Add option to specify folder-specific binds for message lists. The binds
are layered: any existing binds in [messages] are overwritten by a more
specific bind in say, [messages:folder=Drafts]. The order is currently:
[messages] < [messages:account=<account>] < [messages:folder=<folder>]
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse http links from a message and display them as completions in the
:open-link command.
Add the following binds to the [view] section in your binds.conf:
<C-l> = :open-link <space>
Parsing can be disabled in aerc.conf by setting parse-http-links to
false in the viewer section.
Thanks to Moritz for the help with the regular expression.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Reviewed-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
Parse the Authentication-Results header and display it in the message
viewer (not enabled by default). DKIM, SPF and DMARC authentication
methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to
have an explicit list of trustworthy hostnames before displaying the
authentication results. Be aware that the authentication headers can be
forged.
To display the results for a specific authentication method, add the
corresponding name to the layout of headers in the viewer section of
aerc.conf, e.g. to display all three, use:
header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC
More information will be displayed when "+" is appended to the
authentication method name, e.g. DKIM+ or SPF+ or DMARC+.
Also, add the trustworthy hosts per account with the trusted-authres
parameter, e.g.
trusted-authres = *
to trust every host or use regular expressions for a finer control.
Multiple hosts can be entered as a comma-separated list. Authentication
results will only be displayed when the host is listed in the
trusted-authres list.
Link: https://datatracker.ietf.org/doc/html/rfc7601
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
Add the format specifier %N to the dirlist-format to display compacted
folder names.
A folder such as INBOX/WORK/PROJECT will be compacted to I/W/PROJECT in
the directoy list.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Tim Culverhouse <tim@timculverhouse.com>
This commit adds gpg system integration. This is done through two new
packages: gpgbin, which handles the system calls and parsing; and gpg
which is mostly a copy of emersion/go-pgpmail with modifications to
interface with package gpgbin. gpg includes tests for many cases, and
by it's nature also tests package gpgbin. I separated these in case an
external dependency is ever used for the gpg sys-calls/parsing (IE we
mirror how go-pgpmail+openpgp currently are dependencies)
Two new config options are introduced:
* pgp-provider. If it is not explicitly set to "gpg", aerc will default to
it's internal pgp provider
* pgp-key-id: (Optionally) specify a key by short or long keyId
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This adds the option "unsafe-accounts-conf" under the section [general]
of aerc.conf. This allows an user to specify if the accounts.conf file
must be restrict to be read by the file owner (0600).
By default it is set to "false".
Signed-off-by: Victor Freire <victor@freire.dev.br>
Acked-by: Robin Jarry <robin@jarry.cc>
Refactor statusline by clearly separating the rendering part from the
text display. Use printf-like format string for statusline
customization.
Document printf-like format string to customize the statusline.
Allow to completely mute the statusline (except for push notifications)
with a format specifier.
Provide a display mode with unicode icons for the status elements.
Implements: https://todo.sr.ht/~rjarry/aerc/34
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
This is only supported with notmuch and specific imap servers.
Signed-off-by: Kenneth Flak <kennethflak@protonmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
When trying to search in less, keys bound to viewer functions can't be
used as part of the search query, which makes the search useless.
Add a view::passthrough binding mode and a :toggle-key-passthrough
command go toggle in and out of that mode. By default, typing '/' in the
viewer is bound to enabling key passthrough and automatically inserting
'/', to easily enter "less" search mode. When in the passthrough mode,
all bindings are ignored by default. The default binds.conf only defines
a single keybinding in that mode: <Esc> to get back out. $ex is bound to
<C-x> to allow typing colons.
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Change the option to enable fuzzy completion to be fuzzy-complete, since
it's no longer only used for folders
Signed-off-by: Kt Programs <ktprograms@gmail.com>
Acked-by: Koni Marti <koni.marti@gmail.com>
We should use the Makefile value of SHAREDIR when searching for config
files and templates etc.
This is important for systems which do not use the standard file
hierarchy or which do not have a consistent location for installing
program files, for example NixOS, which will have a different install
location with every update.
Signed-off-by: Daniel Patterson <me@danielpatterson.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
implement a foldable tree for the directory list. Expand all parent
directories when a hidden directory is selected with the change-folder
command.
folders-sort considers the top-level directories only. The folders and
foldersexclude filters work with the full directory path.
Enable tree view by adding 'dirlist-tree=true' to the config file.
Implements: https://todo.sr.ht/~sircmpwn/aerc2/228
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Instead of using a static SHAREDIR at compile time, use a list of
standard paths to use at runtime for templates, config files and
stylesets.
This implies removing all default filters in the default configuration.
Replace them with basic commands. New users can configure the filters as
they wish.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Introduce an option in aerc.conf to disable the auto-including
of your own address when replying to your own emails (address
replies to the original To: and Cc: instead); default to true
(allow the auto-including)
1 second is a bit excessive. Use 200ms which should cover most quick
folder changes.
