson <me@danielpatterson.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
implement a foldable tree for the directory list. Expand all parent
directories when a hidden directory is selected with the change-folder
command.
folders-sort considers the top-level directories only. The folders and
foldersexclude filters work with the full directory path.
Enable tree view by adding 'dirlist-tree=true' to the config file.
Implements: https://todo.sr.ht/~sircmpwn/aerc2/228
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Instead of using a static SHAREDIR at compile time, use a list of
standard paths to use at runtime for templates, config files and
stylesets.
This implies removing all default filters in the default configuration.
Replace them with basic commands. New users can configure the filters as
they wish.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Introduce an option in aerc.conf to disable the auto-including
of your own address when replying to your own emails (address
replies to the original To: and Cc: instead); default to true
(allow the auto-including)
1 second is a bit excessive. Use 200ms which should cover most quick
folder changes.
Add an option to make that delay configurable by the users.
References: https://todo.sr.ht/~rjarry/aerc/16
Fixes: cb3090956c ("dirlist: skip unnecessary change-folder action")
Suggested-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Allow defining a default template to use when composing new messages.
Add an example to be used for new users.
Signed-off-by: Robin Jarry <robin@jarry.cc>
as per the discussion https://lists.sr.ht/~sircmpwn/aerc/patches/15367
this handles completions in `completer/completer.go` by enabling the
completer to return a `prefix` that will be prepended to the selected
completion candidate.
When using aerc for multiple accounts often bindings might differ
slightly between accounts. For example:
* Account A archives to one directory (:archive)
* Account B archives to monthly directories (:archive month)
Add account specific bindings to allow the user to add a "context" to a
binding group using a context specifier and a regular expression.
Currently the only context specifier is 'account'.
The regular expression is validated against the accounts loaded from
accounts.conf and the configuration fails to load if there are no
matches.
Contextual bindings are merged with global bindings, with contextual
bindings taking precedence, when that context is active.
Bindings are be configured using a generic pattern of
'view:context=regexp'. E.g.:
# Globally Applicable Archiving
[messages]
A = :read<Enter>:archive<Enter>
# Monthly Archiving for 'Mailbox' Account
[messages:account=Mailbox$]
A = :read<Enter>:archive month<Enter>
In the above example all accounts matching the regular expression will
archive in the monthly format - all others will use the global binding.
Signed-off-by: Jonathan Bartlett <jonathan@jonnobrow.co.uk>
New border-char-horizontal and border-char-vertical config settings in
aerc.conf allow users to modify border appearance from the default
1-wide/tall blank space. In stylesets, border.fg now affects the
foreground color when custom characters are defined.
Signed-off-by: Robin Jarry <robin@jarry.cc>
These settings now have a default value.
Fixes: fe7ed940d3 ("config: use dynamic time format for default config")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Koni Marti
Bence Ferdinandy
Robin Jarry
Jason Cox
Tim Culverhouse
Moritz Poldrack
John Gebbie
Thomas Faughnan
Sijmen
q3cpma
Victor Freire
Kenneth Flak
kt programs
Daniel Patterson
inwit
john1doe@ya.ru
Ariel Costas
Parasrah
Jonathan Bartlett
Dian M Fay