outgoing-cred-cmd is used to retrieve the password from a password
manager such as UNIX pass or bitwarden CLI. These tools often prompt for
a passphrase to secure the passwords and it is annoying having to enter
it every time sending an email with aerc.
Add a new option outgoing-cred-cmd-cache (default to true) to control
whether aerc will keep a cache of the password or run outgoing-cred-cmd
every time an email needs to be sent.
NB: If the cached password is incorrect, the only way to change it is to
restart aerc.
Fixes: ca90343850 ("outgoing-cred-cmd: delay execution until an email needs to be sent")
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Enable path globbing using Go's standard library globbing capabilities,
which allows for attaching multiple files at once.
Suggested-by: Anderson John Njahi <johnjahi55@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Make it possible to specify which account(s) to load. Preserve listed
order when creating account tabs.
aerc -a <account-name[,account-name]>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
"behaviour" is not necessarily a typo, but currently 3/4 instances of
the word in the docs use the spelling "behavior".
Signed-off-by: Thomas Faughnan <tom@tjf.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Add language explaining the token_endpoint parameter is actually
optional and what happens when included or omitted.
Signed-off-by: Sean Stiglitz <stigz+sr.ht@netsplit.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds a setting to the configuration to choose at which level the
folders in the dirtree are collapsed by default.
In my case, this is useful because my organisation has some rather deep
nesting in the folder structure, and a _lot_ of folders, and this way I
can keep my dirtree uncluttered while still having all folders there if
I need them.
Signed-off-by: Sijmen <me@sijman.nl>
Acked-by: Koni Marti <koni.marti@gmail.com>
Mark or unmark the shown message threads. Threads must be available in the
message store. Use the -T option for the mark or unmark commands. Can be
used in combination with the toggle flag (-t).
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
When entering visual selection mode, the current selection is deleted.
This patch extends the visual mode behavior to select multiple blocks of
messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Document filter input charset
Add w3m filter example to default config
Adapt html and html-unsafe filters
Fixes: https://todo.sr.ht/~rjarry/aerc/65
Signed-off-by: q3cpma <q3cpma@posteo.net>
Acked-by: Robin Jarry <robin@jarry.cc>
Specify an account parameter in the mailto argument. If not specified,
the selected account is used as default.
Example:
$ aerc 'mailto:user@host?account=Fastmail'
Suggested-by: staceee
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add :check-mail command for ad-hoc checking of mail. Reset timer for
automatic checking if it is enabled.
Suggested-by: staceee
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
These were reported by lintian when packaging aerc 0.11.0. There are
probably others.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
When using multiple accounts, the contacts may be different. Allow using
specific address book commands per account.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add a mode that prevents aerc from quitting normally when an important
task is performed, i.e. when sending a message. The no-quit mode will be
ignored when quit is used with the -f option to force an exit.
Suggested-by: ph14nix[m]
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all messages from an mbox file to the selected folder with the
import-mbox command.
User confirmation is required when the folder already contains messages.
A failed append will be retried a few times. If a backend timeout
occurs, the entire import is stopped to prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Export all message in the current folder to an mbox file. If an error
occurs during the export, aerc retries a few times before giving up to
prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch enables the filtering of a threaded view which uses
server-built threads. Filtering is done server-side, in order to
preserve the use of server-built threads.
In adding this feature, the filtering of notmuch folders was brought up
to feature parity with the other workers. The filters function the same
(ie: they can be stacked). The notmuch filters, however, still use
notmuch syntax for the filtering.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all non-multipart attachments with the -A flag. Rename the flag
for forwarding a full message as an RFC2822 attachments to -F.
Suggested-by: psykose
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Add option to specify folder-specific binds for message lists. The binds
are layered: any existing binds in [messages] are overwritten by a more
specific bind in say, [messages:folder=Drafts]. The order is currently:
[messages] < [messages:account=<account>] < [messages:folder=<folder>]
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add option to cache headers for imap accounts. Cache db is located at
$XDG_CACHE_DIR/aerc/{account name}. The cache is cleaned of stale
entries when aerc is first opened.
Two new account level configuration options are introduced:
* cache-headers (Default: false)
* cache-max-age (Default: 30 days (720 hours))
The change in worker/imap/open.go is to set the selected directory. This
is required to access the UIDVALIDITY field, which is used in
combination with the message ID to form the key for use in the cache db.
The key structure is: "header.{UIDVALIDITY}.{UID}"
Where reasonable, cache does not stop aerc from running. In general, if
there is an error in the cache, aerc should continue working as usual.
Errors are either displayed to the user or logged.
