This patch sets up the trigger config section of aerc.conf.
Each trigger has its own function which is called from the place where
it is triggered. Currently only the new-email trigger is implemented.
The triggers make use of format strings. For instance, in the new-email
trigger this allows the user to select the trigger command and also the
information extracted from the command and placed into their command.
To actually execute the trigger commands the keypresses are simulated.
Further triggers can be implemented in the future.
Formatting of the command is moved to a new package.
Executing :close on a terminal would panic due to it already having been
removed.
This is also related to the fact that removing a tab doesn't check for
whether it actually found a tab to remove or not.
The grid was not checking there was enough space for the cells so would
just attempt to create subcontexts that don't actually fit.
This attempts to use the remaining space and then if there is no space
then it just skips drawing this cell.
This command allows the user to change tab by giving the tab name. This
can be tab completed too. The previous tab is stored in the tabs module
so that when a new tab is created it is still possible to go to the
previous one.
Normal invocation is :ct folder
Previous tab is :ct -
If the column weights do not collectively divide the extent of the grid
layout then some width was not used and so would not be redrawn,
resulting in previous drawings showing through.
This fixes this by checking if there is any remainingExact width and if
there is it is assigned to the weighted columns by their proportion from
left to right.
This package can be used to provide a source for mapping mock UIDs back
to relevant keys for alternate backends. For example, for the Maildir
backend, we need to map between UID and message file names.
This introduces a new interface `Clickable`. I'd imagine this would be
implemented for most widgets eventually and would allow for programs run
in the terminal to also have their mouse events forwarded to them.
For the tabs it was relatively simple to check that the position of the
click is within the boxes for the tabs. For other components I'd imagine
that some state representing their currently drawn bounding box would be
useful.
imaps+oauthbearer://user:token@host?token_endpoint=...
- the config Source password is used as access token if
no token_endpoint parameter is set
- the config Source password is used as refresh token if
token_endpoint parameter is set, and used to exchange
with an access token
The implementation has only been tested with Gmail.
source = imaps+oauthbearer://{username}:{refersh_token}@imap.gmail.com:993? \
client_id=XX&\
client_secret=XX&\
token_endpoint=https%3A%2F%2Faccounts.google.com%2Fo%2Foauth2%2Ftoken
client credentials created with
https://console.developers.google.com/apis/credentials
refresh token created with
https://github.com/google/gmail-oauth2-tools/blob/master/python/oauth2.py
rel: https://todo.sr.ht/~sircmpwn/aerc2/42
Before, we were using several IMAP-specific concepts to represent
information being displayed in the UI. Factor these structures out of
the IMAP package to make it easier for other backends to provide the
required information.
A sequence-set is an IMAP-specific implementation detail. Throughout the
UI, aerc simply operates using lists of opaque identifiers. In order to
loosen the coupling between the UI and IMAP in particular, replace most
usages of imap.SeqSet with []uint32, leaving the translation to a SeqSet
to the IMAP backend as needed.
Before, the information needed to display different parts of the UI was
tightly coupled to the specific messages being sent back and forth to
the backend worker. Separating out a models package allows us to be more
specific about exactly what a backend is able to and required to
provide for the UI.
The current implementation has three classes of flags:
- readFlag
- delFlag
- flaggedFlag
The logic to check for them should be in parallel if branches rather
than in sequential if-else ladder.
Adds an archive command that moves the current message into the folder
specified in the account config entry.
Supports three layouts at this point:
- flat: puts all messages next to each other
- year: creates a folder per year
- month: same as above, plus folders per month
This also adds a "-p" argument to "cp" and "mv" that works like
"--parents" on mkdir(1). We use this to auto-create the directories
for the archive layout.
This makes it so an atomic `invalid` value is used instead of an unbuffered
channel. When many invalidations kick in, a lot of values were sent to the
channel.
(Since OnInvalidate's callback can be run in any goroutine, we need to be
careful about races here.)
This commit introduces a new Aerc.Tick function that should be called to
refresh the internal state. This in turn makes each AccountView process worker
events.
The UI goroutine repeatedly refreshes the internal state before drawing a new
frame. The reason for this is that many worker messages may need to be
processed for a single frame, and drawing the UI is far slower than refreshing
the internal state. This has been confirmed in my testing (calling Aerc.Tick
only once per frame results in a slower display).
Many synchronization code has been removed. We can now write widgets without
having to care so much about races. The remaining sync users are:
- widgets/spinner: the spinner value is updated from inside an internal
goroutine
- lib/ui/invalidatable: Invalidate may be called from any goroutine
- lib/ui/grid: same
- lib/ui/ui: an internal goroutine needs read access to UI.exit
- worker/types/worker: Worker.callbacks is used for both worker and UI
callbacks
The exact goroutine requirements for Drawable have been documented.
This was is more complicated than others. The cells list is accessed by
multiple goroutines:
- Some change the Grid's contents via AddChild/RemoveChild
- Some call Draw
- Some invalidate the grid via Invalidate
Invalidate calls are tricky to handle because they will also invalidate all
child cells. This will inturn trigger the cellInvalidated callback, which needs
to read the list of cells.
