Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Protect the access to the tabs array and current index with a mutex.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
The Tabs object exposes an array of Tab objects and the current selected
index in that array. The these two fields are sometimes modified in
goroutines, which can lead to data races causing fatal out of bounds
accesses on the tab array.
Hide these fields as private API. Expose only what needs to be seen from
the outside. This will prepare for protecting concurrent access with
a lock in the next commit.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Koni Marti <koni.marti@gmail.com>
This makes it more explicit for non pgp compatible clients. Without
this, they may show "unnamed part" or "noname".
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
This reverts commit d7feb56cbe.
This commit introduced a regression in which upon closing any but the
last tab caused an out of range panic would occur.
Steps to reproduce
- open a tab
- open another tab
- close the first tab
Fixes: https://todo.sr.ht/~rjarry/aerc/58
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Commit 3a614e45fc ("threading: enable toggle-threads for server-side
threads") changed the behavior of the msgstore.buildThreads variable to
reflect whether the client needs to build threads or the server will.
However, a call to runThreadbuilder was not updated with an extra
conditional. As a result, threads were built regardless of the state of
the threadedView resulting in a large performance penalty for
non-threaded views with client side threading.
Only run thread builder if threaded view is enabled.
Fixes: 3a614e45fc ("threading: enable toggle-threads for server-side threads")
Reported-by: akspecs <akspecs@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Akspecs <akspecs@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Tests in lib/structure_helpers_test.go pass on amd64 platforms but fail
on 386 platforms. This can be reproduced with the following steps:
1. Create a Dockerfile in aerc's source folder:
FROM i386/alpine:edge
RUN apk update && apk upgrade
RUN apk add --no-cache go make scdoc
WORKDIR aerc
COPY . .
RUN make
CMD make tests
2. Build the image:
$ docker buildx build --platform=linux/386 -t test .
3. Run the image:
$ docker run --rm --platform=linux/386 -it test
The test in lib/structure_helpers_test.go will fail.
If the same above steps are done with this patch applied, all tests pass.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use Aerc as an mbox viewer. Open an mbox file from the command line in a
new tab with the mbox backend. Provide a convenient and quick way to
display emails from an mbox.
Usage: aerc mbox://<path>
where the path can either be a directory or an mbox file. If it is a
directory, every file with an .mbox suffix will be loaded as a folder.
The account config will be copied from the selected account. This allows
the answer emails in the mbox account.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch refactors reselection of a message during certain operations
(searching, filtering, clearing, deleting, moving, new message arrival).
The addition of server-side filtering for threaded views broke the
existing reselection logic.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch enables the filtering of a threaded view which uses
server-built threads. Filtering is done server-side, in order to
preserve the use of server-built threads.
In adding this feature, the filtering of notmuch folders was brought up
to feature parity with the other workers. The filters function the same
(ie: they can be stacked). The notmuch filters, however, still use
notmuch syntax for the filtering.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This patch adds a config option to force the use of client side threads.
This option will override a servers Thread capability, and only build
threads on the client. It can be enabled contextually. For example:
[ui]
threading-enabled = true
[ui:folder~^Archive]
force-client-threads = true
This config would enable threads for all views, and use client threads
for folders that start with Archive. This can be advantageous if, for
example, the folder is very large and the server has a slow response due
to building threads for the entire mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Enable the :toggle-threads command to work for workers which have Thread
capability. The implementation of that feature has the side effect that
the threading-enabled config option now sets the default view (threaded
or not threaded) for any worker, not just IMAP or notmuch.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Move and Delete commands perform a store.update() when their worker is
completed and also when the method is called. This patch removes the
call performed in the store.Move and store.Delete methods.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This change fixes a panic caused by the selected tab being out of sync
when selecting a new one in widgets.(*Aerc).SelectedTab(). This happens
if the tab is already removed from the list of tabs, but the selection
not yet being updated.
This was achieved by moving the tabs behind updating the selection.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
This patch changes references to uiConfig in function signatures and
structs to be pointers.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Append all non-multipart attachments with the -A flag. Rename the flag
for forwarding a full message as an RFC2822 attachments to -F.
Suggested-by: psykose
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Refactor the attachment handling process in the composer. The composer
can currently only handle attachments that are stored as files (or pgp
keys). This patch removes this limitation so that any message part can
be handled as an attachment. With this we can treat files, pgp keys and
message parts on an equal footing and it will enable us also to easily
forward attachments.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
An non-zero exit code from the execution of gpg during decryption would
prevent aerc from parsing the output of gpg. The output should always be
parsed. Gpg can exit with an error due to not being able to validate a
signature. Aerc handles this error with the UI, and therefore all output
should be parsed regardless of exit state of gpg. The parsing of stdout
will find the errors and report back to aerc properly.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Add error handling for messages that were unable to be encrypted.
