forked from platypush/platypush
273 lines
8.1 KiB
Python
273 lines
8.1 KiB
Python
import base64
|
|
import json
|
|
import serial
|
|
import threading
|
|
import time
|
|
|
|
from platypush.plugins import Plugin, action
|
|
from platypush.plugins.gpio.sensor import GpioSensorPlugin
|
|
|
|
|
|
class SerialPlugin(GpioSensorPlugin):
|
|
"""
|
|
The serial plugin can read data from a serial device, as long as the serial
|
|
device returns a JSON. You can use this plugin to interact for example with
|
|
some sensors connected through an Arduino. Just make sure that the code on
|
|
your serial device returns JSON values. If you're using an Arduino or any
|
|
ATMega compatible device, take a look at
|
|
https://github.com/bblanchon/ArduinoJson.
|
|
"""
|
|
|
|
def __init__(self, device=None, baud_rate=9600, *args, **kwargs):
|
|
"""
|
|
:param device: Device path (e.g. ``/dev/ttyUSB0`` or ``/dev/ttyACM0``)
|
|
:type device: str
|
|
|
|
:param baud_rate: Serial baud rate (default: 9600)
|
|
:type baud_rate: int
|
|
"""
|
|
|
|
super().__init__(*args, **kwargs)
|
|
|
|
self.device = device
|
|
self.baud_rate = baud_rate
|
|
self.serial = None
|
|
self.serial_lock = threading.Lock()
|
|
self.last_measurement = None
|
|
|
|
|
|
def _read_json(self, serial_port):
|
|
n_brackets = 0
|
|
is_escaped_ch = False
|
|
parse_start = False
|
|
output = bytes()
|
|
|
|
while True:
|
|
ch = serial_port.read()
|
|
if not ch:
|
|
break
|
|
|
|
if ch.decode() == '{' and not is_escaped_ch:
|
|
parse_start = True
|
|
n_brackets += 1
|
|
|
|
if not parse_start:
|
|
continue
|
|
|
|
output += ch
|
|
|
|
if ch.decode() == '}' and not is_escaped_ch:
|
|
n_brackets -= 1
|
|
if n_brackets == 0:
|
|
break
|
|
|
|
is_escaped_ch = ch.decode() == '\\'
|
|
|
|
return output.decode().strip()
|
|
|
|
def _get_serial(self, device=None, baud_rate=None, reset=False):
|
|
if not device:
|
|
if not self.device:
|
|
raise RuntimeError('No device specified nor default device configured')
|
|
device = self.device
|
|
|
|
if baud_rate is None:
|
|
if self.baud_rate is None:
|
|
raise RuntimeError('No baud_rate specified nor default configured')
|
|
baud_rate = self.baud_rate
|
|
|
|
if self.serial:
|
|
if not reset:
|
|
return self.serial
|
|
|
|
self._close_serial()
|
|
|
|
self.serial = serial.Serial(device, baud_rate)
|
|
return self.serial
|
|
|
|
def _close_serial(self):
|
|
if self.serial:
|
|
try:
|
|
self.serial.close()
|
|
self.serial = None
|
|
except Exception as e:
|
|
self.logger.warning('Error while closing serial communication: {}')
|
|
self.logger.exception(e)
|
|
|
|
@action
|
|
def get_measurement(self, device=None, baud_rate=None):
|
|
"""
|
|
Reads JSON data from the serial device and returns it as a message
|
|
|
|
:param device: Device path (default: default configured device)
|
|
:type device: str
|
|
|
|
:param baud_rate: Baud rate (default: default configured baud_rate)
|
|
:type baud_rate: int
|
|
"""
|
|
|
|
if not device:
|
|
if not self.device:
|
|
raise RuntimeError('No device specified nor default device configured')
|
|
device = self.device
|
|
|
|
if baud_rate is None:
|
|
if self.baud_rate is None:
|
|
raise RuntimeError('No baud_rate specified nor default configured')
|
|
baud_rate = self.baud_rate
|
|
|
|
data = None
|
|
|
|
try:
|
|
serial_available = self.serial_lock.acquire(timeout=2)
|
|
if serial_available:
|
|
try:
|
|
ser = self._get_serial(device=device)
|
|
except:
|
|
time.sleep(1)
|
|
ser = self._get_serial(device=device, reset=True)
|
|
|
|
data = self._read_json(ser)
|
|
|
|
try:
|
|
data = json.loads(data)
|
|
except:
|
|
self.logger.warning('Invalid JSON message from {}: {}'.
