This prevents dereferencing nil when updating RUE counts. This seems to
happen for messages that were not yet loaded, but were selected for
copy operation. This can happen when using `mark -a` command and then
initiating copy operation.
When such message is encountered during RUE counting, it is stopped
and full recount is triggered.
**Original backtrace:**
Error: runtime error: invalid memory address or nil pointer dereference
goroutine 1 [running]:
runtime/debug.Stack()
runtime/debug/stack.go:24 +0x65
git.sr.ht/~rjarry/aerc/logging.PanicHandler()
git.sr.ht/~rjarry/aerc/logging/panic-logger.go:45 +0x64b
panic({0x9e5f80, 0xecc360})
runtime/panic.go:844 +0x258
git.sr.ht/~rjarry/aerc/widgets.(*AccountView).onMessage(0xc0001be870, {0xb7f860?, 0xc00073b4c0?})
git.sr.ht/~rjarry/aerc/widgets/account.go:353 +0xecc
git.sr.ht/~rjarry/aerc/widgets.(*AccountView).Tick(0xc0001be870)
git.sr.ht/~rjarry/aerc/widgets/account.go:116 +0x6c
git.sr.ht/~rjarry/aerc/widgets.(*Aerc).Tick(0xc0003ba000)
git.sr.ht/~rjarry/aerc/widgets/aerc.go:144 +0x7a
main.main()
git.sr.ht/~rjarry/aerc/aerc.go:225 +0xbb8
Signed-off-by: Ensar Sarajčić <dev@ensarsarajcic.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Rewrite of the awk calendar filter to make it posix compliant. Tested
with awk --posix (awk -V = GNU Awk 5.1.1). Also added some improvements
to readability and formatting.
This complements commit 3ef4a3ca05 ("filters: try and make awk scripts
posix compliant").
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch updates the seqNums after an Expunge operation. When an
expunge operation occurs, the seqNum of the deleted message is reported.
The Imap spec [0] states that an immediate decrement of all seqnums greater
than the deleted occurs, even before the next reporting of an expunge
update.
[0]: https://datatracker.ietf.org/doc/html/rfc3501#section-7.4.1
Fixes: https://todo.sr.ht/~rjarry/aerc/61
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
If the last message is deleted, the new selection should be the last
message instead of the first message.
Fixes: https://todo.sr.ht/~rjarry/aerc/59
Reported-by: Sebastien Binet <s@sbinet.org>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Move tab replacement logic for next-message-on-delete into the
callback. This also moves the Invalidate() call into the callback, and
should make imap deletion UI work more reliably - there is a race
condition between the worker and the UI in displaying deleted messages.
This should resolve the race condition, and also only remove the MsgView
tab if the message is actually deleted.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Calling :prev without this check can cause the index to go below 0 if
the current index is smaller than the value being scrolled / incremented
by. This results in the email selector wrapping around from the top to
the bottom most email in the mailbox folder due to changes in ec150f0
'store: fix Select behaviour'.
Signed-off-by: akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor NextPrev to use already existing selection methods and bounds
checking
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix the behavior of the Select(index int) method to select the last
message if an index > len(list) or select from bottom of list for
negative indexes.
Thanks: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
The built-in logging system is rather basic. Implement a multi-level
logger to ease interpreting the logs. Configure the loggers with
prefixes and microsecond precision for timestamps.
Also, prefix the messages with the source file name and line number.
Because of this, enabling the logs has a performance cost. They will
only be enabled when redirecting aerc stdout to a file.
Here is an example output:
DEBUG 2022/07/20 12:52:34.536190 worker.go:45: PostAction *types.FetchDirectoryContents
DEBUG 2022/07/20 12:52:34.536329 worker.go:92: ProcessAction *types.FetchDirectoryContents(2417)
DEBUG 2022/07/20 12:52:34.536407 idler.go:159: idler (0xc00017c000) [idle:false,wait:false] =>(idle) [debounce]
INFO 2022/07/20 12:52:34.536432 threadbuilder.go:59: 130 threads created in 220.796µs
DEBUG 2022/07/20 12:52:34.536449 worker.go:75: ProcessMessage *types.DirectoryInfo(2416)
DEBUG 2022/07/20 12:52:34.536453 idler.go:159: idler (0xc00017c000) [idle:false,wait:false] <=(idle)
DEBUG 2022/07/20 12:52:34.536459 worker.go:45: PostAction *types.FetchDirectoryContents
INFO 2022/07/20 12:52:34.536470 open.go:30: Fetching UID list
INFO 2022/07/20 12:52:34.536689 threadbuilder.go:59: 130 threads created in 201.635µs
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This causes all raw email bodies to be dumped along with actual
debugging messages. I don't believe we neither need nor want such
a thing.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Some contributors use multiple email addresses and/or invalid email
addresses. Add a .mailmap file to de-duplicate and fix contributors
names with git shortlog.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Shuffle the To/Cc/Bcc headers to avoid people from doing reply all to
~sircmpwn/aerc@lists.sr.ht. Also add Cc: aerc-devel so that the lists
archives all have the base message. Unfortunately, there is no way to
prevent people from doing reply all and trying to send emails to
aerc-announce. Putting aerc-announce in Bcc sounds very ugly.