Previously, messages that failed encryption would be sent with no
content. This patch adds error handling - when encryption fails, the
user is returned to the Review screen and instructed to check the public
keys for their recipients.
Reported-by: Moritz Poldrack <moritz@poldrack.dev>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Fix the following go vet error:
lib/calendar/calendar.go:191:11: github.com/arran4/golang-ical.Attendee
composite literal uses unkeyed fields
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
In order to better align to vim functionality: deselect visual mode
selections after performing a command on the selection. This patch also
introduces a new command to allow for re-selecting (remarking) the
previous selection set so that commands can be chained together. The
deselection only applies to msg commands that *do not* move the message
from the store (those types of commands already deselect):
- read/unread
- flag/unflag
- modify-labels
- copy
- pipe
Previous usage to mark several messages as read and deselect all:
Vjjj:read<Enter>:unmark -a<Enter>
New usage, similar to vim:
Vjjj:read<Enter>
To chain a command together:
Vjjj:read<Enter>:remark<Enter>{next command}<Enter>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Clean marked messages after new uids are fetched.
Commit 5c5158b3 ("store: remove callbacks on error") removed side
effects in the message store after a longer suspend period but neglected
to remove marked zombie messages.
References: https://todo.sr.ht/~rjarry/aerc/28
Co-authored-by: inwit <inwit@sindominio.net>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Reply to iCalendar invitations with three commands: :accept,
:accept-tentative or :decline. Parse a text/calendar request, create a
reply and append it to the composer.
Suggested-by: Ondřej Synáček <ondrej@synacek.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor lib/crypto/gpg tests to facilitate unit test runs on macos.
Macos creates temporary directories with names too long to call
gpg-agent (108 characters). Additionally, too many concurrent test calls
created IPC errors to gpg-agent. To get around this, tests were given
shorter names and refactored into subtests to create fewer concurrent
tests
Tested on Linux and MacOS.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Skip the tests if gpg is not installed.
Avoid interference with the global ~/.gnupg.
Automatically delete GNUPGHOME at the end of tests.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
Add compose command ("attach-key") to attach the public key associated
with the sending account. Public key is attached in ascii armor format,
with the mimetype set according to RFC 3156 ("application/pgp-keys").
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Add check for public keys of all message recipients (to, cc, and bcc)
before sending the message. Adds an OnFocusLost callback to header
editors to facilitate a callback for checking keys whenever a new
recipient is added (OnChange results in too many keyring checks).
Once encryption is initially set, the callbacks are registered. If a
public key is not available for any recipient, encryption is turned off.
However, notably, the callbacks are still registered meaning as s soon
as the user removes the recipients with missing keys, encryption is
turned back on.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Koni Marti <koni.marti@gmail.com>
Unmark deleted messages and remove pending headers in the callback
function when an error in the backend occurs (e.g. due to connection
issues).
The message store marks messages that should be deleted. If the delete
operation in the backend fails, messages are never unmarked and will
remain rendered as empty lines in the message list. This also affects
the move and archive commands that rely on a copy and delete operation.
A similar issue occurs with the pending headers when the operation to
fetch them fails. In this case, messages will appear as loading
indefinitely in the message list and are never re-fetched because the
corresponding pending headers from the failed operations are still
present.
Fixes: https://todo.sr.ht/~rjarry/aerc/28
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
The gpg decrypt function was catching errors but not returning them.
This patch returns errors that are caught instead of aerc panicking.
Reported-by: ReK2 <rek2@hispagatos.org>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: ReK2 <rek2@hispagatos.org>
Acked-by: Robin Jarry <robin@jarry.cc>
Check that the signing key exists when the user issues the :sign
command. The signing key ID will be displayed in the security status
also, allowing the user to see what key will be used to sign the
message.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Jens Grassel <jens@wegtam.com>
Add the format specifier %N to the dirlist-format to display compacted
folder names.