All messages are stored without flags, and when retrieved have the flags
set to SEEN. This is to prevent UI flashes. A new method to
FetchMessageFlags is introduced to update flags of cached headers. This
is done asynchronously, and the user will see their messages appear and
then any flags updated. The message will initially show as SEEN, but
will update to unread. I considered updating the cache with the
last-known flag state, however it seems prudent to spare the R/W cycle
and assume that - eventually - all messages will end up read, and if it
isn't the update will occur rather quickly.
Note that leveldb puts a lock on the database, preventing multiple
instances of aerc from accessing the cache at the same time.
Much of this work is based on previous efforts by Vladimír Magyar.
Implements: https://todo.sr.ht/~rjarry/aerc/2
Thanks: Vladimír Magyar <vladimir@mgyar.me>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: inwit <inwit@sindominio.net>
Reviewed-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
In order to better align to vim functionality: deselect visual mode
selections after performing a command on the selection. This patch also
introduces a new command to allow for re-selecting (remarking) the
previous selection set so that commands can be chained together. The
deselection only applies to msg commands that *do not* move the message
from the store (those types of commands already deselect):
- read/unread
- flag/unflag
- modify-labels
- copy
- pipe
Previous usage to mark several messages as read and deselect all:
Vjjj:read<Enter>:unmark -a<Enter>
New usage, similar to vim:
Vjjj:read<Enter>
To chain a command together:
Vjjj:read<Enter>:remark<Enter>{next command}<Enter>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Reply to iCalendar invitations with three commands: :accept,
:accept-tentative or :decline. Parse a text/calendar request, create a
reply and append it to the composer.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add compose command ("attach-key") to attach the public key associated
with the sending account. Public key is attached in ascii armor format,
with the mimetype set according to RFC 3156 ("application/pgp-keys").
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Add the format specifier %N to the dirlist-format to display compacted
folder names.
A folder such as INBOX/WORK/PROJECT will be compacted to I/W/PROJECT in
the directoy list.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Adds two style options: dirlist_unread and dirlist_recent. These options
apply in layers, in the same way as msglist_* styles do.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This adds the option "unsafe-accounts-conf" under the section [general]
of aerc.conf. This allows an user to specify if the accounts.conf file
must be restrict to be read by the file owner (0600).
By default it is set to "false".
Signed-off-by: Victor Freire <victor@freire.dev.br>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This is only supported with notmuch and specific imap servers.
Signed-off-by: Kenneth Flak <kennethflak@protonmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Keep current message selected when clearing or changing filters and when
toggling threads.
Add -s flag to the clear command to also clear the selected message and
set cursor to the top of the message list.
Implements: https://todo.sr.ht/~rjarry/aerc/36
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Make it possible to specify the color in the style sets by number in
addition to the color name. This allows using colors defined by the
terminal.
Signed-off-by: Tobias Wölfel <tobias.woelfel@mailbox.org>
Acked-by: Robin Jarry <robin@jarry.cc>
Allow saving all message parts that have the content disposition
"attachment" header to a folder.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
When trying to search in less, keys bound to viewer functions can't be
used as part of the search query, which makes the search useless.
Add a view::passthrough binding mode and a :toggle-key-passthrough
command go toggle in and out of that mode. By default, typing '/' in the
viewer is bound to enabling key passthrough and automatically inserting
'/', to easily enter "less" search mode. When in the passthrough mode,
all bindings are ignored by default. The default binds.conf only defines
a single keybinding in that mode: <Esc> to get back out. $ex is bound to
<C-x> to allow typing colons.
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
We should use the Makefile value of SHAREDIR when searching for config
files and templates etc.
This is important for systems which do not use the standard file
hierarchy or which do not have a consistent location for installing
program files, for example NixOS, which will have a different install
location with every update.
Signed-off-by: Daniel Patterson <me@danielpatterson.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
When messages are marked, pipe their contents into the specified
command. The messages are ordered according to their respective
Message-Id headers. This allows applying complete patch series with
a single command.
When piping more than one message, make sure to write them in the mbox
format as git am expects them to be.
Link: https://en.wikipedia.org/wiki/Mbox
Link: https://github.com/git/git/blob/v2.35.1/builtin/mailsplit.c#L15-L44
Signed-off-by: Robin Jarry <robin@jarry.cc>
Reviewed-by: Koni Marti <koni.marti@gmail.com>
Tested-by: akspecs <akspecs@gmail.com>
implement message threading on the message store level using the
jwz algorithm. Build threads on-the-fly when new message headers arrive.
Use the references header to create the threads and the in-reply-to
header as a fall-back option in case no references header is present.
Does not run when the worker provides its own threading (e.g. imap
server threads).
Include only those message headers that have been fetched and are
stored in the message store.
References: https://www.jwz.org/doc/threading.html
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Inwit <inwit@sindominio.net>
Tested-by: akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