Include the person doing the release as Bcc. sendmail -t does not have
a copy-to=Sent option.
Use base32 and a shorter suffix for Message-ID. base64 is ugly.
Use 'vi' if $EDITOR is unset.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Protect the access to the tabs array and current index with a mutex.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
The Tabs object exposes an array of Tab objects and the current selected
index in that array. The these two fields are sometimes modified in
goroutines, which can lead to data races causing fatal out of bounds
accesses on the tab array.
Hide these fields as private API. Expose only what needs to be seen from
the outside. This will prepare for protecting concurrent access with
a lock in the next commit.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
This function returns an ui.Drawable. Use a more explicit name. This
prepares for adding a new SelectedTab function which will return
an ui.Tab.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
Cleanup existing PartSwitcher before recreating a new one when command
:toggle-headers is executed, ensuring existing part pagers are cleaned
up. This fixes a leak in pager processes when :toggle-headers is
executed repeatedly without closing the message.
Signed-off-by: Jose Lombera <jose@lombera.dev>
Acked-by: Koni Marti <koni.marti@gmail.com>
When opening unread emails from certain people (I won't name any names,
sorry), an annoying error message is displayed on the status line:
could not get section &imap.BodySectionName{BodyPartName:
imap.BodyPartName{Specifier:"", Path:[]int(nil), Fields:[]string(nil),
NotFields:false}, Peek:false, Partial:[]int(nil), value}
This does not occur for already read messages. This issue is similar to
the one that was fixed in commit 8ed95b0d2a ("imap: avoid crash when
replying to unread message").
This happens because the flags are updated in the callback that receives
the message itself. It causes the flag update to arrive in the same
channel/request. Ignore the messages that have an empty body (i.e. only
containing flag updates). This is inherently racy but there seems no way
to get rid of these extra messages.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
This makes it more explicit for non pgp compatible clients. Without
this, they may show "unnamed part" or "noname".
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
These were reported by lintian when packaging aerc 0.11.0. There are
probably others.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
\x escape sequences are GNU specific. Use the octal escape code instead.
filters/calendar is beyond help. It would need a complete rewrite to
make it work with POSIX awk.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This reverts commit d7feb56cbe.
This commit introduced a regression in which upon closing any but the
last tab caused an out of range panic would occur.
Steps to reproduce
- open a tab
- open another tab
- close the first tab
Fixes: https://todo.sr.ht/~rjarry/aerc/58
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
On all terminals, ctrl-i sends a tab character (0x09). For some reason,
tcell.ModCtrl+tcell.KeyCtrlI is interpreted as ctrl-tab.
Similarly, ctrl-m sends a new line (0x0a) and
tcell.ModCtrl+tcell.KeyCtrlM is interpreted as ctrl-enter.
Remove control modifier for these two key definitions only. All others
do not work without them.
Fixes: 7a6c808c04 ("bindings: prepare for more modifers")
Fixes: https://todo.sr.ht/~rjarry/aerc/56
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
When using multiple accounts, the contacts may be different. Allow using
specific address book commands per account.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Ensure abbreviated commit id of fixed length in computed version
regardless of user's configuration. Choose length 12 as safe value.
Link: https://github.com/git/git/commit/dce96489162b
Signed-off-by: Jose Lombera <jose@lombera.dev>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit 3a614e45fc ("threading: enable toggle-threads for server-side
threads") changed the behavior of the msgstore.buildThreads variable to
reflect whether the client needs to build threads or the server will.
However, a call to runThreadbuilder was not updated with an extra
conditional. As a result, threads were built regardless of the state of
the threadedView resulting in a large performance penalty for
non-threaded views with client side threading.