For this reason, we use a sync.RWLock which allows multiple concurrent reads.
Below is the race fixed by this commit.
Read at 0x00c0000bc3d0 by goroutine 7:
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Grid).cellInvalidated()
/home/simon/src/aerc2/lib/ui/grid.go:181 +0x45
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Grid).cellInvalidated-fm()
/home/simon/src/aerc2/lib/ui/grid.go:179 +0x55
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Invalidatable).DoInvalidate()
/home/simon/src/aerc2/lib/ui/invalidatable.go:22 +0x85
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Bordered).contentInvalidated-fm()
/home/simon/src/aerc2/lib/ui/borders.go:39 +0x56
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Invalidatable).DoInvalidate()
/home/simon/src/aerc2/lib/ui/invalidatable.go:22 +0x85
git.sr.ht/~sircmpwn/aerc2/widgets.NewDirectoryList.func1()
/home/simon/src/aerc2/widgets/dirlist.go:81 +0x55
git.sr.ht/~sircmpwn/aerc2/lib/ui.(*Invalidatable).DoInvalidate()
/home/simon/src/aerc2/lib/ui/invalidatable.go:22 +0x85
git.sr.ht/~sircmpwn/aerc2/widgets.(*Spinner).Start.func1()
/home/simon/src/aerc2/widgets/spinner.go:88 +0x82
Previous write at 0x00c0000bc3d0 by main goroutine:
[failed to restore the stack]
Goroutine 7 (running) created at:
git.sr.ht/~sircmpwn/aerc2/widgets.(*Spinner).Start()
/home/simon/src/aerc2/widgets/spinner.go:46 +0x98
git.sr.ht/~sircmpwn/aerc2/widgets.NewDirectoryList()
/home/simon/src/aerc2/widgets/dirlist.go:37 +0x28b
git.sr.ht/~sircmpwn/aerc2/widgets.NewAccountView()
/home/simon/src/aerc2/widgets/account.go:49 +0x5ca
git.sr.ht/~sircmpwn/aerc2/widgets.NewAerc()
/home/simon/src/aerc2/widgets/aerc.go:60 +0x807
main.main()
/home/simon/src/aerc2/aerc.go:65 +0x33e
MessageStore has a lot of exported fields that can be read from the outside.
Each read must be protected, because a call from Update could happen at any
time.
Many Drawable implementations have their own Invalidate and OnInvalidate
functions, with an unexported onInvalidate field. However OnInvalidate and
Invalidate are usually not called in the same goroutine. This results in a race
on this field, e.g.:
Read at 0x00c000094748 by goroutine 7:
git.sr.ht/~sircmpwn/aerc2/widgets.NewDirectoryList.func1()
/home/simon/src/aerc2/widgets/dirlist.go:85 +0x56
git.sr.ht/~sircmpwn/aerc2/widgets.(*Spinner).Start.func1()
/home/simon/src/aerc2/widgets/spinner.go:93 +0x1bb
Previous write at 0x00c000094748 by main goroutine:
[failed to restore the stack]
Goroutine 7 (running) created at:
git.sr.ht/~sircmpwn/aerc2/widgets.(*Spinner).Start()
/home/simon/src/aerc2/widgets/spinner.go:46 +0x8f
git.sr.ht/~sircmpwn/aerc2/widgets.NewDirectoryList()
/home/simon/src/aerc2/widgets/dirlist.go:37 +0x286
git.sr.ht/~sircmpwn/aerc2/widgets.NewAccountView()
/home/simon/src/aerc2/widgets/account.go:50 +0x5ca
git.sr.ht/~sircmpwn/aerc2/widgets.NewAerc()
/home/simon/src/aerc2/widgets/aerc.go:60 +0x800
main.main()
/home/simon/src/aerc2/aerc.go:65 +0x33e
To fix this, introduce a new type, Invalidatable, which protects the field.
Unfortunately the Drawable must be passed to the callback function in
Invalidate, so we still need to re-implement this in each Invalidatable user.
Fix a few potential out of bounds by placing proper checks, which should
be relevant if all tabs are removed for some reason.
Also avoid iterating all tabs in the invalidate handler, since we are
only interested in whether it's the selected tab either way
This is a simple mostly straight forward switch to tcell in favor of
termbox.
It uses the tcell native api (not the compat layer) but does not make
use of most features.
Further changes should include moving to tcell's views.TextArea and the
general built in widget behaviour instead of the current ad hoc
implementation.
Regression: Cursor isn't shown in ex-line
Jeffas
Drew DeVault
Kevin Kuehler
Daniel Bridges
Tuomas Siipola
Ben Burwell
Jeffas
Frode Aannevik
Zach Sisco
Gregory Mullen
Aditya Mahajan
Kevin Kuehler
Robert Günzler
Yash Srivastav
Reto Brunner
Simon Ser
Markus Ongyerth