A folder such as INBOX/WORK/PROJECT will be compacted to I/W/PROJECT in
the directoy list.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
aerc panics when using macOS's default terminal emulator, Terminal.app,
when closing all but aerc's tab:
This error was also written to: /tmp/aerc-crash-20220427-194134.log
panic: Attempted to create context with negative offset [recovered]
panic: Attempted to create context with negative offset
goroutine 1 [running]:
git.sr.ht/~rjarry/aerc/logging.PanicHandler()
/Users/ckuehl/src/aerc/logging/panic-logger.go:47 +0x58c
panic({0x100d077a0, 0x14000032700})
/opt/homebrew/Cellar/go/1.18.1/libexec/src/runtime/panic.go:844 +0x258
git.sr.ht/~rjarry/aerc/lib/ui.(*Context).Subcontext(0x1400013e420?, 0x14000202360?, 0x140000ffc48?, 0x1009a10e4?, 0x100da9440?)
/Users/ckuehl/src/aerc/lib/ui/context.go:47 +0x160
git.sr.ht/~rjarry/aerc/lib/ui.(*Grid).Draw(0x1400013e420, 0x14000202360)
/Users/ckuehl/src/aerc/lib/ui/grid.go:143 +0x2bc
git.sr.ht/~rjarry/aerc/widgets.(*Aerc).Draw(0x1400013e4d0, 0x14000202360)
/Users/ckuehl/src/aerc/widgets/aerc.go:178 +0x30
git.sr.ht/~rjarry/aerc/lib/ui.(*UI).Tick(0x1400022bcc0)
/Users/ckuehl/src/aerc/lib/ui/ui.go:116 +0x248
main.main()
/Users/ckuehl/src/aerc/aerc.go:226 +0x9e8
I'm not entirely sure what the interactions are between the terminal
emulator, aerc's grid, and the space that moves around when the tab bar
disappears because there are no more tabs, but this fixes the issue 100%
of the time and I haven't noticed any issues.
Signed-off-by: Connor Kuehl <cipkuehl@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This commit refactors the internal PGP implementation to make way for
GPG integration.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Ensure CRLF line endings in the pgpmail reader. Fix the pgp signature
verification for maildir and notmuch.
These backends do not return the full message body with CRLF
line endings. But the accepted OpenPGP convention is for signed data to
end with a <CR><LF> sequence (see RFC3156).
If this is not the case the signed and transmitted data are considered
not the same and thus signature verification fails.
Link: https://datatracker.ietf.org/doc/html/rfc3156
Reported-by: Tim Culverhouse <tim@timculverhouse.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Keep current message selected when clearing or changing filters and when
toggling threads.
Add -s flag to the clear command to also clear the selected message and
set cursor to the top of the message list.
Implements: https://todo.sr.ht/~rjarry/aerc/36
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Use contextual ui styleset for tabs and compose widgets. If no account
is selected, use default styleset as fallback.
Fixes: https://todo.sr.ht/~rjarry/aerc/3
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Fix the "no envelope available for this message" error that can occur
when using the same imap mailbox in another mailclient (e.g.
through a webmail interface) at the same time.
Complements the fixes in commit 7fe7fe4 ("ui: fix panic in header
formatter") and commit 074b0a1 ("view,list: fix crash when viewing
incomplete imap messages").
The error is caused when a message attribute update is received by the
message store before the message list had a chance to fetch the proper
header first. In this case, an (incomplete) message info is stored in
the message store and the message list will never fetch the correct
header. To prevent this, add only messages to the store with a non-nil
envelope but make sure that message attribute updates are properly
merged.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Sort the message list even when a filter is applied according to the
sort criteria given by the sort command.
Currently, the sort command has no effect when a filter is in use.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Keep the sort criteria applied to the selected folder until the default
sort order should be restored. Call the sort command without arguments
to restore the default sort order.
The current behavior is that the default sort order is restored as soon
as the folder reloads. This happens often and then the results of the
sort command are lost. This makes the sort command not very
user-friendly. Instead, we should keep the sort criteria applied until
the user explicitly wants to restore the default sort order again.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This callback is actually invoked in a goroutine by time.AfterFunc. The
panic handler must be explicitly installed.
Link: https://github.com/golang/go/blob/go1.18/src/time/sleep.go#L160-L173
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Fix order in the references header when an in-reply-to msg-id is
erroneously added at the beginning instead of at the end. Add
description to the function that cleans up the reference headers for
threading.
Reported-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Since panics still regularly "destroy" the terminal, it is hard to get a
stack trace for panics you do not anticipate. This commit adds a panic
handler that automatically creates a logfile inside the current working
directory.
It has to be added to every goroutine that is started and will repair
the terminal on a panic.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