Only run thread builder if threaded view is enabled.
Fixes: 3a614e45fc ("threading: enable toggle-threads for server-side threads")
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Tests in lib/structure_helpers_test.go pass on amd64 platforms but fail
on 386 platforms. This can be reproduced with the following steps:
1. Create a Dockerfile in aerc's source folder:
FROM i386/alpine:edge
RUN apk update && apk upgrade
RUN apk add --no-cache go make scdoc
WORKDIR aerc
COPY . .
RUN make
CMD make tests
2. Build the image:
$ docker buildx build --platform=linux/386 -t test .
3. Run the image:
$ docker run --rm --platform=linux/386 -it test
The test in lib/structure_helpers_test.go will fail.
If the same above steps are done with this patch applied, all tests pass.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Protect the sending of a message by entering the no-quit mode. This
prevents aerc from exiting with the :quit command until the operation is
done or the exit is forced.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Add a mode that prevents aerc from quitting normally when an important
task is performed, i.e. when sending a message. The no-quit mode will be
ignored when quit is used with the -f option to force an exit.
Suggested-by: ph14nix[m]
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use go-mbox for piping out multiple messages in the mbox format.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all messages from an mbox file to the selected folder with the
import-mbox command.
User confirmation is required when the folder already contains messages.
A failed append will be retried a few times. If a backend timeout
occurs, the entire import is stopped to prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Export all message in the current folder to an mbox file. If an error
occurs during the export, aerc retries a few times before giving up to
prevent a hang.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use Aerc as an mbox viewer. Open an mbox file from the command line in a
new tab with the mbox backend. Provide a convenient and quick way to
display emails from an mbox.
Usage: aerc mbox://<path>
where the path can either be a directory or an mbox file. If it is a
directory, every file with an .mbox suffix will be loaded as a folder.
The account config will be copied from the selected account. This allows
the answer emails in the mbox account.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Implement an mbox backend worker. Worker can be used for testing and
development by mocking a backend for the message store. Worker does not
modify the actual mbox file on disk; all operations are performed in
memory.
To use the mbox backend, create an mbox account in the accounts.conf
where the source uses the "mbox://" scheme, such as
source = mbox://~/mbox/
or
source = mbox://~/mbox/file.mbox
If the mbox source points to a directory, all files in this directory
with the .mbox suffix will be opened as folders.
If an outgoing smtp server is defined for the mbox account, replies can
be sent to emails that are stored in the mbox file.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The hldiff and plaintext filter scripts are missing their shebangs.
Add those to be correct and consistent.
Additionally, remove the vim comment, it's unnecessary.
Signed-off-by: Tom Schwindl <schwindl@posteo.de>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This patch refactors reselection of a message during certain operations
(searching, filtering, clearing, deleting, moving, new message arrival).
The addition of server-side filtering for threaded views broke the
existing reselection logic.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch enables the filtering of a threaded view which uses
server-built threads. Filtering is done server-side, in order to
preserve the use of server-built threads.
In adding this feature, the filtering of notmuch folders was brought up
to feature parity with the other workers. The filters function the same
(ie: they can be stacked). The notmuch filters, however, still use
notmuch syntax for the filtering.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch provides a method to report backend capabilities to the UI.
The intial capabilities included in the report are Sort and Thread.
Having these available to the UI enables the client to better handle
server side threading.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Move and Delete commands perform a store.update() when their worker is
completed and also when the method is called. This patch removes the
call performed in the store.Move and store.Delete methods.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Update statusline to display threading status at startup. Previously,
the threading status would only display from a :toggle-threads command.
Users who had the config option threading-enabled would not see the
status, as a result.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This change fixes a panic caused by the selected tab being out of sync
when selecting a new one in widgets.(*Aerc).SelectedTab(). This happens
if the tab is already removed from the list of tabs, but the selection
not yet being updated.
This was achieved by moving the tabs behind updating the selection.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Remove a header when it is empty.
Commit a253e89bda ("compose: prevent sending empty address list
headers") tried to avoid sending empty headers; but instead of deleting
the header, the empty string value was just ignored.
Fixes: https://todo.sr.ht/~rjarry/aerc/55
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
I didn't save the stack trace, but msglist.Selected() can create a panic
for index out of range due to the math operations in the map. My stack
trace resulted in a [-9]. This patch reuses the msgstore.Selected()
method, which already has bounds checking.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