|
|
format(self.device, data))
|
|
else:
|
|
data = self.last_measurement
|
|
finally:
|
|
try:
|
|
self.serial_lock.release()
|
|
except:
|
|
pass
|
|
|
|
if data:
|
|
self.last_measurement = data
|
|
|
|
return data
|
|
|
|
|
|
@action
|
|
def read(self, device=None, baud_rate=None, size=None, end=None):
|
|
"""
|
|
Reads raw data from the serial device
|
|
|
|
:param device: Device to read (default: default configured device)
|
|
:type device: str
|
|
|
|
:param baud_rate: Baud rate (default: default configured baud_rate)
|
|
:type baud_rate: int
|
|
|
|
:param size: Number of bytes to read
|
|
:type size: int
|
|
|
|
:param end: End of message byte or character
|
|
:type end: int, bytes or str
|
|
"""
|
|
|
|
if not device:
|
|
if not self.device:
|
|
raise RuntimeError('No device specified nor default device configured')
|
|
device = self.device
|
|
|
|
if baud_rate is None:
|
|
if self.baud_rate is None:
|
|
raise RuntimeError('No baud_rate specified nor default configured')
|
|
baud_rate = self.baud_rate
|
|
|
|
if (size is None and end is None) or (size is not None and end is not None):
|
|
raise RuntimeError('Either size or end must be specified')
|
|
|
|
if end and len(end) > 1:
|
|
raise RuntimeError('The serial end must be a single character, not a string')
|
|
|
|
data = bytes()
|
|
|
|
try:
|
|
serial_available = self.serial_lock.acquire(timeout=2)
|
|
if serial_available:
|
|
try:
|
|
ser = self._get_serial(device=device)
|
|
except:
|
|
time.sleep(1)
|
|
ser = self._get_serial(device=device, reset=True)
|
|
|
|
if size is not None:
|
|
for _ in range(0, size):
|
|
data += ser.read()
|
|
elif end is not None:
|
|
if isinstance(end, str):
|
|
end = end.encode()
|
|
|
|
ch = None
|
|
while ch != end:
|
|
ch = ser.read()
|
|
|
|
if ch != end:
|
|
data += ch
|
|
else:
|
|
self.logger.warning('Serial read timeout')
|
|
finally:
|
|
try:
|
|
self.serial_lock.release()
|
|
except:
|
|
pass
|
|
|
|
try:
|
|
data = data.decode()
|
|
except:
|
|
data = base64.encodebytes(data)
|
|
|
|
return data
|
|
|
|
@action
|
|
def write(self, data, device=None, baud_rate=None):
|
|
"""
|
|
Writes data to the serial device.
|
|
|
|
:param device: Device to write (default: default configured device)
|
|
:type device: str
|
|
|
|
:param baud_rate: Baud rate (default: default configured baud_rate)
|
|
:type baud_rate: int
|
|
|
|
:param data: Data to send to the serial device
|
|
:type data: str, bytes or dict. If dict, it will be serialized as JSON.
|
|
"""
|
|
|
|
if not device:
|
|
if not self.device:
|
|
raise RuntimeError('No device specified nor default device configured')
|
|
device = self.device
|
|
|
|
if baud_rate is None:
|
|
if self.baud_rate is None:
|
|
raise RuntimeError('No baud_rate specified nor default configured')
|
|
baud_rate = self.baud_rate
|
|
|
|
if isinstance(data, dict):
|
|
data = json.dumps(data)
|
|
if isinstance(data, str):
|
|
data = data.encode('utf-8')
|
|
|
|
try:
|
|
serial_available = self.serial_lock.acquire(timeout=2)
|
|
if serial_available:
|
|
try:
|
|
ser = self._get_serial(device=device)
|
|
except:
|
|
time.sleep(1)
|
|
ser = self._get_serial(device=device, reset=True)
|
|
|
|
self.logger.info('Writing {} to {}'.format(data, self.device))
|
|
ser.write(data)
|
|
finally:
|
|
try:
|
|
self.serial_lock.release()
|
|
except:
|
|
pass
|
|
|
|
|
|
# vim:sw=4:ts=4:et:
|
|
|