Add an option to make that delay configurable by the users.
References: https://todo.sr.ht/~rjarry/aerc/16
Fixes: cb3090956c ("dirlist: skip unnecessary change-folder action")
Suggested-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Allow defining a default template to use when composing new messages.
Add an example to be used for new users.
Signed-off-by: Robin Jarry <robin@jarry.cc>
as per the discussion https://lists.sr.ht/~sircmpwn/aerc/patches/15367
this handles completions in `completer/completer.go` by enabling the
completer to return a `prefix` that will be prepended to the selected
completion candidate.
When using aerc for multiple accounts often bindings might differ
slightly between accounts. For example:
* Account A archives to one directory (:archive)
* Account B archives to monthly directories (:archive month)
Add account specific bindings to allow the user to add a "context" to a
binding group using a context specifier and a regular expression.
Currently the only context specifier is 'account'.
The regular expression is validated against the accounts loaded from
accounts.conf and the configuration fails to load if there are no
matches.
Contextual bindings are merged with global bindings, with contextual
bindings taking precedence, when that context is active.
Bindings are be configured using a generic pattern of
'view:context=regexp'. E.g.:
# Globally Applicable Archiving
[messages]
A = :read<Enter>:archive<Enter>
# Monthly Archiving for 'Mailbox' Account
[messages:account=Mailbox$]
A = :read<Enter>:archive month<Enter>
In the above example all accounts matching the regular expression will
archive in the monthly format - all others will use the global binding.
Signed-off-by: Jonathan Bartlett <jonathan@jonnobrow.co.uk>
New border-char-horizontal and border-char-vertical config settings in
aerc.conf allow users to modify border appearance from the default
1-wide/tall blank space. In stylesets, border.fg now affects the
foreground color when custom characters are defined.
Signed-off-by: Robin Jarry <robin@jarry.cc>
These settings now have a default value.
Fixes: fe7ed940d3 ("config: use dynamic time format for default config")
Signed-off-by: Robin Jarry <robin@jarry.cc>
When using the notmuch backend, it often makes more sense to sort
folders (actual virtual folders, or queries) by the order specified in
the query-map file, rather than alphabetically. This patch introduces a
configuration option (disabled by default) that allows this.
Additionally, due to the notmuch backend previously using maps (which
are order-undefined) to store the list of queries, default query
selection on aerc startup fluctuated. This patch fixes that by using
slices to store query order.
Display threads in the message list. For now, only supported by the
notmuch backend and on IMAP when the server supports the THREAD
extension.
Setting threading-enable=true is global and will cause the message list
to be empty with maildir:// accounts.
Co-authored-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Co-authored-by: Reto Brunner <reto@labrat.space>
Signed-off-by: Robin Jarry <robin@jarry.cc>
When a message has been sent today (or this year) allow formatting the
date differently.
For example, with:
[ui]
index-format=%-25.25n %-25.25D %s
timestamp-format=2006 Jan 02, 15:04 GMT-0700
this-day-time-format=Today at 15:04
this-year-time-format=Jan 02
The message list would look like this (spaces collapsed):
Robin Jarry Today at 16:30 [PATCH 1/2] bindings: prepare for more modifers
bugzilla@dpdk.org Oct 26 [dpdk-dev] [Bug 839] pdump: any subsequent runs of pdump_autotest fail
Holger Levsen 2020 Mar 15, 13:44 GMT+01 +1 (Re: FTP Team -- call for volunteers)
Signed-off-by: Robin Jarry <robin@jarry.cc>
Introduce the ability to configure stylesets, allowing customization of
aerc's look (color scheme, font weight, etc). Default styleset is
installed to /path/to/aerc/stylesets/default.
Introduce the ability to configure stylesets, allowing customization of
aerc's look (color scheme, font weight, etc). Default styleset is
installed to /path/to/aerc/stylesets/default.
Added a 'folders-exclude' option that allows removing selected folders
from the directory list sidebar. My motivating example was that removing
a single folder from the list using Golang regexes seemed pretty hard,
so this is a better way to do it. The excluded folders list is included
in the man page.
The following functionalities are added to configure aerc ui styles.
- Read stylesets from file with very basic fnmatch wildcard matching
- Add default styleset
- Support different stylesets as part of UiConfig allowing contextual
styles.
- Move widgets/ui elements to use the stylesets.
- Add configuration manual for the styleset
This command uses the Postpone folder from the account config to save
messages to. Messages are saved as though they were sent so have a valid
'to' recipient address and should be able to be read back in for later
editing.
This adds the commands pin-tab and unpin-tab. Once pinned a tab lives on
the left of the tabstrip and has a configurable marker, defaulting to `
before its name.
